• Food Science of Animal Resources
• /
• v.29 no.5
• /
• pp.545-549
• /
• 2009

The functional properties of cheese, such as texture and melt, are known to be controlled by several important parameters. Recently, the characteristics of Ca in cheeses, especially the form of Ca (insoluble (INSOL) or soluble) and the shift in Ca equilibrium (i.e., from INSOL to soluble Ca), during aging has received a lot of attention. The INSOL form of Ca, which is present as a structural form in casein, plays a critical role in determining the functional properties of cheese during the early period of ripening (~1 mon). It seems that there is always a reduction of INSOL Ca content in cheese during ripening and there are also factors that can affect the shift in Ca equilibrium. These factors may include the composition of cheese milk, cheese manufacturing pH, acid development during aging, adopting curd-washing in various methods, pre-acidification of milk, etc. There have been many studies showing that the rheological and melting properties of cheese during ripening were significantly (p<0.05) affected by the shift in Ca equilibrium. Therefore, for cheese makers, it is now possible to predict/manage the functional properties of cheese by monitoring and controlling Ca equilibrium in cheese during aging.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.5
• /
• pp.13-18
• /
• 2018

In this research, regarding the type three blast furnace slag (BS) regulated by KS F 2563 and supplied to actual ready mixed concrete plant, the fineness on specification and actually measured fineness by Blain test were compared, and by applying the hydrometer method used for early prediction of concrete strength, the feasibility of the hydrometer method for acquisition inspection of BS was analyzed. Additionally, the influence of various fineness of BS on properties of cement mortar was also assessed. According to the experimental results of this research, correlation of fineness values between specification and actually measured data were not matched. In the case of the rapid evaluation method using hydrometer, a good relation was shown between the fineness data obtained from hydrometer and Blain test. furthermore, from the cement mortar properties test, there was a good relation was obtained between fineness data from rapid evaluation method by hydrometer and cement mortar properties, while there was no clear relation between fineness data from specification and cement mortar properties. Hence, as a qulity controlling method of BS fineness, a rapid evaluation method using hydrometer is suggested as a new method.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.32.1-32.1
• /
• 2018

Novel soft magnetic materials can be achieved by altering material properties such as morphology, composition, crystallinity, and grain size of soft magnetic alloys. Especially, magnetic properties (i.e., saturation magnetization, coarcivity) of soft magnetics are significantly affected by grain boundaries which act as a control of magnetic domain wall movement. Thus, we herein develop a two-step electroless plating method to control morphology and grain size of FeCo films for excellent magnetic properties. Accordingly, the chemical composition to control the degree of polarization of FeCo alloys was altered by electroless deposition parameters; for example, electrolyte concentration and temperature. The grain size and crystallinity of FeCo alloys was dramatically affected by the reaction temperature because the grain growth mechanism dominantly occurs at $90^{\circ}C$ where as the neucleation only happens at $50^{\circ}C$. By simply controlling the temperature, the micron-sized FeCo grains embedded FeCo film was synthesized where the large grains allow high magnetization originated from larger magnetic domain with low corecivity and the nano-sized grains allow excellent soft magnetic properties due to the magnetic correlation length.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.949-953
• /
• 2003

Blue emitting CaWO$_4$ thin films were deposited by rf magnetron sputtering. The effect of sputtering parameters and annealing conditions on the luminescent properties were investigated. Structural and stoichiometric properties of thin films were affected by $O_2$/Ar gas ratio and substrate temperature. Post-annealing caused the phosphor thin films to emit improved luminescent properties. The atomic composition of films might depend on annealing atmosphere, which resulted in the changes of luminescent properties. Blue-green emission that was due to oxygen vacancies was observed. However, by controlling oxygen defects, only blue emission could be obtained.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.2
• /
• pp.40-44
• /
• 2000

A microscopic study was carried out to get the fundamental informations for the ozone deinking technology. The differential interference microscopic observation showed that ozone treatment was helpful to detach the toner ink from the surface of pulp fiber. The modifications of fiber surfaces by ozone treatment were observed with scanning electron microscope. Modification of fiber surfaces was not severe at the early stage of ozone treatment, but it increased with ozone treatment time and pulp consistency, Therefore, it would be possible to improve the properties of deinked pulp by controlling the condtion of ozone treatment.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.282.2-283
• /
• 2003

The carboxylated acidic non-steroidal antiinflammatory drugs (NSAIDs) constitute the principal class of agents for controlling the pain and inflammation of the rheumatic diseases. It is mostly administered as a racemic mixture like most other drugs with asymmetric carbon atoms. However enantiomers of many racemic drug substances have been shown to posses different pharmacological toxicological properties. (omitted)

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.4
• /
• pp.499-505
• /
• 2006

Regularlization approach to regression can be easily found in Statistics and Information Science literature. The technique of regularlization was introduced as a way of controlling the smoothness properties of regression function. In this paper, we have presented a new method to evaluate linear and non-linear fuzzy regression model based on Tanaka's model using the idea of regularlization technique. Especially this method is a very attractive approach to model non -linear fuzzy data.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.279-286
• /
• 2012

Microstructure tailoring of filler loaded preceramic polymer systems offers a high potential for property improvement of Si-based ceramics and composites. Advancements in manufacturing of bulk materials by controlling microstructure evolution during thermal induced polymer-ceramic transforma-tion and polymer-filler reactions will be presented. Rate controlled pyrolysis, multilayer gradient laminate design and surface modification by gas solid reaction are demonstrated to yield ceramic components of high fractional density and superior mechanical properties. Emerging fields of applications are presented.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.23-28
• /
• 1991

A single-layer neural network with 4$\times$4 input neurons and 4 output neurons is optically implemented. Holographic lenslet arrays are used for the e optical interconnection topology, a liquid crystal light valve(LCLV) is used for controlling optical interconection weights. Using a Perceptron learning rule, it classifics input patterns into 4 different categories. It is shown that the performance of the adaptive neural network depends on the learning rate, the correlation of input patterns, and the nonlinear characteristic properties of the liquid crystal light valve.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.189-198
• /
• 1994

This paper describes the model of a simplified trawl system and a control method by using fuzzy algorithm in controlling the depth of trawl gear. Fuzzy logic control rules are sets of linguistic expression that are used by an experienced performer in real operation. For real time processing of the control rules, the look-up tables are used. Computer simulation results indicate that the proposed fuzzy controller shows fast response with minimum steady-state error and robustness properties to the simulated disturbance.