• 제목/요약/키워드: Control set

검색결과 5,255건 처리시간 0.04초

무화과(Ficus carica L.) 열매 추출물의 tyrosinase 및 MITF 발현 억제를 통한 미백 활성 (Whitening activity of Ficus carica L. fruits extract through inhibition of tyrosinase and MITF expression)

  • 김민지;박시은;이근수;김진화;권순우;황형서
    • Journal of Applied Biological Chemistry
    • /
    • 제66권
    • /
    • pp.204-212
    • /
    • 2023
  • 미백은 멜라닌 세포 내 멜라닌 생성 억제 기능을 의미한다. 기존 미백소재의 피부 부작용 때문에 최근에는 천연 소재를 활용한 미백 연구가 활발히 진행되고 있다. 무화과(Ficus Carica L.)는 뽕나무과에 속하는 열매로 줄기와 잎 성분의 미백 활성은 보고되었으나 무화과 열매의 미백 활성은 알려지지 않아 본 연구를 통해 멜라닌 생성 억제, 항산화 및 항염증 활성을 규명하고자 하였다. 무화과 열매 추출물(Figs fruits extract, FFE)의 라디칼 소거 활성은 DPPH/ABTS 분석에서 최대 농도에서 대조군 대비 34.52±1.98%/60.71±1.26% 수준으로 관찰되었다. CCK-8 assay를 통한 FFE의 세포독성은 약 10% 농도부터 관찰 되어 독성이 없는 최대 농도를 5%로 설정하여 모든 실험에 적용하였다. FFE는 inducible nitric oxide synthase, cyclooxygenase-2, interleukin-6 및 tumor necrosis factor-α 유전자 발현 억제와 함께 NO 생성을 농도 의존적으로 감소시켜 항염증 활성이 있음을 알 수 있었다. 또한 미백 기능 규명을 위해 α-MSH로 자극된 B16F10 세포에서 FFE를 농도별로 처리한 결과 세포 내 멜라닌 생성을 유의하게 하향 조절했을 뿐만 아니라 시험관 내에서 tyrosinase 활성이 억제되었다. 또한 FFE는 RT-PCR에서 α-MSH 처리군에 비해 Microphthalmia-associated transcription factor (MITF) mRNA 발현을 약 94.34% 감소시켰다. 마지막으로, FFE는 α-MSH로 자극된 B16F10 세포에서 MITF, cAMP response element-binding protein 및 tyrosinase 단백질 발현을 유의하게 감소시켰다. 이러한 결과를 통해 우리는 FFE가 tyrosinase 효소 활성을 직접적으로 억제할 수 있을 뿐만 아니라 α-MSH 신호 기전 내 MITF 유전자 발현 조절을 통해 멜라닌 생성을 억제할 수 있음을 확인하였다.

항공기(航空機) 사고조사제도(事故調査制度)에 관한 연구(硏究) (A Study on the System of Aircraft Investigation)

  • 김두환
    • 항공우주정책ㆍ법학회지
    • /
    • 제9권
    • /
    • pp.85-143
    • /
    • 1997
  • The main purpose of the investigation of an accident caused by aircraft is to be prevented the sudden and casual accidents caused by wilful misconduct and fault from pilots, air traffic controllers, hijack, trouble of engine and machinery of aircraft, turbulence during the bad weather, collision between birds and aircraft, near miss flight by aircrafts etc. It is not the purpose of this activity to apportion blame or liability for offender of aircraft accidents. Accidents to aircraft, especially those involving the general public and their property, are a matter of great concern to the aviation community. The system of international regulation exists to improve safety and minimize, as far as possible, the risk of accidents but when they do occur there is a web of systems and procedures to investigate and respond to them. I would like to trace the general line of regulation from an international source in the Chicago Convention of 1944. Article 26 of the Convention lays down the basic principle for the investigation of the aircraft accident. Where there has been an accident to an aircraft of a contracting state which occurs in the territory of another contracting state and which involves death or serious injury or indicates serious technical defect in the aircraft or air navigation facilities, the state in which the accident occurs must institute an inquiry into the circumstances of the accident. That inquiry will be in accordance, in so far as its law permits, with the procedure which may be recommended from time to time by the International Civil Aviation Organization ICAO). There are very general provisions but they state two essential principles: first, in certain circumstances there must be an investigation, and second, who is to be responsible for undertaking that investigation. The latter is an important point to establish otherwise there could be at least two states claiming jurisdiction on the inquiry. The Chicago Convention also provides that the state where the aircraft is registered is to be given the opportunity to appoint observers to be present at the inquiry and the state holding the inquiry must communicate the report and findings in the matter to that other state. It is worth noting that the Chicago Convention (Article 25) also makes provision for assisting aircraft in distress. Each contracting state undertakes to provide such measures of assistance to aircraft in distress in its territory as it may find practicable and to permit (subject to control by its own authorities) the owner of the aircraft or authorities of the state in which the aircraft is registered, to provide such measures of assistance as may be necessitated by circumstances. Significantly, the undertaking can only be given by contracting state but the duty to provide assistance is not limited to aircraft registered in another contracting state, but presumably any aircraft in distress in the territory of the contracting state. Finally, the Convention envisages further regulations (normally to be produced under the auspices of ICAO). In this case the Convention provides that each contracting state, when undertaking a search for missing aircraft, will collaborate in co-ordinated measures which may be recommended from time to time pursuant to the Convention. Since 1944 further international regulations relating to safety and investigation of accidents have been made, both pursuant to Chicago Convention and, in particular, through the vehicle of the ICAO which has, for example, set up an accident and reporting system. By requiring the reporting of certain accidents and incidents it is building up an information service for the benefit of member states. However, Chicago Convention provides that each contracting state undertakes collaborate in securing the highest practicable degree of uniformity in regulations, standards, procedures and organization in relation to aircraft, personnel, airways and auxiliary services in all matters in which such uniformity will facilitate and improve air navigation. To this end, ICAO is to adopt and amend from time to time, as may be necessary, international standards and recommended practices and procedures dealing with, among other things, aircraft in distress and investigation of accidents. Standards and Recommended Practices for Aircraft Accident Injuries were first adopted by the ICAO Council on 11 April 1951 pursuant to Article 37 of the Chicago Convention on International Civil Aviation and were designated as Annex 13 to the Convention. The Standards Recommended Practices were based on Recommendations of the Accident Investigation Division at its first Session in February 1946 which were further developed at the Second Session of the Division in February 1947. The 2nd Edition (1966), 3rd Edition, (1973), 4th Edition (1976), 5th Edition (1979), 6th Edition (1981), 7th Edition (1988), 8th Edition (1992) of the Annex 13 (Aircraft Accident and Incident Investigation) of the Chicago Convention was amended eight times by the ICAO Council since 1966. Annex 13 sets out in detail the international standards and recommended practices to be adopted by contracting states in dealing with a serious accident to an aircraft of a contracting state occurring in the territory of another contracting state, known as the state of occurrence. It provides, principally, that the state in which the aircraft is registered is to be given the opportunity to appoint an accredited representative to be present at the inquiry conducted by the state in which the serious aircraft accident occurs. Article 26 of the Chicago Convention does not indicate what the accredited representative is to do but Annex 13 amplifies his rights and duties. In particular, the accredited representative participates in the inquiry by visiting the scene of the accident, examining the wreckage, questioning witnesses, having full access to all relevant evidence, receiving copies of all pertinent documents and making submissions in respect of the various elements of the inquiry. The main shortcomings of the present system for aircraft accident investigation are that some contracting sates are not applying Annex 13 within its express terms, although they are contracting states. Further, and much more important in practice, there are many countries which apply the letter of Annex 13 in such a way as to sterilise its spirit. This appears to be due to a number of causes often found in combination. Firstly, the requirements of the local law and of the local procedures are interpreted and applied so as preclude a more efficient investigation under Annex 13 in favour of a legalistic and sterile interpretation of its terms. Sometimes this results from a distrust of the motives of persons and bodies wishing to participate or from commercial or related to matters of liability and bodies. These may be political, commercial or related to matters of liability and insurance. Secondly, there is said to be a conscious desire to conduct the investigation in some contracting states in such a way as to absolve from any possibility of blame the authorities or nationals, whether manufacturers, operators or air traffic controllers, of the country in which the inquiry is held. The EEC has also had an input into accidents and investigations. In particular, a directive was issued in December 1980 encouraging the uniformity of standards within the EEC by means of joint co-operation of accident investigation. The sharing of and assisting with technical facilities and information was considered an important means of achieving these goals. It has since been proposed that a European accident investigation committee should be set up by the EEC (Council Directive 80/1266 of 1 December 1980). After I would like to introduce the summary of the legislation examples and system for aircraft accidents investigation of the United States, the United Kingdom, Canada, Germany, The Netherlands, Sweden, Swiss, New Zealand and Japan, and I am going to mention the present system, regulations and aviation act for the aircraft accident investigation in Korea. Furthermore I would like to point out the shortcomings of the present system and regulations and aviation act for the aircraft accident investigation and then I will suggest my personal opinion on the new and dramatic innovation on the system for aircraft accident investigation in Korea. I propose that it is necessary and desirable for us to make a new legislation or to revise the existing aviation act in order to establish the standing and independent Committee of Aircraft Accident Investigation under the Korean Government.

  • PDF

농촌 지역의 중년이후 성인의 염분 민감도에 따른 짠 음식 섭취 관련 식행동 (Dietary Behavior Related to Salty Food Intake of Adults Living in a Rural Area according to Saline Sensitivity)

  • 김미경;한 장일;정영진
    • Journal of Nutrition and Health
    • /
    • 제44권6호
    • /
    • pp.537-550
    • /
    • 2011
  • 본 연구에서는 고혈압 유병율이 높고 소금이 다량 함유된 김치, 장아찌, 장류 위주의 식생활을 하는 농촌 성인의 고혈압 및 만성 퇴행성 질병의 유병율을 낮추는데 도움을 주는 기초자료를 마련하고자, 농촌의 중년기 이후 성인의 식습관 및 건강습관과 식염섭취 행동을 조사하고 이에 영향을 미치는 식행동 요인들을 조사하였다. 조사 대상은 충북 옥천군의 옥천읍과 8개면 성인 주민을 대상으로 비례추출에 의해 402가구를 선정하고 가구당 1인씩 총 402인을 유의 추출하였다. 1% 소금물에 대한 짠맛 민감도를 조사하여 민감군, 보통군, 둔감군의 세 군으로 분류하고 각 군의 식행동과 주변인의 영향과 지원을 분석하였다. 1) 본 연구 대상자는 남자 133명 (33.1%), 여자 269명 (66.9%), 총 402명으로 평균 연령은 $58.9{\pm}9.4$세로 남녀 모두 61~70세 (40.0%)가 가장 많았다. 2) 조사대상자의 평균 체질량 지수 (kg/$m^2$)는 남자 $23.6{\pm}3.5$, 여자 $24.6{\pm}3.3$로 여자가 남자에 비해 과체중의 경향이 컸다. 허리-엉덩이 둘레비 (WHR)도 남자 $0.90{\pm}0.12$, 여자 $0.92{\pm}0.49$로 여자가 높았고, 연령별로는 모두 50~64세 (남 $0.92{\pm}0.13$, 여 $0.98{\pm}0.74$)에서 가장 높았다가 65세 이상에서 감소하였다 (남 $0.89{\pm}0.09$, 여 $0.90{\pm}0.05$). 3) 평소 먹는 음식의 간에 대한 응답에서 보통으로 먹는다 38.1%, 짜지 않게 먹는다 35.1%, 짜게 먹는다 26.9%의 순서로 많았는데, 65세 이상의 최고령층에서 짜게 먹는다는 응답이 34.6%로 가장 많았다. 음식 간에 대해 자녀보다 더 짜게 먹는 다는 응답도 65세 이상의 최고령층에서 가장 높았다 (p < 0.01). 1% 소금물에 대해 50.3%는 짜다, 41%는 보통이다, 8.7%는 싱겁다고 응답하였다. 4) 식염섭취 관련 식습관 및 식행동 조사에서 짠맛 둔감군은 보통군이나 민감군에 비해 규칙적으로 식사하는 비율이 낮은데 반해, 과식비율, 10분 이내의 식사속도, 편식, 튀김선호 비율이 세 군 중 가장 높았다. 5) 식염섭취에 대한 견해 및 행동에서 짠맛 둔감군이 짠 음식을 습관적으로 가장 많이 섭취하였고, 짠 음식 섭취가 건강에 좋지 않다는 인식, 짜게 먹는 습관을 바꾸겠다는 의지나 실천도도 가장 낮았다. 6) 식염섭취 감소를 위한 지원이나 영향력이 가장 큰 사람은 배우자 등 가족보다 의료 및 영양 전문가들 (각각 58.4%, 56.8%)이었다. 7) 식염섭취에 대한 자아효능감 조사에서 식염 섭취 조절이 어렵다고 답한 경우는 매끼니 (46.3%), 배우자가 짠 음식을 좋아할 때 (45.2%), 외식 할 때 (36.3%)의 순으로 높았다. 특히 민감군은 매 끼니, 외식시, 배우자가 짠 음식을 좋아하는 경우 모두에서 식염조절 능력이 높은 편이었다. 8) 식품군별 섭취빈도에서 유의적인 차이를 나타낸 식품군은 채소류, 과일류, 매운 음식류로서, 민감군에서 채소류와 과일류의 섭취빈도가 높은 반면 둔감군은 매운 음식류에 대한 섭취빈도가 높았다. 농촌의 중년기 이후 성인의 식습관 및 건강습관과 식염섭취 행동을 조사한 결과, 짠 음식 섭취가 습관화된 행태를 보이며 식염 섭취와 인식정도에 비해 식염 저감을 위한 실천정도는 낮아 주민들이 손쉽게 실천할 수 있는 효과적인 저염섭취를 위한 식생활 실천방안의 제시가 요구된다. 또한 의료 및 영양전문가들을 통한 영양교육과 배우자 등 가족에 대한 교육이 강화되고 산업체에서의 저염식품 개발 등을 유도하여 염분섭취 감소를 위한 식생활 환경 구축과 실천 가능한 범국민적 저염식 영양교육 지원책이 정부차원에서 더 적극적으로 수립되어야겠다.

허혈성 심장 질환의 One-stop Evaluation Protocol: Myocardial Fusion PET Study (One-stop Evaluation Protocol of Ischemic Heart Disease: Myocardial Fusion PET Study)

  • 김경목;이병욱;이동욱;김정수;장영도;방찬석;백종훈;이인수
    • 핵의학기술
    • /
    • 제14권2호
    • /
    • pp.33-37
    • /
    • 2010
  • 관상동맥질환의 진단 및 평가에 있어서 myocardial perfusion SPECT검사와 FDG를 이용한 myocardial PET검사 그리고 PET/CT에 장착된 64-slice CT를 이용한 coronary CT angiography를 동시에 실행함으로 검사의 신뢰도와 편의성을 한층 더 높이고자 한다. 먼저 약물부하 myocardial perfusion SPECT검사를 먼저 시행한다. 환자의 피폭경감을 위해서 $^{99m}Tc$-MIBI 10 mCi 로 주사하며 myocardial PET검사를 위해서 지방식을 먹지 않고 ursodeoxcholic acid 100 mg을 생수와 함께 복용하게 하여 1시간 후에 SPECT 영상을 얻는다. 이어서 myocardial FDG PET검사를 시행한다. 혈중의 지방산 농도를 낮추고 심장의 FDG섭취율을 증가시키기 위해 혈중 포도당 농도치에 따라 insulin과 Acipimox를 함께 사용하는 독창적인 경구 당 부하법을 사용하였으며, 환자의 피폭 경감을 위해서 $^{18}F$-FDG 5 mCi를 주사하고 1시간 후에 10분간 gated 영상을 얻으며 필요시 delay 영상을 얻는다. PET검사가 끝남과 동시에 환자는 동일한 position을 하고 연속해서 coronary CTA를 시행한다. 이 검사에서 가장 중요한 것은 심박동수 조절과 환자의 호흡협조이다. 심박동수를 65회 이하로 낮추기 위해 beta blocker 50 mg~200 mg을 의사와 상의하여 복용케 하고 호흡법을 충분히 연습을 시키다. 검사 직전에 isosorbide dinitrate를 3~5회 분무하여 혈관벽의 긴장을 낮추고 혈관을 확장시켜서 coronary artery의 해부학적 형태를 더욱 잘 나타낼 수 있게 한다. 촬영 시 CT 조영제를 4.0~5.0 mL/sec의 압력으로 주입하며 촬영을 한다. Coronary CTA를 이용하면 coronary artery stenosis가 잘 보이며, 약물부하 myocardial perfusion SPECT로 coronary CTA에서 보인 stenosis와 perfusion저하의 상관관계를 검토(culprit vessel 확인)할 수 있으며, FDG PET으로 hibernating myocardium 또는 infarction site의 viability를 확인할 수 있다. 한 가지 검사로 lesion site와 severity 및 치료에 대한 반응 예측이 가능함으로 약물치료, PCI, CABG 등 치료방향을 설정할 수 있다. 또한 모든 검사 과정들이 연속적으로 동시에 이루어지기 때문에 짧은 시간(3시간) 내에 one-stop으로 검사를 종료할 수 있는 큰 장점을 가지게 된다. 그러므로 이 검사법은 ischemic heart disease의 one-stop evaluation에 있어서 유용한 protocol로 보여진다.

  • PDF

비소세포성 폐암 환자의 방사선 치료 시 제한 호흡 주기의 유용성 평가 (Evaluation of the Usefulness of Restricted Respiratory Period at the Time of Radiotherapy for Non-Small Cell Lung Cancer Patient)

  • 박소연;안종호;서정민;김영일;김진만;최병기;표홍렬;송기원
    • 대한방사선치료학회지
    • /
    • 제24권2호
    • /
    • pp.123-135
    • /
    • 2012
  • 목 적: 비소세포성 폐암 환자의 호흡 조절 방사선 치료 시 호흡에 의한 종양의 움직임을 최소화하는 것이 필수적이다. 이에 본 연구에서는 자유호흡 주기와 제한호흡 주기를 각각 적용한 치료 계획을 비교, 분석하여 제한 호흡 주기의 유용성을 평가하고자 한다. 대상 및 방법: 2011년 4월부터 12월까지 비소세포성 폐암 환자 9명(tumor n=10)을 대상으로 환자에게 평소의 호흡주기를 바탕으로 측정한 '자유호흡 주기'와 의도적으로 줄인 '제한호흡 주기'를 '신호모니터-호흡(guided-breathing)'법을 사용하여 각각 훈련을 실시한 후 RPM과 4차원 전산화 단층촬영 모의치료기를 이용해 치료계획용 4D CT를 실시하여 총 10개의 호흡 위상(respiration phase)별 CT 영상을 획득하였다. 각 호흡 주기의 CT 영상에 관측자 두 명이 각각 설정한 육안적 종양체적(Gross Tumor Volume, GTV)과 내부표적체적(Internal Target Volume, ITV)부피를 측정, 비교하였고 들숨(end-inspiration, EI)인 0%와 날숨(end-exhalation, EE)인 50% 위상에서의 center of mass (COM)를 측정하여 종양 움직임의 진폭을 측정했다. 또한 관측자 두명이 각각 두 호흡 주기를 적용한 치료계획을 수립하였고 정상 폐 평균선량(mean dose to normal lung, MDTNL)과 정상 폐 용적의 정상조직합병증확률(normal tissue complication probability, NTCP)을 비교, 분석하였으며 측정된 자료의 정량적 평가를 위해 통계 분석을 실시했다. 결 과: 관측자 두 명의 '제한호흡 주기'를 적용한 치료 계획을 분석한 결과 '자유호흡 주기'에 비해 종양의 3D 방향 움직임이 관측자 1의 경우 38.75%, 관측자 2의 경우 41.10%의 감소율을 보였고 GTV와 ITV의 부피를 측정, 비교한 결과 GTV의 부피는 관측자 1의 경우 $14.96{\pm}9.44%$, 관측자 2의 경우 $19.86{\pm}10.62%$, ITV의 부피는 관측자 1의 경우 $8.91{\pm}5.91%$, 관측자 2의 경우 $15.52{\pm}9.01%$의 감소율을 보였으며 MDTNL과 NTCP를 분석, 비교한 결과 MDTNL은 관측자 1의 경우 $3.98{\pm}5.62%$, 관측자 2의 경우 $7.62{\pm}10.29%$의 감소율을, NTCP의 경우 관측자 1의 결과 $21.70{\pm}28.27%$, 관측자 2의 결과 $37.83{\pm}49.93%$의 감소율을 나타냈다. 또한 두 관측자의 결과 값의 상관관계를 분석한 결과 '자유호흡 주기'에서는 관측자간의 유의한 차이를 보이는 데 비해 '제한호흡 주기'에서는 관측자간의 차이가 없는 감소율을 보였다. 결 론: '자유호흡 주기'에 비해 '제한호흡 주기'를 적용한 치료 계획에서 평가인자들의 상대적인 감소를 나타내어 비소세포성 폐암 환자의 호흡 조절 방사선 치료 시 '제한호흡 주기'의 유용성 및 타당성을 확인할 수 있었다.

  • PDF

경제력집중(經濟力集中) : 기본시각(基本視角)과 정책방향(政策方向) (The Concentration of Economic Power in Korea)

  • 이규억
    • KDI Journal of Economic Policy
    • /
    • 제12권1호
    • /
    • pp.31-68
    • /
    • 1990
  • 경제력집중(經濟力集中)은 경제적(經濟的) 자원(資源)과 수단(手段)의 상당부분이 소수의 경독주체(經瀆主體)에 집중되어 이들이 자원배분(資源配分)의 흐름에 큰 영향을 미칠 수 있는 상태를 말한다. 그러므로 경제력집중(經濟力集中)은 본질상 자유시장기구(自由市場機構)의 생리와는 부합하지 않지만 자본주의(資本主義)의 역사로 볼 때 그것이 바로 자유경쟁(自由競爭)의 소산이라는 측면도 있다는 점이 문제가 된다. 구미(歐美)와 일본(日本) 등에 있어서 자본주의체제(資本主義體制)의 진화궤적(進化軌跡)은 이 문제가 어떻게 전개되는가에 따라 결정되어 왔다. 우리나라에서의 경제역집중(經濟力集中)은 다수의 독(獨) 과점적(寡占的) 대기업(大企業)들이 소유관계(所有關係)로 결합되어 있는 기업집단(企業集團) 즉 소위 재벌(財閥)의 문제로 집약될 수 있다. 우리나라의 기업집단(企業集團)의 성장은 시장기구(市場機構)의 작동결과에 기인한 면도 있지만 고도경제성장기(高度經濟成長期)의 정부정책(政府政策)에 의하여 촉진된 것도 부인할 수 없다. 기업집단(企業集團)에 의한 경제력집중(經濟力集中)은 과거 우리나라의 정치(政治) 경제(經濟) 사회(社會)가 거쳐온 진화과정(進化過程)을 집약적으로 나타내는 것 이다. 그러므로 우리나라에서 민주주의(民主主義)와 자본주의(資本主義)의 이념(理念)과 질서(秩序)에 대한 국민적(國民的) 합의(合意)를 모색하려는 현시점에서 경제력집중(經濟力集中)을 객관적으로 인식하여 효율(效率)과 형평(衡平)을 조화하는 적절한 대응방향을 모색 하는 것은 매우 긴요한 과제이다.

  • PDF

충돌 정보와 m-bit인식을 이용한 적응형 RFID 충돌 방지 기법 (Adaptive RFID anti-collision scheme using collision information and m-bit identification)

  • 이제율;신종민;양동민
    • 인터넷정보학회논문지
    • /
    • 제14권5호
    • /
    • pp.1-10
    • /
    • 2013
  • RFID(Radio Frequency Identification)시스템은 하나의 RFDI리더, 다수의 RFID태그 장치들로 이루어진 비접촉방식의 근거리 무선 인식 기술이다. RFID태그는 자체적인 연산 수행이 가능한 능동형 태그와 이에 비해 성능은 떨어지지만 저렴한 가격으로 물류 유통에 적합한 수동형 태그로 나눌 수 있다. 데이터 처리 장치는 리더와 연결되어 리더가 전송받은 정보를 처리한다. RFID 시스템은 무선주파수를 이용해 다수의 태그를 빠른 시간에 인식할 수 있다. RFID시스템은 유통, 물류, 운송, 물품관리, 출입 통제, 금융 등 다양한 분야에서 응용되고 있다. 하지만 RFID시스템을 더욱 확산시키기 위해서는 가격, 크기, 전력소모, 보안 등 해결할 문제가 많다. 그 문제들 중에서 본 논문에서는 다수의 수동형 태그를 인식할 때 발생하는 충돌 문제를 해결하기 위한 알고리즘을 제안한다. RFID 시스템에서 다수의 태그를 인식하기 위한 충돌 방지 기법에는 확률적인 방식과 결정적인 방식 그리고 이를 혼합한 하이브리드 방식이 있다. 본 논문에서는 우선 기존에 있던 확률적 방식의 충돌방지기법인 알로하 기반 프로토콜과 결정적 방식의 충돌방지기법인 트리 기반 프로토콜에 대해 소개한다. 알로하 기반 프로토콜은 시간을 슬롯 단위로 나누고 태그들이 각자 임의로 슬롯을 선택하여 자신의 ID를 전송하는 방식이다. 하지만 알로하 기반 프로토콜은 태그가 슬롯을 선택하는 것이 확률적이기 때문에 모든 태그를 인식하는 것을 보장하지 못한다. 반면, 트리 기반의 프로토콜은 리더의 전송 범위 내에 있는 모든 태그를 인식하는 것을 보장한다. 트리 기반의 프로토콜은 리더가 태그에게 질의 하면 태그가 리더에게 응답하는 방식으로 태그를 인식한다. 리더가 질의 할 때, 두 개 이상의 태그가 응답 한다면 충돌이라고 한다. 충돌이 발생하면 리더는 새로운 질의를 만들어 태그에게 전송한다. 즉, 충돌이 자주 발생하면 새로운 질의를 자주 생성해야하기 때문에 속도가 저하된다. 그렇기 때문에 다수의 태그를 빠르게 인식하기 위해서는 충돌을 줄일 수 있는 효율적인 알고리즘이 필요하다. 모든 RFID태그는 96비트의 EPC(Electronic Product Code)의 태그ID를 가진다. 이렇게 제작된 다수의 태그들은 회사 또는 제조업체에 따라 동일한 프리픽스를 가진 유사한 태그ID를 가지게 된다. 이 경우 쿼리 트리 프로토콜을 이용하여 다수의 태그를 인식 하는 경우 충돌이 자주 일어나게 된다. 그 결과 질의-응답 수는 증가하고 유휴 노드가 발생하여 식별 효율 및 속도에 큰 영향을 미치게 된다. 이 문제를 해결하기 위해 충돌 트리 프로토콜과 M-ary 쿼리 트리 프로토콜이 제안되었다. 하지만 충돌 트리 프로토콜은 쿼리 트리 프로토콜과 마찬가지로 한번에 1비트씩 밖에 인식을 못한다는 단점이 있다. 그리고 유사한 태그ID들이 다수 존재할 경우, M-ary 쿼리 트리 프로토콜을 이용해 인식 하면, 불필요한 질의-응답이 증가한다. 본 논문에서는 이러한 문제를 해결하고자 M-ary 쿼리 트리 프로토콜의 매핑 함수를 이용한 m-비트 인식, 맨체스터 코딩을 이용한 태그 ID의 충돌정보, M-ary 쿼리 트리의 깊이를 하나 감소시킬 수 있는 예측 기법을 이용하여 성능을 향상시킨 적응형 M-ary 쿼리트리 프로토콜을 제안한다. 본 논문에서는 기존의 트리기반의 프로토콜과 제안하는 기법을 동일한 조건으로 실험하여 비교 분석 하였다. 그 결과 제안하는 기법은 식별시간, 식별효율 등에서 다른 기법들보다 성능이 우수하다.

디자인의 형태와 기능에 관한 연구 (Essay on Form and Function Design)

  • 이재국
    • 디자인학연구
    • /
    • 제2권1호
    • /
    • pp.63-97
    • /
    • 1989
  • There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.

  • PDF

APPLICATION OF FUZZY SET THEORY IN SAFEGUARDS

  • Fattah, A.;Nishiwaki, Y.
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.1051-1054
    • /
    • 1993
  • The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.

  • PDF

지식 공유의 파레토 비율 및 불평등 정도와 가상 지식 협업: 위키피디아 행위 데이터 분석 (Pareto Ratio and Inequality Level of Knowledge Sharing in Virtual Knowledge Collaboration: Analysis of Behaviors on Wikipedia)

  • 박현정;신경식
    • 지능정보연구
    • /
    • 제20권3호
    • /
    • pp.19-43
    • /
    • 2014
  • 전체 결과의 80%가 전체 원인의 20%에 의해 일어난다는 파레토 법칙(Pareto principle)은 상위 20%의 핵심 고객에 대한 우선적인 마케팅을 비롯하여 기업 경영의 많은 부분에서 적용되어 왔다. 파레토 법칙과는 대조적으로, 80%의 사소한 다수가 20%의 핵심적인 소수보다 우월한 가치를 창출한다는 롱테일 법칙(Long Tail theory)은 ICT(Information and Communication Technology)의 발전과 함께 새로운 경영 패러다임으로 주목 받아오고 있다. 본 연구의 목적은 경영 현장에서 양대 흐름을 형성해온 이러한 법칙들이 변화무쌍한 글로벌 가상화 환경에서 기업의 핵심적인 성공 요인이라고 할 수 있는 가상 지식 협업에는 어떻게 관련되는지를 규명하는 것이다. 이를 위해, 대표적인 가상 지식 협업 커뮤니티인 위키피디아에서 품질 최상위 등급인 피쳐드 아티클(Featured Article) 레벨로 승급된 2,978개의 아티클에 대한 협업 행위를 분석하였다. 즉, 각 아티클 그룹에서 편집 횟수 기준 상위 20%에 속하는 참여자들의 총 편집 횟수가 전체 편집 횟수에서 차지하는 비율인 파레토 비율(Pareto ratio)이 지식 협업 효율성과 어떤 관계를 가지고 있는지를 도출하였다. 그리고, 이러한 연구를 편집 참여를 통한 지식 공유에 대한 전체적인 불평등 정도를 나타내는 지니 계수(Gini coefficient)의 영향 및 그룹의 작업 특성을 반영하도록 확장하였다. 결과적으로, 지식 공유의 파레토 비율과 지니 계수가 증가하면 지식 협업 효율성도 높아지지만, 이러한 변수들이 일정 수준 이상으로 증가하면 오히려 지식 협업 효율성이 낮아지는 역 U자(inverted U-shaped) 관계가 있음을 확인하였다. 그리고, 이러한 관계는 인지적 노력을 상대적으로 더 많이 요구하는 학문적인 특성의 작업에서 더 민감하게 작용하는 것으로 보인다.