• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.43-50
• /
• 2009

This paper deals with a novel solid state controller (NSSC) for an isolated asynchronous generator (IAG) feeding 3-phase 4-wire loads driven by constant power prime movers, such as uncontrolled pico hydro turbines. AC capacitor banks are used to meet the reactive power requirement of the asynchronous generator. The proposed NSSC is realized using a set of IGBTs (Insulated gate bipolar junction transistors) based current controlled 2-leg voltage source converters (CC- VSC) and a DC chopper at its DC bus, which keeps the generated voltage and frequency constant in spite of changes in consumer loads. The neutral point of the load is created using aT-configuration of the transformers. The IAG system is modeled in MATLAB along with Simulink and PSB (power system block set) toolboxes. The simulated results are presented to demonstrate the capability of the isolated generating system consisting of NSSC and IAG driven by uncontrolled pico hydro turbine and feeding 3-phase 4-wire loads.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.36-38
• /
• 2018

As the battery capacity requirement increases, battery cells are connected in a parallel configuration. However, the sharing current of each battery cell becomes unequal due to the imbalance between cell's impedance which results the mismatched states of charge (SOC). The conventional fixed-resistance balancing methods have a limitation in battery equalization performance and system efficiency. This paper proposes a battery equalization method based on dynamic resistance technique, which can improve equalization performance and reduce the loss dissipation. Based on the SOC rate of parallel connected battery cells, the switches in the equalization circuit are controlled to change the equivalent series impedance of the parallel branch, which regulates the current flow to maximize SOC utilization. To verify the method, operations of 4 parallel-connected 18650 Li-ion battery cells with 3.7V-2.6Ah individually are simulated on Matlab/Simulink. The results show that the SOCs are balanced within 1% difference with less power dissipation over the conventional method.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.32-37
• /
• 2022

As semiconductors become finer, equipment must perform precise and accurate processes to achieve the desired wafer fabrication requirement. Radio frequency power delivery system in plasma system plays a critical role to generate the plasma, and the role of impedance matching unit is critical to terminate the reflected radio frequency power by modifying the impedance of the matching network in the plasma equipment. Impedance matching unit contains one fixed inductor and two variable vacuum capacitors whose positions are controlled two step motors. Controlling the amount of vacuum variable capacitor should be made as soon as possible when the mismatched impedance is detected. In this paper, we present the impedance matching algorithm using the phase sensor.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.101-103
• /
• 2015

Scientific methods that measure the physical demand requirements of a construction operation have not been arrived at maturity in construction community. It is attributed to the difficulty involved in performing controlled experiments on the operation and its' volatile jobsite environment. This paper presents a method that measures the physical demand requirement of the waterproofing activity and verifies the differences between various operations (e.g., a primer painting and a polyurethane coating) consisting of the activity. Two hypotheses, which are involved in the operations, are summarized as follows: [Hypothesis 1] when one performs the same amount of work; the one's average heart rate required for the polyurethane coating operation is higher than that required for the primer painting operation. [Hypothesis 2] when one performs the same amount of work, the one's break time required for the polyurethane coating operation is longer than that required for the primer painting operation.

• 한국전산구조공학회논문집
• /
• 제29권2호
• /
• pp.187-192
• /
• 2016

일반설계에서 탄성거동을 전제로 구조물을 설계하는 것과 달리 내진설계는 구조물의 소성거동을 규명하고 조정하여 붕괴를 방지하는 것이 목적이다. 일반교량의 경우에 요구되는 붕괴방지수준은 교량의 특정한 구조부재의 소성거동으로 낙교를 방지하여 지진발생 이후에 긴급차량의 통과를 가능하게 하는 것이다. 이러한 소성거동은 연결부분 또는 교각기둥에 제한되고 각 경우에 적절한 조치가 요구된다. 도로교설계기준은 교각기둥에서 소성힌지를 형성하여 연성붕괴기구를 구성하는 설계방식과 함께 철근콘크리트 교각을 하부구조로 하는 교량을 대상으로 연결부분의 항복을 이용하여 취성붕괴기구를 구성하는 연성도 내진설계를 부록으로 제시하고 있다. 이 연구에서는 철근콘크리트 교각기둥과 강재받침으로 설계된 일반교량을 선정하고 연성붕괴기구와 취성붕괴기구를 모두 고려한 붕괴방지 설계절차 및 도로교설계기준에 요구되는 수정사항을 제안하였다.

• The Korean Journal of Pain
• /
• 제10권2호
• /
• pp.185-190
• /
• 1997

Background: Preemptive analgesia is an antinociceptive treatment that prevents the establishment of altered central processing which amplifies postoperative pain. A controversy exists over the effectiveness and clinical value of preemptive analgesia. We studied whether epidural bupivacaine and fentanyl prior to surgery could possibly affect postoperative pain and analgesic demands, as compared to administration of same at end of surgery. Methods: Forty patients scheduled for lower abdominal surgery were randomly assigned to one of two groups and prospectively studied in a double-blind method. Group 1(n=20) received epidural injection of 15 ml bupivacaine 0.25% with fentanyl 100 y g before surgery while group 2(n=20) received the same injection at the end of their surgery respectively. Postoperative analgesia consisted of basal plus patient-controlled mode of epidural bupivacaine and fentanyl from PCA system. Postoperative visual analog pain scores(VAPS), analgesics consumption, supplementary analgesics requirement and side effects were assessed for 3 postoperative days. Results: There were no significant difference in analgesics requirement and pain scores, at any time, during rest or after movement, in measurement between the groups. Conclusions: We conclude no clinical value of effectiveness in administering epidural bupivacaine-fentanyl before surgery as compared to administration after surgery.

• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.669-676
• /
• 2015

In this paper, we described the simulation results of the phase offset performance of a clock in holdover mode which was normally operated in GPS Disciplined Oscillator (GPSDO). In the TIE model, we included the time error term caused by environmental temperature variation because one of the most important parameters of clock phase error is the frequency offset and drift caused by the variation of temperature. For the simulation, we employed Maximum Time Interval Error (MTIE) for the performance evaluation when the frequency offset and drift are estimated by using an Unbiased Finite Impulse Response (UFIR) filter with ladder algorithm. We assumed that the noise in the GPS measurement is white Gaussian with zero mean and 1 ns standard deviation, and temperature linearly varies with a slope of $1{^{\circ}C}$ per hour. From the simulation results, the followings were observed. First, with the estimation error of temperature of less than 3 % and the temperature compensation period of less than 900 seconds, the requirement of CDMA2000 phase synchronization under 10 us could be achieved for more than 40,000 seconds holdover time if we employ an OCXO (Oven Controlled Crystal Oscillator) clock. Second, in order to achieve the requirement of LTE-TDD under 1.5 us for more than 10,000 seconds holdover time, below 3 % estimation error and 500 seconds should be retained if a Rubidium clock is adopted.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1105-1118
• /
• 2015

Battery energy storage devices (ESDs) have become more and more commonplace to maintain the stability of islanded power systems. Considering the limitation in inverter capacity and the requirement of flexibility in the ESD, the droop control was implemented in paralleled ESDs for higher capacity and autonomous operation. Under the conventional droop control, state-of-charge (SoC) errors between paralleled ESDs is inevitable in the discharging operation. Thus, some ESDs cease operation earlier than expected. This paper proposes an adaptive accelerating parameter to improve the performance of the SoC error eliminating droop controller under the constraints of a microgrid. The SoC of a battery ESD is employed in the active power droop coefficient, which could eliminate the SoC error during the discharging process. In addition, to expedite the process of SoC error elimination, an adaptive accelerating parameter is dedicated to weaken the adverse effect of the constraints due to the requirement of the system running. Moreover, the stability and feasibility of the proposed control strategy are confirmed by small-signal analysis. The effectiveness of the control scheme is validated by simulation and experiment results.

• 한국지리정보학회지
• /
• 제9권4호
• /
• pp.71-80
• /
• 2006

수제선의 안쪽인 육역의 경우는 각 역할에 따른 관리주체가 공간 활용 등의 목적으로 인하여 어느 정도 관리가 되고 있지만, 해역의 경우는 육역에 비하여 관리정도가 아주 미비한 실정이다. 하지만 국토공간의 지속적인 개발 관심과 더불어 해양공간의 확보 및 활용에 대한 관심이 높아지면서 해양에 대한 정보 및 환경에 대한 정보 요구도가 높아지고 있는 실정이다. 본 연구의 대상지인 부산은 다른 지역의 연안과는 달리 항만, 관광, 부두 등의 다양한 역할을 하고 있으며, 여러 가지의 환경적 요인을 가지고 있기 때문에 체계적인 관리가 필요하다. 하지만 광범위한 부산연안지역의 해양 오염도를 분석하기 위해서 주요지점 및 많은 지역에서의 데이터 획득이 중요한데 반하여 지속적으로 제공하는 부산연안의 데이터의 수는 한계가 있다. 따라서 본 연구에서는 연안 변화를 분석하기 위해 높은 정보 요구도에 의한 수치해도의 수요증대에 대비하여 수치해도를 이용하여 국립수산과학원에서 제공하는 부산연안의 17개 연안 정점 자료와의 결합을 통하여 속성 및 공간데이터를 구축하고, GIS의 공간통계분석기법을 이용하여 연안의 환경 현황과 연속성 파악을 위한 분석 기법과 효용방안에 대해 제시하고자 한다.

• The Korean Journal of Pain
• /
• 제13권1호
• /
• pp.38-43
• /
• 2000

Background: Preemptive analgesia may decrease postoperative pain by preventing nociceptive inputs generated during surgery. The preemptive effect of intravenous nalbuphine was examined in gynecological surgery. Methods: Forty female patients scheduled for gynecological surgery were randomly allocated into two groups. Each patient received 10 mg of intravenous nalbuphine as a bolus dose at the closure of peritoneum in group I (n=20) and before the skin incision in group II (n=20). After the bolus dose, the intravenous patient controlled analgesia (IV-PCA) which contained 50 mg of nalbuphine, 120 mg of ketorolac, 0.25 mg of droperidol and 90 ml of 5% dextrose water was given continuously at the rate of 2 ml/min. The postoperative visual analogue scale pain score (VAS), the total amount of the analgesics used, the degree of satisfaction of the patients and the developement of side effects were examined for 2 days. Results: VAS were significantly lower in group II than in group I after 9 and 12 hours. The cumulative consumption of analgesics in group II was significantly less than in group I. Most patients were satisfied with this regimen. There were no remarkable side effects. Conclusions: Preemptive analgesia with intravenous nalbuphine decreased postoperative pain and analgesic requirement. The analgesic effect of IV-PCA with nalbuphine-ketorolac was effective in control of postoperative pain in gynecologic surgery.