• 천문학논총
• /
• 제30권2호
• /
• pp.261-263
• /
• 2015

The metallicity distribution of globular clusters (GCs) provides a crucial clue for the star formation history of their host galaxy. With the assumption that GCs are generally old, GC colors have been used as a proxy for GC metallicities. Bimodal color distributions of GCs observed in most large galaxies have, for decades, been interpreted as bimodal metallicity distributions, indicating the presence of two populations within a galaxy. However, the conventional view has been challenged by a new theory that non-linear GC color-metallicity relations can cause a bimodal color distribution even from a single-peaked metallicity distribution. Using photometric and spectroscopic data of NGC 5128 GCs in combination with stellar population simulation models, we examine the effect of non-linearity in GC color-metallicity relations on transformation of the color distributions into the metallicity distributions. Although in some colors offsets are present between observations and models for the color-metallicity relations, their overall shape agrees well for various colors. After the offsets are corrected, the observed spectroscopic metallicity distribution is well reproduced via modeled color-metallicity relations from various color distributions having different morphologies. We discuss the implications of our results.

• 감성과학
• /
• 제15권3호
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.

• 전자공학회논문지
• /
• 제52권7호
• /
• pp.77-85
• /
• 2015

본 논문에서는 컬러 패턴의 분해와 가설검정 기법을 이용하여 영상에서 조작된 컬러의 영역을 검출하는 새로운 방법을 제시한다. 디모자이킹으로 보간된 화소는 원 화소보다 적은 분산을 가진다는 것에 착안하여, 통계적 검정을 이용하여 분산의 불일치성을 판단하는 방법을 사용한다. 이를 위해, 컬러 패턴을 각각 디모자이킹 패턴에 따라 분해하는 방법을 도입하여 분산을 계산한다. 또한 보간된 화소와 원 화소의 분산의 차이를 크게 하기 위하여 고역통과 필터링을 적용한다. 실험 결과를 통하여 제안 방법이 컬러 조작 영역을 찾는데 매우 유효하며 기존 방법과 비교하여 우수한 검출 성능을 보이는 것을 확인 할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

• 대한치과의사협회지
• /
• 제18권2호통권131호
• /
• pp.115-119
• /
• 1980

The purpose of this study was to observe clinical behavior on a national dispersant amalgam alloy, KISTCAP which newly developed by the KIST (Korea Instute for Science and Technology) in Korea. The results were as follows: 1. There was no significant difference in manipulating between the above mentioned alloy and the conventional lathe cut alloy. 2. The condensation pressure for this alloy was relatively less than that of conventional one. 3. More time was needed to polish the surface of this amalgam filling body than the conventional one. 4. No notable difference was seen in the over-all clinical behavior between the Whitecap and kistcap, except the latter one showed a little more tendency in redish color.

• 대한전자공학회논문지
• /
• 제15권6호
• /
• pp.52-65
• /
• 1978

회로 해석 프로그램을 이용한 컴퓨터에 의한 칼라 TV 나로 설계를 시도하여 보았다. 칼라 TV의 colorplexed composite video signal은 여러가지 신호가 합쳐진 복합 신호이므로 칼라 TV 회로 설계를 하는 데에는 곤란한 점이 많다. 이 논문에서는 적절한 해석 프로그램을 선정하여 칼라 TV의 Y 영상회로, 색신호 증폭회로, AGC 회로 및 동기분리회로를 설계하는 방법을 기술하였다. 그리고 그 설계 방법이 타당함을 실험적으로 확인하였다.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.11-16
• /
• 2011

This study was aimed to apply thermochromic and photochromic pigments to coating color and to develop a speciality functional coated layer. Two special pigments were added to a conventional coating color. The effects of the special pigments on coating color properties such as water rerention, low-shear viscosity were evaluated. Also the color changes of coated paper was observed under various circumstances. The results showed that the special pigments didn't influence the coating color properties. The coated paper with the special pigments showed four different colors, under various circumstances, implying that thermochromic and photochromic pigments can be used to produce a security paper.

• 한국멀티미디어학회논문지
• /
• 제4권1호
• /
• pp.29-36
• /
• 2001

본 논문에서는 회전 주사 패턴을 사용하여 영상 검색을 위한 효율적인 영상 기술 방법을 제안하였다. 본 논문에서 근회전 주사 패턴을 영상 중심부에 위치시키고, 이를 이용하여 공간 칼라 정보를 기술하였다. 사용된 특징은 회전 대표 칼라와 회전 칼라 질감 그리고 회전 칼라 변화도이다. 제안 방식은 영상의 색상 정보와 그와 관련된 국부적 공간 분포를 효율적으로 기술할 수 있었다. 따라서 위 방식은 영상 검색에 있어 기존방식에 비하여 계산량, 메모리 사용량 등을 줄일 수 있었다.

• 소성∙가공
• /
• 제19권3호
• /
• pp.145-151
• /
• 2010

In case of thin-wall two-color injection molding, flashing often occurs when molten polymer flows into small gap at the parting line in mold with high pressure or under the unbalanced clamping force condition. In this study, flashing was examined in the production of thin-wall notebook case with large area when the rapid heat cycle molding (RHCM) technology was applied to the two-color injection molding. The effects of the RHCM technology on the part properties and weld-lines were compared with conventional injection molding. The flashing caused by the clamping device of the two-color injection molding machine was examined and compared by experiments and CAE analyses.

• 전기학회논문지P
• /
• 제58권2호
• /
• pp.142-147
• /
• 2009

Conventional HP(high pressure) sodium or Metal-halide lamps have a life span of around one year requiring at least annual replacement and maintenance. High Power LED lights require no regular maintenance further increasing savings on replacement bulbs, access equipment and labour costs. New installations benefit from a substantial reduction in the cost of expensive heavy duty cable required for sodium lighting. Especially, LED light can achieve variable color temperature, high functional performance in the field of street light. There are two main method to achieve variable color temperature function of the street light. one method is using RGB multi-chip LED, the other is using Orange-White LED method. In this paper, it was compare RGB Multi-chip LED with white-orange LED for there characteristics performance.