• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.1
• /
• pp.53-60
• /
• 2015

For high-accuracy position control of a linear motor, it has been proposed a nonlinear controller including a synchronization algorithm. Linear motors are easily affected by force ripple, friction, and parameter variations because there is no mechanical transmission to reduce the effects of model uncertainties and external disturbances. Synchronization error is also caused by skew motion, model uncertainties, and force disturbance on each axis. Nonlinear effects such as friction and ripple force are estimated and compensated for. The synchronization algorithm is used to reduce the synchronous error of the two side pillars. The performance of the controller is evaluated by computer simulations.

• Smart Structures and Systems
• /
• v.1 no.3
• /
• pp.283-308
• /
• 2005

This paper features about the modeling and design of a fast output sampling feedback controller for a smart Timoshenko beam system for a SISO case by considering the first 3 vibratory modes. The beam structure is modeled in state space form using FEM technique and the Timoshenko beam theory by dividing the beam into 4 finite elements and placing the piezoelectric sensor/actuator at one location as a collocated pair, i.e., as surface mounted sensor/actuator, say, at FE position 2. State space models are developed for various aspect ratios by considering the shear effects and the axial displacements. The effects of changing the aspect ratio on the master structure is observed and the performance of the designed FOS controller on the beam system is evaluated for vibration control.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.720-725
• /
• 1995

The most important problems which should be considered in designing servo controllers are resonance effects and nonlinear friction. These problems exist in almost all the servo systems, especially for the robotic maniplators and numerical control systems and cause difficulties in designing controllers. In this paper, controller design procedure which employs $H_{\infty}$ control theory is proposed for the servo systems with these problems. Sometimes, for these systems, there is a possibility of limit cycles due to the interation between the nonlinear friction and integrator. To check the possibility of limit cycles, describing fuction method is used.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.1
• /
• pp.49-56
• /
• 1990

An induction motor position control system based on the sliding mode control is presented. In the sliding mode control, control function is discontinuous on the hyperplane, which causes harmful effects such a s current harmonics and acoustic noise in the motor drive application. In this study, a low pass filter is introduced between the sliding mode controller output and the motor controller input to reduce these effects. The filter, however, makes the torque response slggish and the system performance may become poor in cost of chattering reduction. To overcome these problems, the bandwidth of the filer is varied according to the error function. It is shown that the proposed sliding mode control with variable-bandwidth filter shows good performance, which is confirmed through experiments.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.348-356
• /
• 2019

The backdrivable servovalve is a desirable component for force and interaction control of hydraulic actuation systems because it provides direct force generation mechanical impedance reduction by its own inherent backdrivability. However, high parametric uncertainty and friction effects inside the hydraulic actuation system significantly degrade its advantage. To solve this problem, this letter presents a disturbance-adaptive robust internal-loop compensator (DA-RIC) to generate ideal interactive control performance from the backdrivable-servovalve-based system. The proposed control combines a robust internal-loop compensator structure (RIC) with an explicit disturbance estimator designed for asymptotic disturbance tracking, such that the controlled system provide stable and ideal dynamic behavior for impedance control, while completely compensating the disturbance effects. With the aid of a backdrivable servovalve, we show that the proposed control structure can be implemented based on a simplified nominal model, and the controller enables implementation without accurate knowledge of the target system parameters and disturbances. The performance and properties of the proposed controller are verified by simulation and experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1676-1679
• /
• 2007

In control of the time delay systems, if the disturbance information can be estimated exactly, the ideal response for the disturbance can be achieved. Therefore, in this paper, a new adaptive disturbance observer for the time delay system control is proposed. The disturbance observer is designed and adaptive laws for adjusting the observer are proposed. The new Smith predictor controller to eliminate the effects of the disturbance can be achieved by adding an estimated disturbance to the Smith model. The improved performances of the proposed system and the adaptive disturbance observer are verified by computer simulation.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.11 no.1
• /
• pp.12-18
• /
• 2011

This paper deals with a new adaptive fuzzy sliding mode controller and its application to an inverted pendulum. We propose a new method of adaptive fuzzy sliding mode control scheme that the fuzzy logic system is used to approximate the unknown system functions in designing the SMC of uncertain nonlinear systems. The controller's construction and its analysis involve sliding modes. The proposed controller consists of two components. Sliding mode component is employed to eliminate the effects of disturbances, while a fuzzy model component equipped with an adaptation mechanism reduces modeling uncertainties by approximating model uncertainties. To demonstrate its performance, the proposed control algorithm is applied to an inverted pendulum. The results show that both alleviation of chattering and performance are achieved.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.109-117
• /
• 2004

A study on gust load alleviation using aircraft control surface was performed. Aeroservoelastic model including control surface controller was formulated and validated by comparing the results of continuous gust response analysis with those of MSC/NASTRAN. Optimal control with output feedback was adopted for designing the control surface controller, and the effects of gust load alleviation was validated by performing the numerical simulation for the controller designed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.245-253
• /
• 2002

A driver model with nervous neuromuscular system was developed to steer a vehicle along the prescribed path during handling simulations. A 3-dimensional vehicle model with 10 DOF and 3 DOF steering handle are used to perform a computer simulation. PID and fuzzy controller are used to perform single and double lane change, and their tracking abilities were compared. The effects of time delay and preview distance are also investigated, and it is demonstrated that the driver model developed can be an aid far objective evaluation of vehicle handling simulation.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.93-95
• /
• 2009

The synchronous PI current controller has been widely used for the high performance PM synchronous drives and generally implemented using a digital signal processor. This paper describes the control characteristics of the digital PI current controller for PM synchronous drives. The stability of the current control system considering the sampling time is investigated and the effects of the mismatched decoupling terms in the discrete-time domain are also discussed. The simulation results are provided to verify the theoretic results.