• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.717-720
• /
• 2000

Event-driven communication protocols such as CAN(Controller Area Network) have inherent packet delays due to the contention process for the use of network medium. These delays are stochastic in nature because most packets arrive at random time instants. The stochastic property of the delay adversely influences the control system's performance in terms of stability, responsiveness and steady-state error. Another problem for safety-critical application such as brake-by-wire systems is the reliability of the communication modules that can fail abruptly. This paper deals with two methods to overcome the above problems : (i) scheduling method that can maintain packet delays under some acceptable level, and (ii) redundancy management of communication modules that prescribes dual-redundancy modules' behavior when one of them fails.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.9-16
• /
• 2010

This paper presents supervisor control methods at a matrix converter controlled overhead crane system based on a controller area network (CAN). Four induction motors are used to drive the gantry, trolley, and hoist at he crane and each motor is controlled by the matrix converter with direct torque control (DTC). Both the position control algorithm and the supervisor control system using CAN are introduced. Simulation and experimental results are carried out to verify the performance of position control at the matrix converter controlled crane system.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.195-198
• /
• 2001

본 논문에서는 최근 그 응용이 증가하고 있는 CAN통신 프로토콜을 이용하여 차량내 network개념을 도입하여 차내 각종 전기신호와 센서 입출력을 제어하는 통합 시스템의 개발에 관한 것을 간략히 기술한다. CAN시스템은 최대 1Mbps의 전송 비트율과 에러검출 및 에러영향의 시스템 내로의 한정 등의 기능이 뛰어난 높은 레벨의 통신 안정성을 가지면서 분산 실시간 제어를 효율적으로 지원하는 serial bus communication프로토콜의 하나이다. 본 연구에서 개발된 시스템은 4개의 독립 제어시스템과 관련 소프트웨어로 구성되어 있으며. 각각의 제어시스템간의 정보의 교환은 CAN통신 프로토콜에 안정적으로 이루어지며 자동차의 고급화와 함께 향후 실용화가 기대된다.

• ETRI Journal
• /
• v.7 no.3
• /
• pp.26-29
• /
• 1985

본 고에서는 cost effective 한 LAN(Local Area Network)구현을 위한 망 인터페이스의 기능을 제시하고, VLSI LAN controller를 이용하며, IBM PC를 위한 network interface board의 설계 방안에 대해서 기술하였다.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.600-603
• /
• 2000

In this paper, we propose the design method of distributed control system using Controller Area Network (CAN). CAN is an advanced serial communication protocol for distributed real-time control systems. It is a contention-based multi-master network whose timeliness properties come from its collision resolution algorithm which gives a high schedulable utilization and guaranteed bus access latency. With proposed method using CAN, we apply to robot controller. The effectiveness of proposed method is demonstrated by the simulation and experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1897-1900
• /
• 2004

In recent years, a lot of industrial equipments have serial communication channel such as FieldBus (CAN, Profibus, etc.) or Ethernet that provides real time communication between industrial equipments. Theses applications include gantry crane, robot, chip mounter, etc.. In this paper, we discuss the synchronization technique for networked multi-motor systems where controllers (commercial servo amps) are distributed and interconnected by CAN (Controller Area Networks). We first describe the equivalent model for the individual servo-amp and motor using the frequency response. We design the $H{\infty}$ controller for motion synchronization. Finally, the synchronization technique using the equivalent model and the $H{\infty}$ controller is verified by the simulation and the experiment.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.2
• /
• pp.109-116
• /
• 2017

In this paper, we propose an Internet of Things (IoT) platform for ocean observation buoys. The proposed system consists of various sensor modules, a gateway, and a remote monitoring site. In order to integrate sensor modules with various communications interfaces, we propose a controller area network (CAN)-based sensor data packet and a protocol for the gateway. The proposed scheme supports the registration and management of sensor modules so as to make it easier for the buoy system to manage various sensor modules. Also, in order to extend communication coverage between ocean observation buoys and the monitoring site, we implement a multi-hop relay network based on a mesh network that can provide greater communication coverage than conventional buoy systems. In addition, we verify the operation of the implemented multi-hop relay network by measuring the received signal strength indication between buoy nodes and by observing the collected data from the deployed buoy systems via our monitoring site.

• ETRI Journal
• /
• v.41 no.4
• /
• pp.452-464
• /
• 2019

The use of wireless body area networks (WBANs) in healthcare applications has made it convenient to monitor both health personnel and patient status continuously in real time through wearable wireless sensor nodes. However, the heterogeneous and complex network structure of WBANs has some disadvantages in terms of control and management. The software-defined network (SDN) approach is a promising technology that defines a new design and management approach for network communications. In order to create more flexible and dynamic network structures in WBANs, this study uses the SDN approach. For this, a WBAN architecture based on the SDN approach with a new energy-aware routing algorithm for healthcare architecture is proposed. To develop a more flexible architecture, a controller that manages all HUBs is designed. The proposed architecture is modeled using the Riverbed Modeler software for performance analysis. The simulation results show that the SDN-based structure meets the service quality requirements and shows superior performance in terms of energy consumption, throughput, successful transmission rate, and delay parameters according to the traditional routing approach.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.799-808
• /
• 2007

BACnet is an international standard communication protocol especially designed for building automation and control systems. BACnet uses the Master-Slave/Token-Passing (MS/TP) protocol as one of its field-level networks. A BACnet MS/TP field controller prototype and MS/TP network monitoring system are developed in this study. This report introduces the design and implementation methodology of a BACnet MS/TP field controller hardware, firmware and protocol stack. This report also presents the implementation methodology of BACnet MS/TP network monitoring system using VTS (Visual Test Shell). The methodologies introduced in this report will facilitate the develop and implementation of the BACnet-based control systems in building automation area.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.53-62
• /
• 2010

Recently, various industrial embedded systems including vehicles controlled electronically are evolving to distributed multi-micro controller system. Accordingly, there is a need for standard CAN(Controller Area Network) protocol that ensures high stability and reliability of communication and is simple to construct object-oriented system with high control efficiency. CAN communication interface used general-purpose processor doesn't have many limitations in various application development because of fixed hardware architecture. This paper design and implement a CAN communication interface system based on FPGA. It is verified function and performance of system through monitoring communication with existing AT90CAN128 controller. Implemented CAN communication interface can be reused in development of application systems based on FPGA. And it provides low-cost, small-size and low-power design advantages.