• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Science Education
• /
• v.42 no.3
• /
• pp.371-389
• /
• 2018

This study focuses on the fact that students and teachers commonly have difficulty in 'selecting the topic' in many activities including student-led research that is conducted from topic selection to the drawing of conclusion. The purpose of this study is to develop a manual for science teaching research. The instructional manuals of 4 stages were developed based on practical knowledge that can be implemented in the actual class through previous research and literature. Each stage is composed of , , , and . In the third stage, students are expected to find scientific questions and develop them into research topics through detailed class research on newspaper articles, scientific magazines, traditional knowledge, proverbs, daily life, and textbook experiments. In the experimental group, the final research topic was selected through a variety of sources such as textbook experiments, proverbs, YouTube images, newspaper articles, individual WHY NOTEs, and understood the conditions of the scientific research topic and expressed the variables in the research title. However, in the control group, some students did not consider the research scope of the selected research subjects to be specific or not to be able to study at their level. As a result of giving the students as much autonomy as possible, many groups did not fully understand the previous research and submitted it. Based on the results of this study, it can be concluded that development and use of a 'topic selection stage' centered practice manual for general high school teachers would not only improve the students' abilities to discover solutions to scientific questions, but it will also help shift their attitudes towards science in a positive direction.

• Journal of Life Science
• /
• v.33 no.10
• /
• pp.820-827
• /
• 2023

Since COVID-19 began at the end of 2019, the wearing time of protective clothing used to prevent pathogenic bacteria and virus infection has increased, and the development of safe protective materials that are human-friendly and have antibacterial and antiviral functions has been required. In this study, we investigated the possibility of developing natural antibacterial protection materials using ethanol extract of the medicinal plant Zanthoxylum Piperitum DC. The antibacterial activity assay of the 80% ethanol extract of Z. piperitum DC leaves against various nosocomial infectious bacteria, using the disk diffusion method, showed that Staphylococcus aureus ATCC 25923, Klebsiella pneumoniae ATCC 13883, Salmonella typhimurium, and Aeromonas hydrophila are sensitive to the inhibitory action of the extract. The IC₅₀ values of the ethanol extract against S. aureus, K. pneumoniae, P. vulgaris and A. hydrophila were about 0.59 mg/ml, 0.50 mg/ml, 1.06 mg/ml, and 0.06 mg/ml, respectively. To determine whether the ethanol extract of Z. piperitum DC leaves can be applied to the development of antibacterial protective fabric, the ethanol extract was tested using a protective fabric from the KM Health Care Corp. using the JIS L1902-Absorption method. As a result, the bacteriostatic and bactericidal activity values of S. aureus ATCC 25923 and K. pneumoniae ATCC 13883 appeared to be more than 2.0 when treated with the ethanol extract at a concentration of 1% (w/v). Together, these results suggest that Z. piperitum DC leaves can be applied to develop natural antibacterial functional protective fabrics.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.67-76
• /
• 2013

Landfill require special care due to the dangers of nearby surface water and underground water pollution caused by leakage of leachate. The leachate does not leak due to the installation of the geomembrane but sharp wastes or landfill equipment can damage the geomembrane and therefore a means of protecting the geomembrane is required. In Korea, in accordance with the waste control act being modified in 1999, protecting the geosynthetics liner on top of the slope of landfill and installing a drainage layer to fluently drain leachate became mandatory, and technologies are being researched to both protect the geomembrane and quickly drain leachate simultaneously. Therefore, this research has its purpose in studying the drainage functions of leachate and protection functions of the geomembrane in order to examine the application possibilities of Geo-Multicell-Composite (GMC) as a Leachate Collection Removal and Protection System (LCRPs) at the slope on top of the geomembrane of landfill by observing methods of inserting filler with high-quality water permeability at the drainage net. GMC's horizontal permeability coefficient is $8.0{\times}10^{-4}m^2/s$ to legal standards satisfeid. Also crash gravel used as filler respected by vertical permeability is 5.0 cm/s, embroidering puncture strength 140.2 kgf. A result of storm drain using artificial rain in GMC model facility, maxinum flow rate of 1,120 L/hr even spray without surface runoff was about 92~97% penetration. Further study, instead of crash gravel used as a filler, such as using recycled aggregate utilization increases and the resulting construction cost is expected to savings.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.4
• /
• pp.421-432
• /
• 2016

In order to find new functional materials for the cosmetics application, we investigated anti-inflammatory and whitening effects of the Protaetia brevitarsis seulensis (P. brevitarsis) extracts, which were prepared by the various oriental conversion methods, as follows; fresh, roasted one time, roasted two times, roasted three times, and steamed. 2,2-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities of the various solvent extracts (80% ethanol, 50% ethanol, ethyl acetate, hexane) of P. brevitarsis extracts were 85.5, 22.4, 37.0 and 19.4% respectively. The 80% ethanol extract with the highest antioxidant activity was used for all experiments. In case of antioxidant activity test of the extracts, all the extracts showed the activities in concentration dependent manner regardless of the sample preparation methods. Superoxide dismutase-like (SOD-like) activities of the extracts roasted three times and steamed were 62.9 and 55.9%, respectively in $500{\mu}g/mL$. Effects of extracts on the inflammation of RAW 264.7 cell induced by lipopolysaccharide (LPS) showed decreasing tendency of $NO{\cdot}$ and prostaglandin $E_2$ ($PGE_2$) production; PBS fresh (38.0%), PBS roasted one time (41.0%), PBS roasted two times (69.8%), PBS roasted three times (70.1%), PBS steamed (78.5%). Intracellular tyrosinase and melanin biosynthesis inhibitory activities of the extracts were decreased in a concentration dependent manner. However, the fresh P. brevitarsis extracts without the oriental conversion method showed 90.7% decrease compared to the control group treated with ${\alpha}$-MSH alone at $500{\mu}g/mL$. Taken together, these results suggest the oriental conversion method can be applied in development of cosmetic materials in order to improve anti-inflammatory and whitening effects of the cosmetics products.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1075-1082
• /
• 2016

In order to calculate the optimum installation interval between a speed hump and hump type crosswalk that are installed continuously in succession, this study examined the speed of a vehicle that passes different intervals between speed humps and hump type crosswalks from the approach section of a roundabout having a maximum speed limit of 30km/h; analyzed the effects of speed humps and hump type crosswalks installed continuously in succession on vehicle driving speed; and simulated the optimum installation height of hump type crosswalk. As a result, the following conclusion was drawn. First, it was found that the optimum interval between a speed hump and hump type crosswalk, which are the representative traffic calming techniques for reducing vehicle speed, to control vehicle speed under 30km/h is 30m. Second, as a result of comparing the deceleration of a vehicle that pass hump type crosswalks, it was found that if the installation interval is 65 m and above, a speed hump and hump type crosswalk had no effect. Therefore, it is desirable that the maximum installation interval between a speed hump and hump type crosswalk for controlling vehicle speed within a fixed road section should not exceed 65m. Third, the analysis showed that the optimum installation height of hump type crosswalk is 6-8cm in case vehicle speed at the approach section is 20km/h or lower, 8-10cm in case of 30km/h, and 10cm in case of 30km/h or higher, respectively. Fourth, even at a road section on which a speed hump and hump type crosswalk are installed, speed reduction effects may sometimes be insignificant due to a driver's studying effect, traffic conditions and so on. Thus, it is judged that speed reduction effects will be greater if several traffic calming techniques such as speed hump, chicane, and choker are applied at the same time. Therefore, in case of applying traffic calming techniques for the purpose of reducing vehicle speed in order to promote pedestrian safety, the composite application of several techniques should be considered.

• Journal of health informatics and statistics
• /
• v.43 no.4
• /
• pp.307-317
• /
• 2018

Objectives: This study aimed to verify the effectiveness of Internet-based intervention programs for adults with diabetes by conducting a meta-analysis of studies conducted since 2000. Methods: We conducted a systematic review of research papers published in domestic and overseas journals from January 2000 to December 2015, and selected 9 papers that met the analysis criteria. Data analysis was performed using the open source statistical software R 3.5.0, to analyze the effectiveness of Internet-based interventions on experimental and control groups. Results: The analysis showed that intervention programs for controlling HbA1c levels in adult patients with diabetes most commonly comprised 7 sessions on Internet-based management (77.8%), and the most common frequency of application of intervention programs was 4 session in 6 months (33.4%). The present meta-analysis revealed statistically significant effects of Internet-based intervention activities (SMD = 0.92, 95% CI 0.45-1.40). The analysis of the effect size according to the intervention period showed that the 3-month, 6-month, and 12-month interventions reported in eight studies (89%) had a high effect on the Internet-based intervention group. Conclusions: The results of this study confirm the effectiveness of Internet-based intervention programs for adult patients with diabetes. The need for research on the utilization of Internet-based intervention programs for the steady management of diabetes, a chronic disease; for the development of specific guidelines for intervention activities; and for establishing appropriate protocols are acknowledged.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.377-388
• /
• 2023

Carbon management is emerging as an important factor for global warming control, and land use change is considered one of the causes. To quantify the changes in carbon stocks due to development, this study attempted to calculate carbon storage by borrowing the formula of the InVEST Carbon Storage and Sequestration Model (InVEST Model). Before analyzing carbon stocks, a carbon pool was compiled based on previous studies in Korea. Then, we estimated the change in carbon stocks according to the development of Osong National Industrial Park (ONIP) and the application of alternatives. The analysis shows that 16,789.5 MgC will be emitted under Alternative 1 and 16,305.3 MgC under Alternative 2. These emissions account for 44.4% and 43.1% of the pre-project carbon stock, respectively, and shows that choosing Alternative 2 is advantageous for reducing carbon emissions. The difference is likely due to the difference in grassland area between Alternatives 1 and 2. Even if Alternative 2 is selected, efforts are needed to increase the carbon storage effect by managing the appropriate level of green cover in the grassland, creating multi-layered vegetation, and installing low-energy facilities. In addition, it is suggested to conserve wetlands that can be lost during the stream improvement process or to create artificial wetlands to increase carbon storage. The assessment of carbon storage using carbon pools by land cover can improve the objectivity of comparison and evaluation analysis results for land use plans in Environmental Impact Assessment and Strategic Environmental Impact Assessment. In addition, the carbon pool generated in this study is expected to be used as a basis for improving the accuracy of such analyses.

• Journal of Nutrition and Health
• /
• v.53 no.3
• /
• pp.329-345
• /
• 2020

Purpose: This study examined the status of food allergy management and importance-performance analysis (IPA) between elementary, and middle and high school employees in school foodservice. Methods: The participants were employees in elementary (n = 171) and middle and high schools (n = 187) in the Jeonbuk area. The demographic characteristics, the status of food allergy management, food allergy education, and the importance and performance status were assessed using a self-administered questionnaire. Results: Approximately 55.0% of employees in elementary and 32.6% in middle and high schools recognized that the foods in menu tables induced allergies. Approximately 93.0% of employees in elementary and 85.0% in middle and high school thought that food allergy management was an important part of school foodservice because of the possibility of health emergencies. Elimination and replacement meals were provided more in middle and high schools than in elementary schools. Food allergy education from nutrition teachers had been given to 62.6% of employees in elementary and 50.3% in middle and high schools. To prevent food allergy accidents, 72.4% of employees in elementary schools and 65.2% in middle and high schools wanted more accurate information on students with food allergies. As a result of IPA, elementary, middle, and high school employees were aware of the importance and performed well: 'Strict control of allergy-inducing foods because of cross-contamination'. On the other hand, they were not aware of the importance and performed them insufficiently: 'Know how to use epinephrine to prepare for emergencies'. Conclusion: Therefore, it is necessary to improve the consciousness of nutrition teachers for the effective application of food allergy education, especially the recognition of allergy-inducing foods and emergency responsive ability.

• Journal of radiological science and technology
• /
• v.30 no.1
• /
• pp.13-23
• /
• 2007

In recent years, mammography system is changed rapidly from conventional screen-film system to digital system for application to screening and diagnosis. Digital mammography system provides several advantages over screen-film mammography system. According to the information provided by the manufacturer, digital mammography system offers radiation dose reduction in comparison with screen-film mammography system, because of digital detector, particularly direct digital detector has higher x-ray absorption efficiency than screen-film combination or imaging plate(IP). We measured average glandular doses(AGD) in screen-film mammography(SFM) system with slow screen-film combination, computed mammography(CM) system, indirect digital mammography(IDM) system and direct digital mammography(DDM) system using brest tissue-equivalent phantom(glandularity 30%, 50% and 70%). The results were shown as follows : AGD values for DDM system were highest than those for other systems. Although automatic exposure control(AEC) mode was selected, the curve of the AGD values against thickness or glandularity increased significantly for the SFM system with the uniform target/filter(Mo/Mo) combination. Therefore, the AGD values for the high energy examinations were highest in the SFM system, and those for the low energy examinations were highest in the DDM system. But the curve of the AGD values against thickness and glandularity increased gently for CM system with the automatic selection of the target/filter combination (from Mo/Mo to Mo/Rh or from Mo/Rh to Rh/Rh), and the AGD values were lowest. Consequently, the parameters in mammography for each exposure besides detection efficiency play an important role in oder to estimate a patient radiation dose.