• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.344-348
• /
• 2015

The image data of the web camera is used to identify the construction status of the site in a remote office and it can be used for safety management. This study develops a construction schedule simulation system based on the active nD object linked with real image data of web camera from the construction site. The progress control method by 4D object uses a method that the progress of each activity is represented with different colors by progress status. Since this method is still based on a virtual reality object, it is less realistic description for practical engineers. Therefore, in order to take advantage of BIM more realistic, the real image of actual construction status and 4D object of planned schedule in a data date should be compared in a screen simultaneously. Those methodologies and developed system are verified in a case project where a web camera is installed for the verification of the system.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.123-129
• /
• 2002

This paper proposes a vehicle trajectory prediction method far application to vehicle-to-vehicle distance control. This method is based on 2-dimensional kinematics and a Kalman filter has been used to estimate acceleration of the object vehicle. The simulation results using the proposed control method show that the relative distance characteristics can be improved via the trajectory prediction method compared to the customary intelligent cruise control algorithm.

• 동력기계공학회지
• /
• 제7권1호
• /
• pp.68-73
• /
• 2003

The purpose of this study is to develop a new proportional pressure reducing valve and to verify the validity of a new mechanism with pressure control pin. The dynamic characteristics of the object pressure reducing valve was studied by numerical analysis of the mathematical model. Also, static and dynamic characteristics of the new pressure control valve were tested with a testing system based on the test standard.

• 한국지능시스템학회논문지
• /
• 제2권1호
• /
• pp.33-52
• /
• 1992

In this paper, Controlled Knowledge Base(CKB) type fuzzy learning controller for force/servo control system was proposed and the application for them was also studied. To achieve them, we derive fuzzy set from expert knowledges and reson the appropriate control gains by parameter estimation of object. Then, we proved it by computer simulation that we can reduce the ambigious effect, which is not able to be estimated, by designing the controller based on CKB.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1080-1087
• /
• 2009

This paper presents an algorithm to acquire 3D geometric information using a virtual plane method. The method to measure 3D information on the plane is easy, because it's not concerning value on the z-axis. A plane can be made by arbitrary three points in the 3D space, so the algorithm is able to make a number of virtual planes from feature points on the target object. In this case, these geometric relations between the origin of each virtual plane and the origin of the target object coordinates should be expressed as known homogeneous matrices. To include this idea, the algorithm could induce simple matrix formula which is only concerning unknown geometric relation between the origin of target object and the origin of camera coordinates. Therefore, it's more fast and simple than other methods. For achieving the proposed method, a regular pin-hole camera model and a perspective projection matrix which is defined by a geometric relation between each coordinate system is used. In the final part of this paper, we demonstrate the techniques for a variety of applications, including measurements in industrial parts and known patches images.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.180-193
• /
• 2020

In this study, the end-effector tracking performance of a manipulator installed on a remotely operated vehicle (ROV) for autonomous underwater intervention is verified. The underwater manipulator is an ARM 7E MINI model produced by the ECA group, which consists of six joints and one gripper. Of the six joints of the manipulator, two are revolute joints and the other four are prismatic joints. Velocity control is used to control the manipulator with forward and inverse kinematics. When the manipulator approaches a target object, it is difficult for the ROV to maintain its position and posture, owing to various disturbances, such as the variation in both the center of mass and the reaction force resulting from the manipulator motion. Therefore, it is necessary to compensate for the influences and ensure the relative distance to the object. Simulations and experiments are performed to track the trajectory of a virtual object, and the tracking performance is verified from the results.

• 한국항행학회논문지
• /
• 제13권2호
• /
• pp.165-171
• /
• 2009

HLA는 상호운용성과 재사용성을 목적으로 미국 국방성 산하 기관인 DMSO에서 개발되어진 분산 시스템 프레임워크이고 RTI는 HLA의 하부 구조로서 메시지 교환과 개체 관리 등의 통신 과정 중에 필요한 서비스를 제공한다. 그러나 HLA 기반 시뮬레이션은 규모가 커지거나 복잡해지면 통신 부하가 발생하여서 성능이 저하되는 문제점을 갖고 있다. 이러한 단점을 해결하기 위해 데이터 교환할 때, RTI와 TCP 소켓을 부분적으로 사용한 OMM으로 지속적인 송수신에 대한 통신 부하를 경감할 수 있는 방법을 만들었다. 이 방법을 교통관제 시뮬레이션 시스템에 적용했을 때, 유용함을 시뮬레이션을 통해 증명하였다.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.905-910
• /
• 2008

본 논문은 운동 물체에 대한 시뮬레이션 할 수 있는 원판형 모션테이블 제작과 제어 실험 시스템을 제시하였다. 원판형 모션테이블은 3개의 길이가 변하는 축과 중심점을 유지하는 축으로 이루어져 있으며, 원판의 자세 변화에 따른 중심점은 중심축 상에 항상 놓이도록 설계 되어 있다. 제어 시스템은 원판형 모션테이블의 서보모터 3개를 제어함으로써 원판의 자세를 바꿀 수 있도록 설계 되었다. 또한 본 원판형 모션테이블을 이용한 비행제어 시물레이션을 예로 제시하였다. 이러한 소형 모션테이블의 보급과 이를 이용한 실험 교육은 우리나라의 항공우주, 로봇분야의 인력양성에 기여할 것이다.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1028-1036
• /
• 2004

Ultrasonic sensors are widely used in mobile robot applications to recognize external environments by virtue that they are cheap, easy to use, and robust under varying lighting conditions. In most cases, a single ultrasonic sensor is used to measure the distance to an object based on time-of-flight (TOF) information, whereas multiple sensors are used to recognize the shape of an object, such as a comer, plane, or edge. However, the conventional sequential driving technique involves a long measurement time. This problem can be resolved by pulse coding of ultrasonic signals, which allows multi-sensors to be emitted simultaneously and adjacent objects to be distinguished. Accordingly, this paper presents a new simultaneous coded driving system for an ultrasonic sensor array for object recognition in autonomous mobile robots. The proposed system is designed and implemented. A micro-controller unit is implemented using a DSP, Polaroid 6500 ranging modules are modified for firing the coded signals, and a 5-channel coded signal generating board is made using a FPGA. To verify the proposed method, experiments were conducted in an environment with overlapping signals, and the flight distances fur each sensor were obtained from the received overlapping signals using correlations and conversion to a bipolar PCM-NRZ signal.

• 한국지능시스템학회논문지
• /
• 제10권5호
• /
• pp.459-465
• /
• 2000

본 논문에서는 CCD 카메라에서 나오는 NTSC 신호를 분석하여 근거리에서 초점을 맞출 수 있도록 렌즈의 동작을 제어하는 방법을 제안한다. 카메라와 물체의 거리가 약 1미터 이하로 가까워지면 자동 초점 기능을 갖춘 카메라는 영상의 전체적인 초점보다는 가장 근접한 미세 부분을 기준으로 초점을 맞추어서 영상을 획득한다. 이러한 문제를 해결하기 위해, 어닐링 알고리즘을 이용하여 CCD 카메라 렌즈에 내장된 모터를 영상의 전체적인 신호에 따라 제어하여 근거리에서 처리대상에 가장 적합한 영상을 획득하는 방법을 제안한다. 이러한 CCD 카메라 초점 제어 기술은 눈의 홍채를 이용한 인식 시스템에서 사용될 목적으로 개발되었다.