• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1039-1043
• /
• 2005

Despite the many significant advances made in robot architecture, the basic approaches are deliberative and reactive methods. They are quite different in recognizing outer environment and inner operating mechanism. For this reason, they have almost opposite characteristics. Later, researchers integrate these two approaches into hybrid architecture. In such architecture, Reactive module also called low-level motion control module have advantage in real-time reacting and sensing outer environment; Deliberative module also called high-level task planning module is good at planning task using world knowledge, reasoning and intelligent computing. This paper presents a framework of the integrated planning and control for mobile robot navigation. Unlike the existing hybrid architecture, it learns topological map from the world map by using MST (Minimum Spanning Tree)-based SOFM (Self-Organizing Feature Map) algorithm. High-level planning module plans simple tasks to low-level control module and low-level control module feedbacks the environment information to high-level planning module. This method allows for a tight integration between high-level and low-level modules, which provide real-time performance and strong adaptability and reactivity to outer environment and its unforeseen changes. This proposed framework is verified by simulation.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.92-98
• /
• 1995

In the cluster tool, it is necessary to precisely control the vacuum pressure for the wafer transportation between transport module and cassette or process modules with the range of 1*10$^{-4}$ to 5*10$^{-5}$ torr. So we have designed the pressure control system for the transport module of the cluster tool and have evaluated its performance. Digital PID is utilized with the weighted sum of both three previous errors and one current error. The feedback signal is put into the nitrogen mass flow controller using the transport module controller. This pressure control system can prevent the transport module from the particle generation and backstreaming of hazardous process gases of the process chamber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1063-1065
• /
• 1996

As PLC has become central to today's FA environment, the importance of developing and providing special-module of PLC such as Analog-module, PID-module, Temperature Control-module has increased. In this paper introduces the Temperature Control-module which is developed by LGIS R&D lab. and presents the availability of PLC-control system with Temperature Control-module.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.693-699
• /
• 1999

In this paper author develops digital governor for medium speed diesel engine. The system is composed of MPU main control module RPM measuring module PWM driving module driver module for F.O. rack drive motor key pad and display module. Experiment results of speed control on 6cyl 1800pm 250kw Daewoo MAN diesel erigine were satisfied for design speci-fications and system could be developed for commercial usage after taking more experiments and endurance tests under various environments.

• 한국지능시스템학회논문지
• /
• 제17권1호
• /
• pp.52-57
• /
• 2007

본 논문은 실시간 음성인식명령으로 구동되는 지능형 이동기제어시스템을 제안한다. 제안된 이동기제어시스템은 메인모듈, 음성인식모듈, 모터구동모듈, 센서모듈로 구성된다. 80C196KC로 구현된 메인모듈에서 퍼지논리가 적용된 지능형 제어시스템을 제안한다. 사용자의 몸무게 및 여러 가지 주변 환경요인들에 의한 비선형성을 개선하기 위해서 피드백제어가 가능한 모터구동모듈과 센서모듈이 구현된다. 또한 제안된 시스템에서 이동로봇의 제어를 위한 9개의 단어를 사용하여 동작을 테스트하였고, 제어입력으로 음성명령과 조이스틱 사용 시 이동로봇의 성능을 평가하였다.

• Smart Structures and Systems
• /
• 제18권4호
• /
• pp.663-682
• /
• 2016

Continuum manipulators as a kind of mechanical arms are useful tools in special robotic applications. In medical applications, like colonoscopy, a maneuverable thin and flexible manipulator is required. This research is focused on developing a basic module for such an application using shape memory alloys (SMA). In the structure of the module three wires of SMA are uniformly distributed and attached to the circumference of a flexible tube. By activating wires, individually or together, different rotation regimes are provided. SMA model is used based on Brinson work. The SMA model is combined to model of flexible tube to provide a composite model of the module. Simulating the model in Matlab provided a platform to be used to develop controller. Complex and nonlinear behavior of SMA make the control problem hard especially when a few SMA actuators are active simultaneously. In this paper, position control of the two degree of freedom module is under focus. An experimental control strategy is developed to regulate a desired position in the module. The simulation results present a reasonable performance of the controller. Moreover, the results are verified through experiments and show that the continuum module of this paper would be used in real modular manipulators.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.367-371
• /
• 2004

This paper describes development of automatic flight control system for an unmanned target drone which is operated by Korean army as for anti-air gun shooting training. Current target drone is operated by pilot control of on-board servo motor via remote control system. Automatic flight control system for the target drone greatly reduces work load of ground pilot and can increase application area of the drone. Most UAVs being operated now days use high-priced sensors as AHRS and IMU to measure the attitude, but those are costly. This paper introduces the development of low-cost automatic flight control system with low-cost sensors. The integrated automatic flight control system has been developed by integrating combining power module, switching module, monitoring module and RC receiver as an one module. The performance of automatic flight control system is verified by flight test.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1520-1525
• /
• 2009

본 연구는 철강 회사의 기존 크레인의 위치 제어 시스템을 USN(Ubiquitous Sensor Network)과 GPS(Global Positioning System) 시스템으로 대체하기 위한 시뮬레이션을 수행한 것이다. 크레인의 위치 제어 시스템을 지상국과 차상국의 통제 시스템으로 구분하였으며, 하드웨어 시스템은 GPS위성으로부터 크레인의 위치 제어 데이터를 수신하는 GPS 수신기 모듈, 지상국과 차상국 간 통신을 하기 위한 블루투스 통신 모듈, 크레인의 위치를 정밀하게 제어하는 초음파 센서 모듈, 크레인의 롤러를 대체한 모터, GPS 수신기 모듈과 블루투스 통신 모듈, 초음파 센서 모듈을 제어하는 임베디드 MCU (ATmega1/28L) 등으로 구성하였으며, 소프트웨어 시스템은 GPS 위성으로부터 GPS 수신기 모듈에 수신된 데이터 중 GGA 출력 문장을 필터링하기 위한 프로그램, 초음파 센서 구동프로그램, 크레인의 위치를 실시간으로 모니터링 할 수 있는 디지털 지도 프로그램 등으로 구성하였다. 제안한 시스템은 위치제어를 1cm 간격으로 정확하게 조절이 가능함을 실험을 통해 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.711-713
• /
• 2004

In the past time, the protection relay did only a protection function. Currently, its upgraded device i.e. IED(Intelligent Electric Device) has been designed to protect, control, and monitor the whole power system automatically. Also the device is desired to successfully measure important elements of the power system. This paper considers design method of a digital protection IED with a function of measuring various elements and a communication function. The protection IED is composed of the specific function modules that are signal process module, communication module, input/output module and main control module. A signal process module use a DSP processor for analysis of input signal. Main control module use a embedded processor, Xscale, that has an ARM Core. The communication protocol uses IEC61850 protocol that becomes standard in the future. The protection IED is able to process mass information with high-performance processor. As each function module is designed individually, the reliability of the device can be enhanced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.269-272
• /
• 2004

The target of this paper is the development of Web-based monitoring & control system which is for effective and economic management of mold manufacturing process. This system has three module; G-code Control, Monitoring Module and Result analysis module. Also, as the environment of development is based on internet, this system which is possible to the remote site management of manufacturing process works on Web. To be possible to control the manufacturing monitoring by client, each module is made ActiveX control and is based on socket communication. This system makes the foundation which is possible to manage the mold manufacturing process efficiently from remote site by matching real-time monitoring with manufacturing process in factory using G-code control and displaying the result of manufacturing using Ch-CGI.