• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.105-114
• /
• 2023

In this paper, we propose a deployment and operation scheme of UxNB network toward mobile IAB. By operating a UxNB network based on SDN(Software Defined Network), UxNBs are deployed in areas where mobile communication services are desired. After deploying UxNB in the service area, IAB can be set up to perform mobile communication services. For this purpose, this paper first proposes a UxNB Network Controller consisting of a UAV Controller and an SDN Controller, and proposes the necessary functions. Next, we present a scenario in which a UxNB network can be deployed and operated in detail step by step. We also discuss the location of the UxNB network controller, how to deliver control commands from the UAV controller to the UxNB, how to apply IAB for UxNB networks, optimization of UxNB networks, RLF(radio link failure) recovery in UxNB networks, and future research on security in UxNB networks. It is expected that the proposed UxNB Network Controller architecture and UxNB network deployment and operation will enable seamless integration of UxNB networks into Mobile IAB.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.9
• /
• pp.169-177
• /
• 2024

Industrial Wireless Sensor Network (IWSN) is a key feature of Industrial IoT that enables industrial automation through process monitoring and control by connecting industrial equipment such as sensors, robots, and machines wirelessly, and must support the strict requirements of modern industrial environments such as real-time, reliability, and energy efficiency. To achieve these goals, IWSN uses reliable communication methods such as multipath routing, fixed redundant resource allocation, and non-contention-based scheduling. However, the issue of wasting redundant resources that are not utilized for communication degrades not only the efficiency of limited radio resources but also the energy efficiency. In this paper, we propose a scheme that utilizes reinforcement learning in communication scheduling to periodically identify unused wireless resources and reallocate them to save energy consumption of the entire industrial network. The experimental performance evaluation shows that the proposed approach achieves about 30% improvement of resource efficiency in scheduling compared to the existing method while supporting high reliability. In addition, the energy efficiency and latency are improbed by more than 21% and 38%, respectively, by reducing unnecessary communication.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.317-322
• /
• 2008

The Biochemical Oxygen Demand(BOD) is one of important parameters for the most widely used method of organic pollution in wastewater and wastewater treatment effluent. As the conventional BOD test needs 5-day long incubation period, it is thus incompatible with real time control of wastewater treatment plant. To resolve this problem, in the present study an on-line Dissolved Oxygen(DO) monitoring system was used to observe the transient change of dissolved oxygen concentration in livestock wastewater. The system was composed of BOD sensor, amplifier and computer. It was observed that the concentration of the microorganism in the livestock wastewater was relatively constant during the growth period of initial one hour, which allowed the assumption of the constant Oxygen Uptake Rate(OUR) within one hour of measurement. It was thus concluded that the present scheme provided a protocol for automatic measurement of BOD in livestock wastewater, which can be applicable to optimal control of livestock wastewater treatment plant.

• Radiation Oncology Journal
• /
• v.33 no.4
• /
• pp.284-293
• /
• 2015

Purpose: To determine failure patterns and survival outcomes of T4N0-1 non-small cell lung cancer (NSCLC) treated with definitive radiotherapy. Materials and Methods: Ninety-five patients with T4N0-1 NSCLC who received definitive radiotherapy with or without chemotherapy from May 2003 to October 2014 were retrospectively reviewed. The standard radiotherapy scheme was 66 Gy in 30 fractions. The main concurrent chemotherapy regimen was $50mg/m^2$ weekly paclitaxel combined with $20mg/m^2$ cisplatin or AUC 2 carboplatin. The primary outcome was overall survival (OS). Secondary outcomes were failure patterns and toxicities. Results: The median age was 64 years (range, 34 to 90 years). Eighty-eight percent of patients (n = 84) had an Eastern Cooperative Oncology Group performance status of 0-1, and 42% (n = 40) experienced pretreatment weight loss. Sixty percent of patients (n = 57) had no metastatic regional lymph nodes. The median radiation dose was EQD2 67.1 Gy (range, 56.9 to 83.3 Gy). Seventy-one patients (75%) were treated with concurrent chemotherapy; of these, 13 were also administered neoadjuvant chemotherapy. At a median follow-up of 21 months (range, 1 to 102 months), 3-year OS was 44%. The 3-year cumulative incidences of local recurrence and distant recurrence were 48.8% and 36.3%, respectively. Pretreatment weight loss and combined chemotherapy were significant factors for OS. Acute esophagitis over grade 3 occurred in three patients and grade 3 chronic esophagitis occurred in one patient. There was no grade 3-4 radiation pneumonitis. Conclusion: Definitive radiotherapy for T4N0-1 NSCLC results in favorable survival with acceptable toxicity rates. Local recurrence is the major recurrence pattern. Intensity modulated radiotherapy and radio-sensitizing agents would be needed to improve local tumor control.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.71-80
• /
• 1999

In this paper, a power MOSFET driver with protection circuits is designed using a 2${\mu}m$ high-voltage CMOS process. For stable operations of control circuits a power managing circuit is designed, and a voltage-detecting short-circuit protection(VDSCP) is proposed to protect a voltage regulator in the power control circuit. The proposed VDSCP scheme eliminates voltage drop caused by a series resistor, and turns off output current under short-circuit state. To protect a power MOSFET, a short-load protection, a gate-voltage limiter, and an over-voltage protection circuit are also designed A high voltage 2 ${\mu}m$ technology provides the breakdown voltage of 50 V. The driver consumes the power of 20 ~ 100 mW along its operation state excluding the power of the power MOSFET. The active area of the power MOSFET driver occupies $3.5 {\times}2..8mm^2$.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.60-67
• /
• 2001

Multicast Protocol for multimedia service on the Internet can be classified into two types, e.g., source based tree and shared tree according to difference of tree construction method. Shared tree based multicast is known to show outstanding results in the aspect of scalability than source based tree. Generally, There have been lots of researches on the method to satisfy QoS constraints through proper Rendezvous Point (RP) in the shared tree. In addition, as the multicast group members join and leave dynamically in the service time, RP of the shared tree should b be reselected for guranteeing Qos to new member, But, RP reselection method has not been considered generally as the solution to satisfy QoS C constraints. In this paper, new initial RP selection and RP reselection method are proposed, which utilize RTCP (Real Time Control Protocol) report packet fields. Proposed initial RP selection and RP reselection method use RTCP protocol which underlying multimedia application service So, the proposed method does not need any special process for collecting network information to calculate RP. New initial RP selection method s shows better performance than random and topology based one by 40-50% in simulation. Also, RP reselection method improves delay p performance by 50% after initial RP selection according to the member’s dynamicity.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.137-142
• /
• 2003

Construction CALS has been introduced with an aim to improve the effectiveness of construction management in the public sector. The objective of this paper is to provide an approach to implementing an integrated construction management environment. The environment described in this paper provides a methods for the owner and the contractor as well as designers and engineers to interact in a sing control scheme. This interaction represents the collaboration between the contractual parties for sharing construction information. XML technology has been applied as a basic technology for delivering data in the system. The XML-based forms are loaded on the system, whose data are stored in the central database right after review and approval. In future the integrated construction management environment can be further developed to the extend that the contractor's information system is directly interface with the owner's.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.209-216
• /
• 2005

This paper generally relates to the field of wireless local area networks(WLANs), and more particularly, to AP selection and association methods for the performance of a station. In these days, IEEE 802.11 Wireless LAN network is widely deployed and used as an emerging service to connect high-speed Internet in the public wireless environment. But, if there are many users in hot spot area, they suffer a severe decrease of performance. Thus it needs an association and access control mechanism especially when it is used in the public environment. In this paper, we suggest a selection and association method using Beacon or Probe Response frames based IEEE 802.11. Station selects AP using the information of the capacity area in a Beacon or a Probe Response frame. According to the present paper, an association method for a public WLAN service, which includes a WLAN user terminal and an AP for relaying WLAN communications to and from the user terminal, includes the steps of the user terminal asking the AP's states for access to a radio channel; and the station selects and associates with the AP According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.877-890
• /
• 1999

In this paper, a multimedia mail including video, sound, graphic data has been proposed as the next generation mail of the text based mail. In order to develop the multimedia mail, the most outstanding problem is the fact that the multimedia data are too huge to send them to the receiving end directly. The fact of big data may cause many problems in both transferring and storing the data of the multimedia mail. Our main idea is to separate between a control program for the multimedia presentation and multimedia data. Since the size of a control program is as small as a plain text mail, it has no problem to send it attached to the internet mail to the receiver directly. Instead, the big multimedia data themselves may remain on the sender's computer or be sent to a designated server so that the data may be transferred to the receiver only when the receiver activates the play of the multimedia mail. In this scheme, our research focus is paced on the buffer management and the thread scheduling for the real time play of the multimedia mail on internet. Another problem is to provide an easy way of editing a multimedia presentation for an ordinary people having no programming knowledge. For the purposed, VIP(Visual Interface Player) has been used and the results or multimedia mail implemented on LAN has been described.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3289-3293
• /
• 2014

Femtosecond laser ablation (fs LA) was used in this study to identify pollution by heavy metals and the distribution of elemental nutrients at different rice milling ratios. Polished rice (degrees of milling of 3, 5, 7, 9, and 11) was collected from major Korean supermarkets and one sample thereof was selected. An internal quality control experiment was conducted using a rice flour certified reference material from the Korea Research Institute of Standards and Science (KRISS CRM) for the evaluation of the efficacy. To assess the effectiveness of the analysis method, the reliability was validated using a food analysis performance assessment scheme (FAPAS), with chili powder serving as an external quality control. The results of the analysis of the inorganic elements Ti, Ca, Al, Fe and Mn in white and brown rice with degrees of milling of 3, 5, 7, 9 and 11 using ICP-MS, ICP-OES and AAS revealed contents of 0.40, 49.2, 2.43, 5.36 and 10.3 mg/kg in white rice and 0.59, 78.0, 7.52, 11.0 and 18.5 mg/kg in brown rice, respectively. Among the elements, there were remarkable differences in the measured contents. By comparing the contents of the elements at different degrees of milling, Ti, Co, As, Ca, Al, Cu, Fe, and Mn were determined to be distributed on the surface of the rice grains, whereas the contents of Cd and Pb increased toward the center of the rice grains, and Si was evenly distributed. After the quantitative analysis of rice samples polished to different degrees of milling, Ca and Al, which were contained in large amounts, and Si were analyzed with specificity by fs LA. The results show that Ca and Al were distributed in the rice husk (protective covering of rice) and Si was distributed in all parts of the rice.