• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.261-263
• /
• 2015

The metallicity distribution of globular clusters (GCs) provides a crucial clue for the star formation history of their host galaxy. With the assumption that GCs are generally old, GC colors have been used as a proxy for GC metallicities. Bimodal color distributions of GCs observed in most large galaxies have, for decades, been interpreted as bimodal metallicity distributions, indicating the presence of two populations within a galaxy. However, the conventional view has been challenged by a new theory that non-linear GC color-metallicity relations can cause a bimodal color distribution even from a single-peaked metallicity distribution. Using photometric and spectroscopic data of NGC 5128 GCs in combination with stellar population simulation models, we examine the effect of non-linearity in GC color-metallicity relations on transformation of the color distributions into the metallicity distributions. Although in some colors offsets are present between observations and models for the color-metallicity relations, their overall shape agrees well for various colors. After the offsets are corrected, the observed spectroscopic metallicity distribution is well reproduced via modeled color-metallicity relations from various color distributions having different morphologies. We discuss the implications of our results.

• Science of Emotion and Sensibility
• /
• v.15 no.3
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.77-85
• /
• 2015

In this paper, we present a new method that can detect forged color region using color pattern decomposition and hypothesis testing approach. On the basis of the fact that the variance of the interpolated pixel is smaller than that of the original pixel, we use a statistical test method to judge the statistical inconsistency of variance. For this, we calculate the variance adopting a color pattern decomposition according to the demosaicking pattern. In addition, we apply high-pass filtering to enlarge the difference between the variances of original and interpolated pixel. Through experimental simulations, we can see that our proposed method can effectively detect forged color regions and shows superior detection performance compared to the conventional method.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

• The Journal of the Korean dental association
• /
• v.18 no.2 s.131
• /
• pp.115-119
• /
• 1980

The purpose of this study was to observe clinical behavior on a national dispersant amalgam alloy, KISTCAP which newly developed by the KIST (Korea Instute for Science and Technology) in Korea. The results were as follows: 1. There was no significant difference in manipulating between the above mentioned alloy and the conventional lathe cut alloy. 2. The condensation pressure for this alloy was relatively less than that of conventional one. 3. More time was needed to polish the surface of this amalgam filling body than the conventional one. 4. No notable difference was seen in the over-all clinical behavior between the Whitecap and kistcap, except the latter one showed a little more tendency in redish color.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.6
• /
• pp.52-65
• /
• 1978

Computer-aided design of color TV circuits has been tried using circuit analysis programs. Due to the complexity of colorplexed composite video signals of the color TV, conventional methods are difficult to apply in the color TV circuit design. This paper describes how to design Y video circuit, chroma cicruit, AGC circuit, and sync separator circuit of color TV using analysis programs.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.11-16
• /
• 2011

This study was aimed to apply thermochromic and photochromic pigments to coating color and to develop a speciality functional coated layer. Two special pigments were added to a conventional coating color. The effects of the special pigments on coating color properties such as water rerention, low-shear viscosity were evaluated. Also the color changes of coated paper was observed under various circumstances. The results showed that the special pigments didn't influence the coating color properties. The coated paper with the special pigments showed four different colors, under various circumstances, implying that thermochromic and photochromic pigments can be used to produce a security paper.

• Journal of Korea Multimedia Society
• /
• v.4 no.1
• /
• pp.29-36
• /
• 2001

This paper proposes an efficient image description method for image retrieval using circular scanning pattern. Therefore, we place the origin of the circular scanning pattern on center point of an image and describe spatial color features of the image using the pattern. The features are Circular Dominant Color, Circular Color Texture, and Circular Color Variation Plot. By the method we can describe color and spatial information of the image at a time, efficiently. Therefore, we can reduce the computational expense and memory usage needed to index the image more than the conventional one does.

• Transactions of Materials Processing
• /
• v.19 no.3
• /
• pp.145-151
• /
• 2010

In case of thin-wall two-color injection molding, flashing often occurs when molten polymer flows into small gap at the parting line in mold with high pressure or under the unbalanced clamping force condition. In this study, flashing was examined in the production of thin-wall notebook case with large area when the rapid heat cycle molding (RHCM) technology was applied to the two-color injection molding. The effects of the RHCM technology on the part properties and weld-lines were compared with conventional injection molding. The flashing caused by the clamping device of the two-color injection molding machine was examined and compared by experiments and CAE analyses.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.142-147
• /
• 2009

Conventional HP(high pressure) sodium or Metal-halide lamps have a life span of around one year requiring at least annual replacement and maintenance. High Power LED lights require no regular maintenance further increasing savings on replacement bulbs, access equipment and labour costs. New installations benefit from a substantial reduction in the cost of expensive heavy duty cable required for sodium lighting. Especially, LED light can achieve variable color temperature, high functional performance in the field of street light. There are two main method to achieve variable color temperature function of the street light. one method is using RGB multi-chip LED, the other is using Orange-White LED method. In this paper, it was compare RGB Multi-chip LED with white-orange LED for there characteristics performance.