• Title/Summary/Keyword: Controllable region

검색결과 51건 처리시간 0.03초

4-레벨 인버터를 위한 저변조지수 영역의 DC-링크 전압 제어기법 (A DC-Link Voltage Control Scheme for 4-Level Inverter at Low Modulation Index)

  • 송종환
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2000년도 전력전자학술대회 논문집
    • /
    • pp.325-329
    • /
    • 2000
  • An effective Carrier-Based PWM scheme that enables the instantaneous quality of each branch point voltage of a diode clamped 4-level inverter to be reduced at a low modulation index is described. This scheme presents a computed zero sequence voltage of PWM by the feedback of both DC-link voltages and load currents. The proposed PWM scheme enables to increase the controllable region of DC-link voltage and makes it possible to operate with small DC-link capacitors. The validity of the proposed PWM scheme is verified by simulation results.

  • PDF

볼스크류를 이용한 유정압테이블의 고정밀위치 결정

  • 황주호;박천흥;이후상
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 춘계학술대회 논문집
    • /
    • pp.288-292
    • /
    • 1997
  • Positioning accuracy largely depends on the variation of friction force in guide table, geometric accuracy of feed unit like as ballscrew and controllable accrecy of servo unit, in general. This paper deals with improvement of microstep resolution about hydrostatic table. Torque control mode have a advantage in microstep test, and more stable than velocity control mode in low velocity motion. Hydro static table have the elastic behavior within several .mu.m, so different character exist between the elastic motion and rolling motion. Integral gain is dominant than other gain in elastic motion. In order to improve response time in elastic motion,increasing gain is suggested within the stable region.

비례 위치 제어용 소형 유압 서보 기구의 특성에 관한 연구 (A Study on the Characteristics of the Compact Hydraulic Servo Mechanism for Proportional Position Control)

  • 이승현;송창섭
    • Tribology and Lubricants
    • /
    • 제18권1호
    • /
    • pp.49-54
    • /
    • 2002
  • In this study, the characteristics of the hydraulic servo mechanism for proportional position control of a hydraulic construction eguipment were analyzed using the developed analysis tool. The result were used in the others hydraulic system except construcdtion eguipment to improve the static performance of the system, the system parameter effects on the controllable region and the hydraulic servo mechanism variation were studied.

선형분수변환을 이용한 제어계설계 (Design of control systems by a linear fractional transformation)

  • 김상봉
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.78-88
    • /
    • 1989
  • The fundamental objective of this paper has been to develop a means for incoporating the concept of the linear fractional transformation more generally and easily into multivariable feedback design procedure. When we design a continuous system, generally, we are constrained by design methods which arise specifically for the system. Also, in the design of descrete systems, it is the same concept. But the approach developed in this paper is very flexible in the view that in spite of being the continuous or discrete, the design can be done using a well known design method in both cases. That is, when we design a contnuous system or discrete system, the design can be done by a standard design method of continuous systmes or discrete ones, depending on the choice of the linear fractional transformation. Therefore, it is noted that this concept has broken the unflexibility of the conventional design rules for multivariable control system. In essence, the concept shows that if a given system is controllable, some desirable design, for examples, pole assignment within prespecified region, optimal controllers with poles within prespecified region etc., could be done easily by transforming a desirable region into a standard region, such as the complex left-half plane or the unit disk, by the chosen linear fractional transformation, and then by designing the transformed system using the well known standard results.

  • PDF

중성점 전류 리플을 고려한 3-레벨 인버터의 공간 벡터 펄스폭 변조 기법 (A SVPWM for the Small Fluctuation of Neutral Point Current in Three-level Inverter)

  • 김래영;이요한;현동석
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
    • /
    • pp.33-37
    • /
    • 1998
  • For the high power variable speed applications, the DCTLI(diode clamped three-level inverter) have been widely used. This paper describes the analysis of the neutral point current of the DCTLI and the improved space vector-based PWM strategy considering the switching frequency of power devices, that minimizes the fluctuation of the neutral point current in spite of high modulation index region and low power factor. It contributes to decrease the capacitance of dc-link capacitor bank and to increase the neutral point voltage controllable region. Especially, even if second (or even) order harmonic is induced in load current (at this situation, is was investigated that the general control method can not suppress the neutral point voltage variation), this PWM can provide effective control method to suppress the neutral point voltage variation. Various simulation results by means of Matlab/Simulation are presented to verify the proposed PWM.

  • PDF

시야각 조절이 가능한 고개구율 액정 디스플레이 연구 (Study on Viewing angle controllable Liquid Crystal Display with High Aperture Ratio)

  • 신석재;허정화;임영진;이승희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.173-173
    • /
    • 2010
  • We proposed viewing angle switchable liquid crystal display(LCD) associated with fringe-field switching (FFS) mode with high aperture ratio characteristic. In the device, single pixel is separated into two regions, named as main pixel for displaying images and sub pixel for viewing angle control. In sub pixel region, add the common electrode on the top substrate and the initial alignment of liquid crystal is Hybrid Alignment Nematic (HAN) state. In conclusion, we suggested that the device has high aperture ratio characteristic because the LC directors are rotated in which viewing angle control region are generated fringe electric field.

  • PDF

휠 로더용 폐회로형 부하 감응 유압 제어 시스템의 특성 해석 (The Characteristic Analysis of the Load-sensitive Hydraulic Control System for Closed Center Type of a Wheel Loader)

  • 이승현;송창섭;정춘국
    • 대한기계학회논문집A
    • /
    • 제31권9호
    • /
    • pp.934-942
    • /
    • 2007
  • In this study, the characteristics of the load-sensitive hydraulic control system for closed center type of a wheel loader were analyzed using developed analysis program based on Amesim tool. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the system parameter effects on the controllable region and the pump pressure and load pressure variations were studied. The results were compared with the experimental ones. The results and discussions of the present paper could aid in the design of a load-sensitive hydraulic control system for closed center type.

소형 굴삭기용 브리드 오프 센터형 유압 제어 시스템의 특성 (The Characteristic of the Hydraulic Control System with Bleed-off Center Type of a Compact Excavator)

  • 김준식;이승현;이재원
    • 대한기계학회논문집A
    • /
    • 제32권2호
    • /
    • pp.119-126
    • /
    • 2008
  • In this study, the characteristics of the hydraulic control system with bleed-off center type of a compact excavator were analyzed using developed analysis program. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the system parameter effects on the controllable region and the pump pressure and load pressure variations were studied. The results were compared with the experimental ones. The results and discussions of the present paper could aid in the performance improvement of a hydraulic control system of a compact excavator.

다수의 단극 음원들을 이용한 속이 빈 실린더 형상의 응향 위치 에너지 집적공간 형성방법 (A method of Shaped Sound Focusing Using Multiple Monopole Sources: Hollow Cylinder shape)

  • 박진영;김양한
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.537-540
    • /
    • 2005
  • Shaped Sound Focusing is defined as the generation of acoustically bright zone with a certain shape in space using multiple sources. The acoustically bright zone is a spatially focused region with relatively high acoustic potential energy level. In view of the energy transfer, acoustic focusing using multiple sources is essential because acoustic energy is very small to use other type of energy. It can be done by taking optimization techniques which can be acoustic brigtness control and acoustic contrast control. But it has not been frequently concerned about several cases, so the case of hollow cylinder shaped sound focusing is adapted and there wi11 be arguments about available control variables and spatially controllable region in this case.

  • PDF

실내 라돈환경계의 선량감도분석에 의한 제어매개변수 모델링 (Modeling the Controllable Parameters of Radon Environment System with Dose Sensitivity Analysis)

  • 주운표;장시영;김건중
    • Journal of Radiation Protection and Research
    • /
    • 제16권2호
    • /
    • pp.41-54
    • /
    • 1991
  • 라돈 및 붕괴생성물의 호흡에 의한 인체 피폭선량의 제어가능성을 찾기 위해 다음과 같은 과정을 거쳤다. 1) 라돈에 관련된 기존모델을 토양 기공모델, 실내붕괴 모델, 폐선량계산모델로 분류해석하고, 2) topology이론에 따라 물리유추개념으로써 회로망으로 전환하여, 라돈환경계통을 정식화, 검증계산을 거쳐, 3) 모의계산으로 선량감도를 분석하여 최적 매개변수의 범위를 모색하였다. 매개변수인 환기율, 침적율, 부착율가 제어범위내 변화될 때, 정식화된 111원 연립방정식의 해를 구하여 선량감도를 분석하였으며, 제어매개변수의 선량감도에 의한 효과를 3차원으로 도식화하였다. 본 연구 수행결과, 제어매개변수 변화에 따른 실내의 $^{222}Rn$ 및 Rn-D의 농도 변화과정은 새롭게 해석할 수 있는 벡터감도단층모형으로, 일부 제어매개변수의 조합변화에 따른 선량감도는 3차원 그래프모형으로 나타낼 수 있었다. 선량감도의 3차원 그래프에서는 실내환경의 대표적 매개변수 값 범위에서 변곡점이 나타났으며, 일반적으로 높은 환기조건$(>1h^{-1})$하에서는 공기정화에 의하여 선량이 전반적으로 증가되나, 불충분한 환기조건$(<0.5h^{-1})$하에서는 공기정화에 의하여, 선량이 40%정도로 감소되는 것으로 나타났다 (* 라돈 및 붕괴생성물은 이하 $^{222}Rn$ 및 Rn-D로 통일한다.)

  • PDF