Browse > Article
http://dx.doi.org/10.4191/kcers.2012.49.4.279

Advancements in Polymer-Filler Derived Ceramics  

Greil, Peter (University of Erlangen-Nuernberg, Department of Materials Science (Glass and Ceramics))
Publication Information
Journal of the Korean Ceramic Society / v.49, no.4, 2012 , pp. 279-286 More about this Journal
Abstract
Microstructure tailoring of filler loaded preceramic polymer systems offers a high potential for property improvement of Si-based ceramics and composites. Advancements in manufacturing of bulk materials by controlling microstructure evolution during thermal induced polymer-ceramic transforma-tion and polymer-filler reactions will be presented. Rate controlled pyrolysis, multilayer gradient laminate design and surface modification by gas solid reaction are demonstrated to yield ceramic components of high fractional density and superior mechanical properties. Emerging fields of applications are presented.
Keywords
Polymer-filler derived ceramics; Rate controlled pyrolysis; Surface modification;
Citations & Related Records
연도 인용수 순위
  • Reference
1 P. Colombo, G. Mera, R. Riedel, and G. D. Sorarù, "Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics," J. Am. Ceram. Soc., 93 1805-37 (2010).
2 R. Riedel, A. Kienzle, W. Dressler, L. Ruwisch, J. Bill, and F. Aldinger, "A Silicoboron Carbonitride Ceramic Stable to $2000^{\circ}C$," Nature, 382 796-8 (1996).   DOI
3 S. R. Shah and R. Raj, "Mechanical Properties of a Fully Dense Polymer Derived Ceramic Made by A Novel Pressure Casting Process," Acta Mater., 50 4093-103 (2002).   DOI
4 R. Kumar, S. Prinz, Y. Cai, A. Zimmermann, F. Aldinger, F. Berger, and K. Muller, "Crystallization and Creep Behaviour of Si-B-C-N Ceramics," Acta Mater., 53 4567-78 (2005).   DOI
5 D. L. Williamson and R. Raj, "A Model for Nano Domains in Polymer-Derived SiCO," J. Am. Ceram. Soc., 89 2188-95 (2006).
6 T. Ishikawa, Y. Kohtoku, K. Kumagawa, T. Yamamura, and T. Nasagawa, "High-Strength Alkali-Resistant Sintered SiC Fibre Stable up to $2200^{\circ}C$," Nature, 391 773-5 (1998).   DOI
7 A. R. Bunsell and A. Piant, "A Review of the Development of Three Generations of Small Diameter Silicon Carbide Fibres," J. Mater. Sci., 41 823-39 (2006).   DOI
8 J. D. Torrey and R. K. Bordia, "Mechanical Properties of Polymer-derived Ceramic Composite Coatings on Steel," J. Eur. Ceram. Soc., 28 253-7 (2008).   DOI
9 C. A. Lewinsohn and S. Elangovan, "Development of Amorphous Non-Oxide Seals for Solid Oxide Fuel Cells," Ceram. Eng. Sci. Proc., 24 317-22 (2003).
10 P. Colombo, "Engineering Porosity in Polymer-Derived Ceramics," J. Eur. Ceram. Soc., 28 1389-95 (2008).   DOI
11 N. R Nagaiah, J. S. Kapat, L. An, and L. Chow, "Novel Polymer Derived Ceramic-High Temperature Heat Flux Sensor for Gas Turbine Environment," J. Phys. : Conf. Ser., 34 458-63 (2006).   DOI
12 L. Liew, W. Zhang, V.M. Bright, L. An, M.L. Dunn, and R. Raj, "Fabrication of SiCN Ceramic MEMS Using Injectable Polymer-Precursor Technique," Sensors and Actuators: A. Physical,, 89 64-70 (2001).   DOI
13 P. Greil, "Net Shape Manufacturing of Polymer Derived Ceramics," J. Eur. Ceram. Soc., 18 1905-14 (1998).   DOI
14 Y. L. Li, H. Fan. D. Su, C. Fasel, and R. Riedel, "Synthesis, Structure and Properties of Bulk Si(O), C Ceramics from Polycarbosilazane," J. Am. Ceram. Soc., 92 2175-218 (2009).   DOI
15 M. Esfehanian, R. Oberacker, T. Fett, and M. J. Hoffmann, "Development of Dense Filler-Free Polymer -Derived SiOC Ceramics by Field-Assisted Sintering," J. Am. Ceram. Soc., 91 3803-5 (2008).   DOI
16 S. Ishihara, H. Gu, J. Bill, F. Aldinger, and F. Wakai, "Densification of Precursor-Derived Si-C-N Ceramics by High-Pressure Hot Isostatic Pressing," J. Am. Ceram. Soc., 85 1706-12 (2002).
17 S.J. Lombardo and Z.C. Feng, "Pressure Distribution During Binder Burnout in Three-dimensional Porous Ceramic Bodies with Anisotropic Permeability," J. Mat. Res., 17 1434-40 (2002).   DOI
18 P. Greil, "Active Filler Controlled Pyrolysis of Preceramic Polymers (AFCOP)," J. Am. Ceram. Soc., 78 835-48 (1995).   DOI   ScienceOn
19 P. Greil, "Pyrolysis of Active and Passive Filler-Loaded Preceramic Polymers" in Handbook of Advanced Ceramics, Edtrs. S. Somiya et al., pp.369-390, Elsevier Inc., 2003.
20 P. E. Sanchez-Jimenez, J. A. Downs, and R. Raj, "Transient Viscous Flow During the Evolution of a Ceramic (Silicon Carbonitride) from a Polymer (Polysilazane)," J. Am. Ceram. Soc., 93 2567-70 (2010).   DOI
21 R. Sachanandani and S.J. Lombardo, "Modeling of Green Body Strength, Internal Pressure and Stress in Porous Ceramic Bodies During Thermal Debinding," J. Ceram. Proc. Res., 12 5-11 (2011).
22 T. Hoefner, "Manufacturing and Properties of Porous Silicate based Ceramics for Ceramic Shaping," PhD Thesis, Univ. Erlangen, Germany, 2009.
23 S.J. Lombardo and R.V. Shende, "Determination of Binder Decomposition Kinetics for Specifying Heating Parameters in Binder Burnout Cycles from Three-Dimensional Porous Green Bodies," J. Am. Ceram. Soc., 85 780-6 (2002).
24 M. Steinau, N. Travitzky, T. Zipperle, and P. Greil, "Functionally Graded Ceramics Derived from Preceramic Polymers," in Advances in Polymer Derived Ceramics and Composites, Ceram. Trans., 213 61-71, Wiley, NY, 2010
25 A. Schkutow, "Measurement of Residual Stresses in Polymer Derived Multilayer Ceramics," Bachelor Thesis, University of Erlangen (2011).
26 R. Larker, "Reaction Sintering and Properties of Silicon Oxynitride Densified by Hot Isostatic Pressing," J. Am. Ceram. Soc., 75 [1] 62-66 (1992).   DOI
27 T. Erny, "Formation and Properties of Polymer Derived Composite Ceramics of the System $MeSi_2$/polysiloxane," PhD Thesis, Univ. Erlangen-Nuernberg, Germany, 1996.
28 S. J. P. Durham, K. Shanker, and R. A. L. Drew, "Carbothermal Synthesis of Silicon Nitride: Effect of Reaction Conditions," J. Am. Ceram. Soc., 74 31-7 (1991).   DOI
29 M. Scheffler, T. Gambaryan-Roisman, T. Takahashi, J. Kaschta, H. Muenstedt, P. Buhler, and P. Greil, "Pyrolytic Decomposition of Organo Polysiloxanes," Ceram. Trans., 115 239-50 (2000).
30 F.L. Riley, "Silicon Nitride and Related Materials," J. Am. Ceram. Soc., 83 245-65 (2000).
31 E. Ionescu, H.J. Kleebe, and R. Riedel, "Silicon-containing Polymer-derived Ceramic Nanocomposites (PDC-NCs) : Preparative Approaches and Properties," Chem. Soc. Rev., DOI: 10.1039/C2CS15319J (2012).
32 J. Cordelair and P. Greil, "Electrical Characterization of Polymethylsiloxane/$MoSi_2$-Derived Composite Ceramics," J. Am. Ceram. Soc., 84 2256-9 (2001).
33 L. Toma, H.-J. Kleebe, M.M. Müller, E. Janssen, R. Riedel, T. Melz, and H. Hanselka, "Correlation Between Intrinsic Microstructure and Piezoresistivity in a SiOC Polymer-Derived Ceramic," J. Am. Ceram. Soc., 95 1056-61 (2012).
34 A. Geissinger, J. Oberle, W. Teschner, H. Boeder, and K.-H. Heussner, "Ceramic Electric Resistor," US Patent 5, 961 888 (1999).
35 S. Jung, D. Seo, S.J. Lombardo, Z.C. Feng, J.K. Chen, and Y. Zhang, "Fabrication using Filler Controlled Pyrolysis and Characterization of Polysilazane PDC RTD Arrays on Quartz Wafers," Sensors and Actuators: A. Physical,, 175 53-9 (2012).   DOI
36 M. Steinau, N. Travitzky, J. Gegner, J. Hofmann, and P. Greil, "Polymer-Derived Ceramics for Advanced Bearing Applications," Adv. Eng. Mat., 10 1141-6 (2008).   DOI
37 X. Yan, X. Cheng, G. Han, R. Hauser, and R. Riedel, "Synthesis and Magnetic Properties of Polymer Derived Metal/SiCN Ceramic Composites," Key Engin. Mat., 353-8, 1485-8 (2007).
38 L. Biasetto, A. Francis, P. Palade, G. Principi, and P. Colombo, "Polymer-derived Micro-cellular SiOC Foams with Magnetic Functionality," J. Mat. Sci., 43 4119-26 (2008).   DOI
39 H. Denver, T. Heiman, E. Martin, A. Gupta, and D.-A. Borca-Tasciuc, "Fabrication of Polydimethylsiloxane Composites with Nickel Nanoparticle and Nanowire Fillers and Study of Their Mechanical and Magnetic Properties," J. Appl. Phys., 106 064909 (2009).   DOI
40 M. Günthner, A. Schütz, U. Glatzel, K. Wang, R.K. Bordia, O. Greißl, W. Krenkel, and G. Motz, "High Performance Environmental Barrier Coatings, Part I: Passive Filler Loaded SiCN System for Steel," J. Eur. Ceram. Soc., 31 3003-10 (2011).   DOI
41 K. Wang, M. Günthner, G. Motz, and R.K. Bordia, "High Performance Environmental Barrier Coatings, Part II: Active Filler Loaded SiOC System for Superalloys," J. Eur. Ceram. Soc., 31 3011-20 (2011).   DOI
42 E. Bernardo, G. Parcianello, P. Colombo, J.H. Adair, A.T. Barnes, J.R. Hellmann, B.H. Jones, J. Kruise, and J.J. Swab, "SiAlON Ceramics from Preceramic Polymers and Nano-sized Fillers: Application in Ceramicjoining," J. Eur. Ceram. Soc., 32 1329-35 (2012).   DOI
43 J. Zeschky, F. Goetz-Neunhoeffer, J. Neubauer, S.H. Jason Lo, B. Kummer, M. Scheffler, and P. Greil, "Preceramic Polymer Derived Cellular Ceramics," Comp. Sci. Techn., 63 2361-70 (2003).   DOI
44 J. Zeschky, J. Lo, T. Hoefner, and P. Greil, "Mg-alloy Infiltrated Si-O-C Foams," Mat. Sci. Eng. A., 215-21 (2005).