• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.8
• /
• pp.463-467
• /
• 2000

In this paper, the new LIGBT structures with trap injection are proposed to improve switching characteristics of the conventional SOI LIGBT. The Simulations are performed in order to investigate the effects of the positiion, whidth and concentration of trap injection region with a reduced minority carrier lifetime using 2D device simulator MEDICI. Their electrical characteristics are analyzed and the optimum design parameters are extracted. As a result of simulation, the turn off time for the model A with the trap injection is $0.78\mus$. These results indicate the improvement of about 2 times compared with the conventional SOI LIGBT because trap injection prevents minority carriers which is stored in the n-drift region during turn off switching. The latching current is $1.5\times10^{-4}A/\mum$ and forward blocking voltage is 168V which are superior to those of conventional structure. It is shown that the trap injection is very effective to reduce the turn off time with a little increasing of on-state voltage drop if its design and process parameters are optimized.

• Journal of Navigation and Port Research
• /
• v.34 no.2
• /
• pp.117-122
• /
• 2010

Since fuzzy controllers are nonlinear, it is more difficult to set the controller gains and to analyse the stability compared to conventional PID controllers. This paper proposes a fuzzy PD+I controller for tracking control which uses a linear fuzzy inference(product-sum-gravity) method based on a conventional linear PID controller. In this scheme the fuzzy PD+I controller works similar to the control performance as the linear PD plus I(PD+I) controller. Thus it is possible to analyse and design an fuzzy PD+I controller for given systems based on a linear fuzzy PD controller. The scaling factors tuning scheme, another topic of fuzzy controller design procedure, is also introduced in order to fine performance of the fuzzy PD+I controller. The scaling factors are adjusted by a real-coded genetic algorithm(RCGA) in off-line. The simulation results show the effectiveness of the proposed fuzzy PD+I controller for tracking control problems by comparing with the conventional PID controllers.

• CDE review
• /
• v.21 no.2
• /
• pp.61-64
• /
• 2015

In this paper, the FREECAD 0.14 was used for modeling conventional Selfie-stick and the newly proposed Selfie-stick design. The purpose of this paper is to demonstrate the utility of FREECAD 0.14, which is open-source and still in development for further use. After modeling the conventional Selfie-stick, CatiyaV5 was used to assemble FREECAD 0.14 drawn elements. Main issue in newly designed Selfie-stick is the portability. To improve portability of the Selfie-stick, folding mechanism was adopted from folding LED stands. Several mechanisms were adopted to improve user convenience as well. Ansys 14.0 was used for structural analyses of conventional Selfie-stick model and the newly designed model as well. Several simplifications for the models were needed to process the analyses. When analyzing the newly designed model various materials were used one by one to find compatible composition. Using Magnesium Alloy for the stick and the hand grip was found to be compatible. FREECAD was useful for suggestion of the newly designed model but not so much useful to design an actual product. Various efforts would make FreeCAD the best choice for industrial use for free as it is named.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.943-952
• /
• 2018

This paper presents a new type of absolute rotary encoder system based on the affine n-digit N-ary gray code. A brief comparison of the existing encoder systems is carried out in terms of resolution, encoding and decoding principles and number of sensor heads needed. Using the proposed method, two different types of encoder disks are designed, namely, color-coded disk and grayscale coded disk. The designed coded disk pattern is used to manufacture 3 digit 3 ary and 2 digit 5 ary grayscale coded disks respectively. The manufactured disk is used with the light emitter and photodetector assembly to design the entire encode system. Experimental analysis is done on the designed prototype with LabVIEW platform for data acquisition. A comparison of the designed system is done with the traditional binary gray code encoder system in terms of resolution, disk diameter, number of tracks and data acquisition system. The resolution of the manufactured system is 3 times higher than the conventional system. Also, for a 5 digit 5 ary coded encoder system, a resolution approximately 100 times better than the conventional binary system can be achieved. In general, the proposed encoder system gives $(N/2)^n$ times better resolution compared with the traditional gray coded disk. The miniaturization in diameter of the coded disk can be achieved compared to the conventional binary systems.

• Journal of Magnetics
• /
• v.21 no.4
• /
• pp.537-543
• /
• 2016

Currently, an interest in electric vehicles (EVs) exhibited by automakers, government agencies and customers make it as more attractive research. This is due to carbon dioxide emitted by conventional combustion engine that worsens the greenhouse effect nowadays. Since electric motors are the core of EVs, it is a pressing need for researchers to develop advanced electric motors. As one of the candidates, switched flux machine (SFM) is initiated in order to cope with the requirement. This paper proposes a new alternate circumferential and radial flux (AlCiRaF) of permanent magnet switched flux machines (PMSFM) for light weight electric vehicles. Firstly, AlCiRaF PMSFM is compared with the conventional PMSFM based on some design restrictions and specifications. Then the design refinements techniques are conducted by using deterministic optimization method in order to improve preliminary performance of machine. Finally the optimized machine design has achieved maximum torque and power of 47.43 Nm and 12.85 kW, respectively, slightly better than that of conventional PMSFM.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.151-156
• /
• 1991

In this paper, we propose a new algorithm for designing the R-G filter that has optimum performance in terms of mean square sidelobe level(MSSL) for the Barker code. The advantage of the conventional R-G filter lies in its simple structure so that it can be easily implemented. However, the conventional R-G filter dose not have optimum performances in terms of peak sidelobe level(PSL), mean sidelobe level(MSL), and MSSL. Recently, a(R-G)LP filter of which filter coefficients are obtained by the linear programming algorithm was proposed and known to have optimum performance in PSL. The proposed (R-G)LS filter keeps the simple structure of the conventional R-G filter and has the filter coefficients that minimizes the sidelobe in the least square sense. The analytic results show that the proposed (R-G)LS filter has better performances than the conventional R-G filter in terms of PSL, MSL, and MSSL. Compared with (R-G)LP filter, the proposed (R-G)LS filter has better performances in terms of MSL and MSSL. The proposed filter design algorithm can be applied to the other binary codes such as truncated pseudonoise(PN) codes and concatenated codes.

• Structural Engineering and Mechanics
• /
• v.19 no.3
• /
• pp.321-336
• /
• 2005

The structural feasibility of a variety of non-conventional sludge digesters, in the form of thin shells of revolution constructed in concrete, has formed the subject of investigation of a recent programme of research at the University of Cape Town. Such forms are usually known in the literature as "egg-shaped", and the advantages of these over conventional digesters of the wide-cylindrical type are now well-recognised: superior mixing efficiency, less accumulation of deposits at the bottom, easier removal of bottom deposits and surface crust, reduced heat losses, and so forth. With the aim of exploring the structural feasibility of various non-conventional forms for concrete sludge digesters, and making available usable analytical data and practical guidelines for the design of such thin shell structures, a number of theoretical studies have recently been undertaken, and these have covered conical assemblies, spherical assemblies and parabolic ogival configurations. The purpose of the present paper is to bring together the different analytical approaches employed in each of these studies, summarise the main findings in each case, draw comparisons among the various studied configurations with regard to structural efficiency and functional suitability, and make appropriate conclusions and recommendations.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.3
• /
• pp.191-198
• /
• 2002

Cooling tower design procedure was set up using conventional Merkel theory, The design data could be different depending on the characteristic curve that the engineer chose. It reveals that the consistent and reasonable criteria are required based on the exact information of the cooling tower Performance. In this study, an off-design performance analysis program for a counterflow-type cooling tower was developed and verified by comparing with experimental data. Also, the off-design performance with various operating conditions was analyzed.

• IE interfaces
• /
• v.14 no.2
• /
• pp.134-139
• /
• 2001

This paper describes an automatic design system for the parts that compose the power transmission. Power transmission is composed of shaft, gear, clutch, brake and housing. To design power transmission, there are many recurrent calculations and drawings needed with conventional design process. In this paper, we propose three dimensional automatic design system that reduce recurrent calculations and drawings. Developed system consists of two modules; 1) Design expert system module to assist determining design parameters of clutch, brake and gear. 2) Parametric modeling module to make three dimensional solid model automatically. The proposed system has been tested in the fields and found to be a useful system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.232-239
• /
• 2015

Studies on the control of the inverted pendulum type system have been widely reported. This is because it is a typical complex nonlinear system and may be a good model for verifying the performance of a proposed control system. In this paper, we propose the design of some fuzzy logic control (FLC) systems for controlling a Segway-type mobile robot, which is an inverted pendulum type system. We first derive a dynamic model of the Segway-type mobile robot and then analyze it in detail. Next, we propose the design of some FLC systems that have good performance for the control of any nonlinear system. Then, we design two conventional FLC systems for the position and balance control of the Segway-type mobile robot, and we demonstrate their usefulness through simulations. Next, we point out the possibility of simplifying the design process and reducing the computational complexity,, which results from the skew symmetric property of the fuzzy control rule tables. Finally, we design two other FLC systems for position and balance control of the Segway-type mobile robot. These systems have only one input variable in the FLC systems. Furthermore, we observe that they offer similar control performance to that of the conventional two-input FLC systems.