• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.932-935
• /
• 2004

In this paper, we present a framework that is easy to develop, modify, maintain and extend a control and monitoring software for any kinds of instruments. The presented framework is composed of three XML documents (IID, MAP, and CMIML) and two tools (Virtual Instrument Wizard, Generator). Interface information about behaviors and states of instruments is written on IID. Mapping information between the interface information in IID and API of a real instrument driver is written on MAP. Finally information about control and monitoring software is written on CMIML. IID, MAP and CMIML are written with XML format to provide common usage and platform independence of the suggested framework. VI Wizard generates CMIML (platform independent intermediate document) using IID and existing CMIML, and Generator generates source code of a control and monitoring software (platform dependent code) automatically using CMIML and MAP. The suggested framework that automatically generates control and monitoring software based on GUI provides easy development and maintenance. Also, reusability can be increased by reusing platform independent software description documents.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.11
• /
• pp.1074-1081
• /
• 2011

As robotics systems are becoming more complex there is the need to promote component based robot development, where systems can be constructed as the composition and integration of reusable building block. One of the most important challenges facing component based robot development is safeguarding against software component failures and malfunctions. The health monitoring of the robot software is most fundamental factors not only to manage system at runtime but also to analysis information of software component in design phase of the robot application. And also as a lot of monitoring events are occurred during the execution of the robot software components, a simple data treatment and efficient memory management method is required. In this paper, we propose an efficient events monitoring and data management method by modeling robot software component and monitoring factors based on robot software framework. The monitoring factors, such as component execution runtime exception, Input/Output data, execution time, checkpoint-rollback are deduced and the detail monitoring events are defined. Furthermore, we define event record and monitor record pool suitable for robot software components and propose a efficient data management method. To verify the effectiveness and usefulness of the proposed approach, a monitoring module and user interface has been implemented using OPRoS robot software framework. The proposed monitoring module can be used as monitoring tool to analysis the software components in robot design phase and plugged into self-healing system to monitor the system health status at runtime in robot systems.

• International Journal of Quality Innovation
• /
• v.1 no.1
• /
• pp.97-105
• /
• 2000

In this paper, a two-section method for measuring is introduced and the variation sources of measurement process are analysed. Measuring is a special process in general process. Various variation source must be firstly decomposed so that the statistical distribution law of measuring process can be established, and then implement monitoring control of the measuring process. A special method to obtain the measuring variation is discussed, and a monitoring control technique for measuring process is studied based statistical distribution. Towards the end, we briefly introduce software design for the analysis and control of a measurement process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.811-817
• /
• 2004

Recently embedded systems are widely used in various industrial fields as supervisory controller because they have many merits. One of merits seems to be that operating environment of embedded system is the same as development environment using PC. That makes developing and manufacturing period shorten and also proper time to market Most of all machinery have sequential control system for their maneuvering which is composed of relays. contacts. timers. etc. In this paper. software sequential control system is proposed to be able to replace hardware sequential control system by using embedded system A lot of merits by the software sequential control system can be expected in the respect of economic reproduction, intelligent technologies and utilities, And porting of LINUX operating system to embedded system is carried out and device drivers and interface boards for LINUX 05 are designed for controlling air compressor by software Internet remote control and monitoring system of air compressor is implemented with Java script and CGI for these purposes. The experiment for operating air compressor system is taken through internet networks. The results show that developed system can be used for real plant.

• Journal of Biomedical Engineering Research
• /
• v.44 no.2
• /
• pp.99-108
• /
• 2023

According to the COVID-19, development of various medical software based on IoT(Internet of Things) was accelerated. Especially, interest in a central software system that can remotely monitor and control ventilators is increasing to solve problems related to the continuous increase in severe COVID-19 patients. Since medical device software is closely related to human life, this study aims to develop central monitoring system that can remotely monitor and control multiple ventilators in compliance with medical device software development standards and to verify performance of system. In addition, to ensure the safety and reliability of this central monitoring system, this study also specifies risk management requirements that can identify hazardous situations and evaluate potential hazards and confirms the implementation of cybersecurity to protect against potential cyber threats, which can have serious consequences for patient safety. As a result, we obtained medical device software manufacturing certificates from MFDS(Ministry of Food and Drug Safety) through technical documents about performance verification, risk management and cybersecurity application.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.916-918
• /
• 1996

We have an urgent matter that is lack of energy resource. So we have to accomplish the design of economical energy utility systems and to develop energy facilities with high efficiency. Cogeneration system is one of them. It has high efficiency and can solve unbalanced electricity and heat demand in Summer & Winter concurrently. Recently, to increase the efficiency and stability of the total system, it is applying automatic control and monitoring software to the hardware facilities in industrial control systems. Therefore, these systems has been researched and developed in the advanced countries. It also has been researched and developed in the domestic since '60. But the control and monitoring software in cogeneration system has been hardly developed and has been imported expensive products from the advanced countries. In this study, we have developed the software of operating control, status monitoring, operating data managing and tele-controlling. We have confirmed usefullness of developed software by applying to gas turbine cogeneration system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.1
• /
• pp.43-55
• /
• 2006

In this paper, we present a framework which is used to develop, modify, maintain and extend a control and monitoring software easily for any kind of automatic instruments. The proposed framework is composed of three XML documents (IID, MAP, CMIML) and two tools (Virtual Instrument Wizard, Generator). Interface information of behaviors and states of instrument is written on IID. Mapping information between the interface information in IID and API of a real instrument driver is written on MAP Final information of the control and monitoring software is written on CMIML, IID, MAP and CMIML are written by XML format to provide a common usage and platform independence of the proposed framework. Vl Wizard generates CMIML intermediate platform independent document using IID and existing CMIML, and Generator generates the source code of a control and monitoring software platform dependent code automatically using CMIML and MAP. The suggested framework provides an easy development and maintenance because it automatically generates a control and monitoring software in GUI environment and it also provides common usage and platform independence in virtue of using description document of XML format. Also, reusability can be increased by reusing platform independent software description document and not reusing platform dependent software code.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.124.2-124
• /
• 2001

The research for development of remote monitoring and control systems composed three stages of research categories. At the first stage, we decided the suitable instrumentation devices for interface between H/W systems and waste water treatment facility. And at the second stage, we developed the software package for remote monitoring and data transmission system including data receipt system via wired telephone line. At the final stage we developed local control system for auto-process control of waste water treatment facilities. For the first stage of research we developed the a drawing of design the instrumentation and selected optimal sensors or monitoring basic important data. After the first stage research we developed the software package with Graphic User Interface(GUI) ...