• 한국콘텐츠학회논문지
• /
• 제13권11호
• /
• pp.768-777
• /
• 2013

이 연구는 CT(computed tomography)검사 중 발생하는 방사선 누설선량(radiation leakage)으로부터 종사자 및 일반인의 피폭을 최소화하기 위한 것이다. 부산, 경남에 위치한 대학병원 7곳과 종합전문요양병원 4곳의 CT실을 대상으로 하였다. 누설선량 측정 장소로는 1) 조정실 내 감시창 벽면의 지면으로부터 3m 높이 2) 조정실 내 특정 지점 3) 조정실 내 종사자 출입문 4) 환자 출입문을 선정하였다. 그 결과 M병원의 종사자 출입문에서 가장 높은 누설선량이 나타났다. 각각의 측정값은 고전적 방법에 의한 주당 최대 누설선량으로 환산하였다. 그 결과 1) $5.97{\pm}0.23$, 2) $0.50{\pm}0.02$, 3) $10.00{\pm}0.11$, 4) $2.37{\pm}0.47$ mR/week로 주당 최대 누설선량 허용치(<100 mR/week)이하였다. 하지만 측정 최대 누설선량을 기록한 M병원의 조정실 내 종사자 출입문을 실험적 방법으로 계산한 결과 $118.31{\pm}17.72$ mR/week(>100 mR/week)로 나타났다. 조정실 지면으로부터 3 m 이상의 높이에서의 누설선량은 조정실내부에 영향을 끼쳤다(p<0.05). 따라서, 누설선량의 피해를 줄이기 위해, 주당 최대 누설선량 산출 방법에 대한 개선과, 조정실 차폐벽의 차폐체를 3 m 이상으로 할 것을 제안 한다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.136-147
• /
• 1998

An experimental facility consisting of two 3$\times$4.4$\times$2.8m rooms identical in construction is built. Each room has a control system and storage tank supplying hot water to the radiant floor heating system. The facility enables simultaneous comparison of two different control strategies each implemented in a separate room. The operating performance of three kinds of flow control scheme is tested and compared in this study: (ⅰ) conventional on-off control based on feedback from room air temperature (ⅱ) TPSC(two parameter switching control )(ⅲ) TPOC(two parameter on-off control). Results show that TPSC and TPOC using room air and surface temperature sequentially as feedback signal to control hot water supply is the better temperature regulation scheme than conventional control based on feedback from only room air temperature. They are good candidates for the room with radiant floor heating system under continuous and intermittent heating mode.

• 한국융합학회논문지
• /
• 제8권1호
• /
• pp.51-59
• /
• 2017

본 연구는 종합병원 내 응급실에 설치된 CT 장비와 일반촬영장비에 대한 세균 오염도 검사를 실시하여 보건학적 융복합 감염관리에 대한 기초자료를 마련하고자 하였다. 연구는 2015년 12월 1일부터 12월 31일까지 수도권 3곳과 전라도 2곳, 충청도 2곳 등 총 7곳의 의료기관을 대상으로하였다. 영상의학과 응급실 내 CT장비의 검출된 표면 오염 균주는 Micrococcus species(4,5%), Stenotrophomonas maltophilia(9%), Enteococcus faecium(4.5%), Providencia stuartii(4.5), Gram negative bacilli(4.5%), 일반촬영장비에서 검출된 표면 오염 균주는 Providencia stuartii(11%), Klebsiella pneumonia(3.5%), Stenotrophomonas maltophilia(11%), Pantoea species(11%), Acinetobacter baumannii(3.5%), Micrococcus species(3.5%), Escherichia coli(3.5%), Enterobacter species(3.5%), Gram negative bacilli(11%) 로 병원 감염의 원인균으로 알려진 균주는 없었고, 특이성을 가진 균주 역시 없었지만 가장 많이 검출된 구역이 모두 환자와 밀접한 관련을 갖는 곳이므로 방사선사는 검사 전후 알코올 등으로 깨끗이 닦아내야 할 것이다.

• 한국수산과학회지
• /
• 제9권3호
• /
• pp.215-221
• /
• 1976

1976년 6월 10일부터 동년 8월 30일까지 본학 해양과학 연구소 하층 실험실에서 실험하였고 1975년 6월 7일에서 동년 8월 11일까지 약 2개월 동안에 풍양호, 척양호, 관악산호 등의 선박소음을 녹음한 테프로서 재생방음한 것을 음원으로 이용하였다. 이때 소음제어의 효과를 찾기 위해 A,B,C,D형의 실험용 직육면체인 방음실을 제작하여 실험실내에 배치하고 기관실소음과 발진기에 스피커를 연결해서 방음된 음압이 각방음제어실에 투과되는 음압 100분률과 또 각 방음제어실내에서 같은 조건으로 방음되는 경우에 자재와 형상이 다른 방음실내부 구조물에 따른 흡음효과를 조사 비교한 결과를 요약하면 다음과 같다. 1. 소음투과율은 실험실 외부음압이 60dB 일때 A형은 $69.7\%$였고 계속 10dB 증가함에 따라 $3.3\%$씩 증가하였고 D형에서는 $53.9\%$인 것이 10dB 증가함에 따라 $4.5\%$씩 증가했다. 2. 실험실인 외부음압이 100dB일 때 A,B,C,D형의 음압투과율은 81.6, 78.9, 75.3, $71.0\%$의 순으로 D형의 투과율이 낮아서 방음실로서는 D형이 가장 좋았다. 3. 대화에 지장이 없는 소음압은 75dB 이하이므로 A,B형을 제외하고 C,D형은 선박소음 제어실로서 유효했다. 4. 방음제어실내부 구조에 따른 흡음효과를 A,D형에서 비교하면 A형은 발진음일 때 거리 20cm에서 82dB로 가장 높고 80cm에서 76dB로 가장 낮았으며 100cm에서 77dB였고 140cm에서 78dB 정도 다시 증가해 반사음 현상이 일어났다. D형은 발진음일 때 거리 20cm에서 A와 같이 82dB였는데 80cm에서 72.5dB, 100cm에서 73dB, 140cm서에는 67dB로 A보다 12dB가 낮았다. 선박소음도 거리 20cm에서 A형은 77.5dB, D형은 77dB였는데 140cm에서는 A형이 74dB, D형이 63dB로 11dB의 차이로 D형이 낮아 역시 흡음효과가 A형 보다 D형이 좋았고 완벽한 무향실로서 반사음의 영향은 찾아 볼 수 없었다. 5. 매우 낮은 발진음일 때 흡음관계를 1000Hz를 기준삼아 보면 거리 20cm에서 C형은 44.7dB, D형은 45.4dB로 C형이 0.3dB로 악간 낮았으나 140cm에서 C,D형 모두가 44.3dB로서 같았다. 값싼 자재로서도 C형이 가장 흡음효과가 좋았다.

• 한국간호교육학회지
• /
• 제21권1호
• /
• pp.95-107
• /
• 2015

Purpose: The purpose of this study was to develop a tailored simulation learning (SL) program and to evaluate the effects of the program on the clinical competency, clinical decision-making competency, and communicative competency of new nursing staffs in intensive care units (ICU) and emergency rooms (ER). Methods: In this quasi-experimental study, fifteen nurses were assigned to the experimental group and fifteen to the control group. The experimental group was given the SL program of four sessions, whereas the lectures of four sessions were given to the control group. Data were analyzed using a $x^2$-test, Mann-Whitney U test, and Kruskal-Wallis test with an SPSS program. Analysis of covariance was used to treat the covariate of pre communicative competency between the experimental and control groups. Results: Based on the education needs of new nursing staffs in ICUs and ERs, three learning scenarios and one evaluating scenario were developed for the SL program. The score for clinical competency, clinical decision-making competency, and communicative competency were significantly higher in the experimental group compared with the control group. Conclusion: The SL program is an effective learning strategy for new nursing staffs in ICUs and ERs. These findings suggest that an SL program be offered as an alternative for new nurse orientation and continuing nurse education.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.297-305
• /
• 2012

In recent large-scale semiconductor manufacturing clean rooms, the energy consumption of outdoor air conditioning systems to heat, humidify, cool and dehumidify incoming outdoor air represents about 45% of the total air conditioning load required to maintain a clean room environment. Therefore, the energy performance evaluation and analysis of outdoor air conditioning systems is useful for reducing the outdoor air conditioning load for a clean room. In the present study, an experiment was conducted to compare the energy consumption of outdoor air conditioning systems with a simple air washer, an exhaust air heat recovery type air washer and a DCC return water heat recovery type air washer. It was shown from the present lab-scale experiment with an outdoor air flow of 1,000 $m^3/h$ that the exhaust air heat recovery type and DCC return water heat recovery type air washer outdoor air conditioning systems were more energy-efficient for the summer and winter operations than the simple air washer outdoor air conditioning system and furthermore, the DCC return water heat recovery type one was the most energy-efficient in the winter operation.

• 설비공학논문집
• /
• 제13권8호
• /
• pp.682-691
• /
• 2001

Most of radiant floor heating systems are operated in the intermittent heating mode in Korea. The application possibility of predictive suboptimal control for Koran residential house was investigated by computer simulation and experiment. For this study, TRNSYS program was used and an experimental facility consisting of tow rooms ($3\times4.4\times2.8 m$) identical in construction was built. The facility enabled simultaneous comparison of two different control method. And real multi residential hose was investigated. Results showed that outdoor air temperature prediction control was superior to the conventional control for radiant floor heating system operated in the intermittent heating mode. New control system resulted in good thermal environment and les energy consumption.

• 설비공학논문집
• /
• 제13권9호
• /
• pp.836-844
• /
• 2001

For the radiant floor heating system, the possibility of suboptimal prediction control was investigated by computer simulation and experiment. For this study, TRANSYS program was used and an experimental facility consisting of two rooms (3$\times$4.4$\times$2.8m) was built. The facility enabled simultaneous comparison of two different control strategies which implemented in a separate room. Results showed that outdoor air temperature prediction control was superior to the conventional outdoor air temperature compensation control for radiant floor heating system. However, more research for fine prediction of outside air temperature was required in the future.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.167-175
• /
• 2007

A predictive pulse control strategy as a means of improving the energy efficiency of radiant floor heating systems is explored. Experiments at the apartment with floor heating system are conducted to assess and compare the energy performance of the predictive pulse control strategy with an existing conventional control strategy. The Results showed that new suggested PPCM( Predictive Pulse Control Method) was available to decrease the gap of $1{\sim}1.5^{\circ}C$ between maximum and minimum indoor temperature of each rooms. Therefore PPCM method was favor to radiant floor heating system which have a delay time of 10-20 minutes for heat transfer by floor layers.

• 대한안전경영과학회지
• /
• 제11권3호
• /
• pp.87-94
• /
• 2009

Today's driver information system often features a rotary control type as a main controller for menu navigation. Population stereotype should be clearly understood in designing those systems to minimize the misunderstanding by the operator. This paper investigates stereotypes for rotary controlled menu interfaces and influences of contributing principles. A human factors experiment was conducted using various configurations of control-display layouts, cursor shapes/positions, and movement directions. The results showed that the control should be on the left of the display, with a rightward icon on the right side of the cursor, in order to match the stereotype. Regression analysis indicated that Warrick's principle was the most influential principle, followed by Icon shape, Icon position, Clockwise away, and Clockwise up principles. This study provides valuable information to designers of menu-based systems such as driver information systems and main control rooms that uses rotary controls.