• 전기학회논문지
• /
• 제60권5호
• /
• pp.1023-1029
• /
• 2011

In the industrial vision systems, image correction has great influence on the overall performance of measurement or inspection. The overall area of distorted image is usually splitted into small control areas, and each area is corrected by its control points. The performance of correction methods using control points can be improved by reduction of control areas because the computational time and memory highly depend on the number of control areas. We develop a merging algorithm that reduces control areas and preserves the correction accuracy. The algorithm merges the splitted control areas by use of quad tree method. Experimental results are presented to verify the usefulness of the proposed method.

• 한국항해항만학회지
• /
• 제34권4호
• /
• pp.265-270
• /
• 2010

The national VTS was launched in 1993, and has adopted a harbour-oriented control method which is unable to consider enough characteristics of its work. However, for the past 17 years, the characteristics has changed due to increased amount of vessels. Up to now the domestic Vessel Traffic Service has adopted harbour-oriented control method which is unable to consider enough characteristics of its work. However, developed countries have carried out waters-oriented control method, according to the using areas of ships, to be well considered the characteristics of control for increasing efficiency of it. Especially, VTS of Daesan, Pyeongtaek and Inchon harbour can have confusions of control because of overlapped service areas of it. Therefore, in this paper suggested a new Sector Division that the relevants waters is divided into 3 operational Regions and these are divided into nine sectors again, for the purpose of improving the efficiency and the concentration of VTS.

• 생태와환경
• /
• 제49권4호
• /
• pp.271-278
• /
• 2016

Forest clear-cutting operations influence biodiversity through habitat changes and food resource availability for inhabitant species. This study examined the effects of clear-cutting on forest arthropod communities. Arthropods were collected from two different forest treatment areas (clear-cut and control) in summer and autumn. In each treatment area, arthropods were sampled from both crown and ground surfaces using sweeping and pitfall trap methods, respectively. Then, the taxonomic order of the collected arthropod specimens was easily identified. Results indicate that arthropod abundance and number of taxa present were higher at ground surface than at crown levels in both clear-cut and control areas. At crown level, more homopteran species were present in clear-cut areas than in control areas in summer. At ground surface, populations of Isopoda and Opiliones were higher in control areas than in clear-cut areas, whereas numbers of Araneae, Orthoptera, and Hymenoptera were greater in clear-cut areas. Cluster analysis and principal component analysis showed distinct differences between clear-cut and control communities at crown level in summer and at ground surface in autumn. Thus, our results indicate that clear-cutting significantly influences arthropod communities, and higher taxa are valuable for conducting rapid biological assessments of ecosystem disturbances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.455-456
• /
• 2007

Maintaining the voltages is important in the power systems and the voltage is closely associated with the reactive powers. Therefore, the voltages are maintained by controlling the reactive powers. However actually it is impossible to control reactive power for maintaining all bus voltages. Thus, Secondary Voltage Regulation was designed. It divides power systems into some control areas and controls pilot node with the included generators. The reactive powers of generators can control pilot bus voltage continuously and fast. Therefore we need to divide areas and select control generators for SVR with Electrical distance. Then estimation of the reactive power reserves of geneators is needed in voltage control areas to control voltages of the pilot nodes.

• 방사성폐기물학회지
• /
• 제19권4호
• /
• pp.479-489
• /
• 2021

The Republic of Korea is expected to participate in the denuclearization verification activities by the International Atomic Energy Agency (IAEA) in case any neighboring countries declared denuclearization. In this study, samples for the verification of nuclear activities in undeclared areas were selected for the denuclearization of neighboring countries, and the appropriateness of the procedures was considered. If a country with nuclear weapons declares denuclearization, it must be accompanied by the IAEA's verification regarding nuclear materials and weapons in the declared and undeclared areas. The analysis of the process samples or on-site environmental samples and the verification of undeclared nuclear facilities and materials aid in uncovering any evidence of concealment of nuclear activity in undeclared areas. Therefore, a methodology was established for effective sampling and analysis in accordance with proper procedures. Preparations for sampling in undeclared areas were undertaken for various potential scenarios, such as, the establishment of zones according to radiation dose, methods of supplying electricity, wireless communication networks, targets of sampling according to characteristics of nuclides, manned sampling method, and unmanned sampling method. Through this, procedures were established for pre- and post-site settings in preparation for hazards and limiting factors at nuclear inspection sites.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권6호
• /
• pp.2727-2732
• /
• 2014

Objectives: The aim of this study was to describe and analyze the incidence and mortality of female breast cancer in Jiangsu Province of China. Methods: Incidence and mortality data for female breast cancer and corresponding population statistics from eligible cancer registries in Jiangsu from 2006 to 2010 were collected and analyzed. Crude rates, age-specific rates and age-standardized rates of incidence and mortality were calculated, and annual present changes (APCs) were estimated to describe the time trends. Results: From 2006 to 2010, 11,013 new cases and 3,068 deaths of female breast cancer were identified in selected cancer registry areas of Jiangsu. The annual average crude incidence and age-standardized incidence by world population (ASW) were 25.2/ and 17.9/100,000 respectively. The annual average crude and ASW for mortality rates were 7.03/ and 4.81/100,000. The incidence was higher in urban areas than that in rural areas, and this was consistent in all age groups. No significant difference was observed in mortality between urban and rural areas. Two peaks were observed when looking at age-specific rates, one at 50-59 years and another at over 85 years. During the 5 years, incidence and mortality increased with APCs of 4.47% and 6.89%, respectively. Compared to the national level, Jiangsu is an area with relatively low risk of female breast cancer. Conclusion: Breast cancer has become a main public health problem among Chinese females. More prevention and control activities should be conducted to reduce the burden of this disease, even in relatively low risk areas like Jiangsu.

• 한국환경복원기술학회지
• /
• 제13권2호
• /
• pp.105-113
• /
• 2010

To investigate the restoration procedure on soil physical properties at the surface of visiting road affected by rest-year system. This study was carried out at visiting roads of stream of Chilsun in Jirisan. Mean soil strength in 20cm of soil depth was lower in the Rest-Year System areas (1.5-1.9 times in Site 2, 1.1-7.5 times in Site 3) than in the control (Site 1). Soil strength was recovered by the Rest-Year System in the national park. Mesopore rate (pF 2.7) in 0-15 cm of soil depth was higher in the Rest-Year System areas (1.2 times) than in the control. This indicates that mesopore rate is rapidly restoring in the Rest-Year System areas. Pore space rate in 0-7.5 cm of soil depth was higher in the Rest-Year System areas (23.2% in Site 2, 23.6% in Site 3) than in the control (22.4% in Site 1). Pore space rate in 7.5-15 cm of soil depth was also higher in the Rest-Year System areas (22.9% in Site 2 and Site 3) than in the control (18.9% in Site 1). Soil pore space was remediable by the Rest-Year System. Bulk density in 0-7.5 cm of soil depth was lower in the Rest-Year System areas (1.674g/$cm^3$ in Site 2, 1.668g/$cm^3$ in Site 3) than in the control (1.723g/$cm^3$ in Site 1). Bulk density in 7.5-15 cm of soil depth was lower in the Rest-Year System areas (1.785g/$cm^3$ in Site 2 and 1.721g/$cm^3$ in Site 3) than in the control (1.721g/$cm^3$ in Site 1). Soil bulk density was decreased in the Rest-Year System areas of the national park. Amount of soil erosion was lower in the Rest-Year System areas ($0.017m^3$/km/yr in site 2, $0.023m^3$/km/yr in site 3) than in the control ($0.054m^3$/km/yr in site 1).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.350-353
• /
• 1994

This paper presents a method to calculate the characteristic root areas and loci band of control systems with uncertainties. First, equations of boundary curves of root areas in the case of additive and multiplicative perturbation are derived. Then, an algorithm for the calculation of the array of closed curves is presented. When the upper bound of the absolute values of frequency responses for the uncertain part, is also frequency-dependent, the frequency-dependent, terms are included in the characteristic equation of the nominal system. This lead to the boundary equations of the root, areas for control systems with frequency-dependent uncertainty. Numerical examples of the control systems with multiplicative perturbations including frequency-dependent terms are presented to verify this calculation method. Finally, its applications to the design of robust control systems, e.g., passive adaptive control systems are also discussed.

• 환경영향평가
• /
• 제13권5호
• /
• pp.263-276
• /
• 2004

This research is primarily intended to propose a new concept for aggregate control of impervious coverage using remote sensing and GIS. An empirical study for a case study site was conducted to demonstrate how a standard remote sensing and GIS technology can be used to assist in implementing the aggregate control for impervious coverage as intermediary between decision makers and scientists. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in the aggregate control; the meaningful definition of land mosaic in terms of pervious areas, classification of pervious intensity, change detection for pervious areas. Detailed visual maps (e.g. estimation of impervious surface allowable) can be generated over large areas quickly and easily to increase the scientific and objective decision-making for the aggregate control. It is anticipated that this research output could be used as a valuable reference to confirm the potential of remote sensing and GIS in the aggregate control for impervious coverage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.18-18
• /
• 1996

This paper reviews some of the most prominent and promising areas of chemical process control both in relations to batch and continuous processes. These areas include the modeling, optimization, control and monitoring of chemical processes and entire plants. Most of these areas explicitly utilize a model of the process. For this purpose the types of models used are examined in some detail. These types of models are categorized in knowledge-driven and datadriven classes. In the areas of modeling and optimization, attention is paid to batch reactors using the Tendency Modeling approach. These Tendency models consist of data- and knowledge-driven components and are often called Gray or Hybrid models. In the case of continuous processes, emphasis is placed in the closed-loop identification of a state space model and their use in Model Predictive Control nonlinear processes, such as the Fluidized Catalytic Cracking process. The effective monitoring of multivariate process is examined through the use of statistical charts obtained by the use of Principal Component Analysis (PMC). Static and dynamic charts account for the cross and auto-correlation of the substantial number of variables measured on-line. Centralized and de-centralized chart also aim in isolating the source of process disturbances so that they can be eliminated. Even though significant progress has been made during the last decade, the challenges for the next ten years are substantial. Present progress is strongly influenced by the economical benefits industry is deriving from the use of these advanced techniques. Future progress will be further catalyzed from the harmonious collaboration of University and Industrial researchers.