• 전기학회논문지
• /
• 제62권1호
• /
• pp.70-75
• /
• 2013

The electrical separation joint as a filter circuit distributes the track circuit frequency. The electrical separation joint is classified into the interval where reinforcing bars are insulated and not insulated through the length of track circuit. In case of incorrectly setting up the length of electrical separation joint, the amplitude of current on the track circuit is not over standard current which is the standard of current on the track circuit and it effects on the close frequency on track circuit. Then, it makes an accident or makes a train not receive information for train control. In this paper, the electrical separation joint model is suggested and parameters are numerically calculated in the model. Moreover, the length of electrical separation joint is analyzed and is demonstrated by uisng Matlab and PSpice program.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.787-796
• /
• 2012

The purpose of this study is to investigate CSOs(combined sewer overflows) control in the combined sewer with/without separation wall. There is the high correlation between sewage velocity and suspended solid(SS) loading in the sewer without it. The SS/BOD ratio was about 3 times in the area with it, while it was about 5 times in the area without it. Therefore, the accumulated deposit within the sewer has influenced high SS loading in the sewer without it. This study showed that the separation wall installed acquired an acceptable efficiency in controlling the accumulated deposit in the combined sewer. According to this study, the BOD control effect was about 38 % in the sewer with the separation wall, whereas it showed about 24 % in the sewer without it. In this case, it was anticipated that the high pollutant control effect would be expected if the separation wall was installed in the combined sewer.

• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.1001-1006
• /
• 2013

Projection-based stereolithography is divided into constrained-surface and free-surface type according to controlling liquid layer. The constrained-surface type has a uniform layer thickness due to the use of a projection window, which covers the pattern generator such as liquid crystal display. However, the adhered resin on the projection window causes trouble and requires great separation force when the cured layer is separated from the window. To minimize the separation force, we developed a system to measure the separation force. The influence of material covering the pattern generator and the resin temperature is investigated in the system. Several structures according to the resin temperature and the velocity of z-axis elevation are compared. As a result, the fabrication condition to minimize the separation force reduces the process time.

• 제어로봇시스템학회논문지
• /
• 제9권2호
• /
• pp.99-106
• /
• 2003

A new reconfigurable model following flight control method based on direct adaptive scheme is presented. Using the timescale separation principle, both the inner-loop and the outer-loop states are controlled simultaneously. For the timescale separation assumption to be satisfied, the inner-loop model dynamics is set to be fast whereas the outer-loop model dynamics is set to be relatively slow. The stability and convergence of the proposed control law is proved by Lyapunov theorem. One of the merits of the proposed reconfigurable controller is that the FDI process and the persistent input excitation are not necessary, which is suitable for the flight control system. To evaluate the reconfiguration performance of the proposed control method, numerical simulation is performed using six degree-of-freedom nonlinear dynamics.

• Environmental Engineering Research
• /
• 제18권2호
• /
• pp.71-75
• /
• 2013

This study is to evaluate the effects of the separation wall on the sediment quality and quantity in a combined sewer, by surveying the sewer overflow and sediments during a rainfall. Since the separation wall installed in the combined sewer separates the rainfall and the sewage, the flow rate of the sewage is increased, and the amount of the sediment deposited on the sewer is decreased. One sampling point was the outfall of Daesacheon with a separation wall, and the other was the outfall of Gwaryecheon without a separation wall, in Daejeon metropolitan city. The maximum control of the biochemical oxygen demand (BOD) overflow load was more than 38% in the Daesacheon point with the separation wall, during a rainfall of 0.11 mm/hr. The maximum control of the BOD overflow load was 24% in Gwaryecheon without a separation wall, during a rainfall of 1.0 mm/hr. According to the survey results of the sediment in the sewer, the discharged sediment deposited on the sewer in Gwaryecheon point was about 23% to 28% of the total suspended solid during the rainfall. In addition, the average velocity of sewage in the presence of sediment was about 0.30 m/s, and if the separation wall is installed, it was expected to be about 1.01 m/s, that is 3.4 times more than the same conditions, resulting in the reduction of the sediment deposit.

• 멤브레인
• /
• 제22권2호
• /
• pp.77-94
• /
• 2012

내열성, 용매 저항성의 특징을 갖는 다공성 세라믹 소재를 이용한 무기 멤브레인이 기체분리(수소 분리, 이산화탄소 분리 등), 액체 분리(수처리, 폐수처리, 유기용매 분리 등) 등 여러 가지 분야로 그 응용이 확대되고 있다. 본 논문에서는 다공성 세라믹 멤브레인의 소재, 제조 방법에 따른 멤브레인의 구조 제어 및 성능 평가에 관한 연구를 소개하고, 멤브레인의 세공 크기에 따른 구조, 멤브레인의 특성을 이용한 여러 가지 기체 분리 및 액체 분리에 관한 연구 동향을 정리하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 추계 총회 및 학술발표회
• /
• pp.12-17
• /
• 1996

The structure formation by liquid-liquid(L-L) phase separation coupled with crystallization in isotactic polypropylene(i-PP). solutioos was investigated by a temperature jump experiment. A series of dialkyl phthalates with a different number of carbon atoms in the alkyl chain was used to control the interaction between polymer and solvent. Various thermal quench conditions were applied to the i-PP solutions to control systematically L-L phase separation and crystallization. A slow crystallizatina elongates the liquid droplets in the radial direction of a spherulite. A rapid crystallization under the deep quench locks-in the growth of L-L phase separation. These results indicate that the extent of L-L phase separation which exists below melting point can be successfully controlled through the proper selection of solvent and thermal conditions.

• International Journal of Control, Automation, and Systems
• /
• 제2권2호
• /
• pp.135-143
• /
• 2004

Recently, high throughput screening for microorganisms with desired characteristics from a large heterogeneous population has become possible. Single cell separation has taken on increasing significance in recent years, and several different methods have been proposed so far. In this paper, we introduce several cell manipulation methods aiming at single cell separation and investigation. At first, methods for the separation of microorganisms are classified. Then, we introduce two different approaches, that is, (1) indirect manipulation using laser trapped microtools and (2) thermal gelation.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.80-83
• /
• 2003

In this note, a separation principle of the Takagi-Sugeno (T-S) fuzzy-model-based controller/observer is investigated. The separation principle of T-S fuzzy-model-based controller/observer sharing the premise parts in the fuzzy rule with directly measurable premise variables is well established. In that case, the fact that the augmented observer-based control system has the eigenvalues of the sub-closed-loop control system by the state-feedback controller and the sub-closed-loop observer error system is used to prove the separation principle. This paper studies the separation principle of T-S fuzzy-model-based controller/observer in which the premise variables cannot be directly measurable.

• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.747-754
• /
• 2022

유체진동기에서 분출되는 초음속 진동제트를 이용하여 충격파에 의한 경계층 박리유동을 제어하는 실험적 연구가 이루어졌다. 유체진동기의 위치와 제어압력의 변화가 경사충격파에 의하여 발생되는 경계층 박리유동의 특성에 미치는 영향이 관찰되었고, 이를 위하여 고속 슐리렌, 표면유동가시화, 벽압력 측정, 그리고 정밀 피토관 측정 기법이 적용되었다. 본 연구의 초음속 진동제트의 박리유동 제어 특성은 공기제트 와류를 이용한 기존 제어기법과 정량적으로 비교 분석되었다.