• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2008

A fuzzy inference logic system is proposed for gas turbine engine fault isolation. The gas path measurements used for fault isolation are exhaust gas temperature, low and high rotor speed, and fuel flow. The fuzzy inference logic uses rules developed from a model of performance influence coefficients to isolate engine faults while accounting for uncertainty in gas path measurements. Inputs to the fuzzy inference logic system are measurement deviations of gas path parameters which are transferred directly from the ECM(Engine Control Monitoring) program and outputs are engine module faults. The proposed fuzzy inference logic system is tested using simulated data developed from the ECM trend plot reports and the results show that the proposed fuzzy inference logic system isolates module faults with high accuracy rate in the environment of high level of uncertainty.

• Journal of Power Electronics
• /
• v.12 no.2
• /
• pp.305-316
• /
• 2012

The paper presents an accurate loss model based controller of an induction motor to calculate the optimal air gap flux. The model includes copper losses, iron losses, harmonic losses, friction and windage losses, and stray losses. These losses are represented as a function of the air gap flux. By using the calculated optimal air gap flux compared with rated flux for speed sensorless indirect vector controlled induction motor, an improvement in motor efficiency is achieved. The motor speed performance is improved using a fuzzy logic speed controller instead of a PI controller. The fuzzy logic speed controller was simulated using the fuzzy control interface block of MATLAB/SIMULINK program. The control algorithm is experimentally tested within a PC under RTAI-Linux. The simulation and experimental results show the improvement in motor efficiency and speed performance.

• Korean Management Science Review
• /
• v.17 no.2
• /
• pp.97-113
• /
• 2000

The introduction of client server systems raises some serious IS control concerns. Although client server systems increase system flexibility and compatibility, and facilitates system downsizing and process restructuring, multiple operating systems, database management systems, and platforms of client-server system increase th potential exposures and risks of the system. It is needed to recommend the effective control framework to mitigate risks. This paper suggests risks and control framework for client server system. The results of two case studies indicate that program and database management are important as program and data should be located and maintained in client and servers. It becomes difficult to manage divided programs and data logic that are distributed across clients and servers that have different platforms. The case studies of two banks show that the extent of distribution of program and data logic affects the importance of program and database management controls.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.116-124
• /
• 2012

In this paper, we propose an efficient lighting control system design for AVR based LSDM control. This paper, an efficient lighting control system design for LSDM control be design divided as the signal control part for I/O data bus and the timer/counter part for clock signal control according to operating conditions. LSDM control logic be optimization to PORTx and DDRx register by specifying the logical value of each bit for effective control signal processing. And, the LSDM control signal by lighting control program execution of ATmega128 be designed to be LSDM lighting control by control logic operating. In this paper, a proposed lighting control system were measured to power loss rate to proved the power loss reduction about lighting status of LSDM control logic by download the lighting control program to system through serial from host PC. As a measurement result, a proposed lighting control system than the existing lighting control system were proved to be effective to the overall power consumption reduction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.59-66
• /
• 2000

As the highly complex and precise control functions are required in modern industrial process control system, the complex function models and developed in each hardware and software of PLC. The SFC graphical language is very powerful for describing the sequential logic control algorithm, on the other hand it graphical language is very powerful for describing the sequential logic control algorithm, on the other hand it has problems in describing the interlock logic control algorithm, such as error management algorithm. In this paper, we propose the efficient error management method using the action qualifiers to design the error management algorithm in industrial process control system described scheme, we realize the error management logic in process control system of film coating machine.From the experiment results, we confirm that the proposed scheme is very useful in aspects to realize easily th error management logic and to reduce the memory capacity for user's program.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.171-176
• /
• 2001

This paper describes the methodology of an IEC 1131-3-based control logic generator for the control system design and converting algorithm between programmable languages. The proposed control logic generator is generated based on the software model and common element with data type, variables, POUs(program organization unit) and execution control unit commonly used within programmable languages of IEC 1131-3 Standard. The generation method of object file was proposed on five programmable language based on IECI 131-3. The generation method of object file is represented as following; 1) the generation method using conversion algorithm from LD to IL with FBD(function block diagram), 2) the generation method using C code generation algorithm from SFC using the SFC execution sequence with FBD and ST(structured text). The proposed control logic generator was implemented by Visual C++ and MFC on MS-windows NT 4.0

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.8
• /
• pp.763-770
• /
• 2000

In tunnel ventilation, the Purpose of ventilation control is to keep the required pollution level with minimum consumption of energy But tunnel ventilation has large disturbances caused by discharge of pollutants, traffic forces especially strong for longitudinal ventilation. Hence in this paper, the tunnel ventilation control logic applying fuzzy control theories is proposed and the simulation program of tunnel ventilation control is developed. The characteristics of longitudinal ventilation with jet fans are estimated and the effect of the proposed tunnel ventilation control is verified by the simulation program.

• IE interfaces
• /
• v.21 no.3
• /
• pp.294-301
• /
• 2008

Agile and flexible manufacturing systems make it mandatory that a control program should have features such as agility, flexibility, and reusability in order to run manufacturing unit smoothly. PLCs are the most frequently used control program in manufacturing systems. PLC programs are mostly programmed by subcontraction, which makes correction of code very difficult. As a result, it may cause delay during down time and ramp up time which leads to big loss of revenue and goodwill. To prevent delay during the times, this paper proposes systematic process analysis and application method for programmable logic controller like LLD (Ladder Logic Diagram). The proposed method uses modified human-error investing techniques for documentation and transforming technique to program LLD from the documentation. Furthermore, this paper demonstrates an example of piston mechanism to explain the proposed method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.298-305
• /
• 2015

This paper provides experimental results of an excitation control system of the synchronous generator on board ships in accordance with rules of classification society to make sure its performance. The experiment compares and reviews control results between PID control and fuzzy logic control applied to change of loads of the generator in order to make sure to satisfy the rules of classification society. Both of them are written by Labview program. In case of PID Control, this paper firstly adjusts the gains by ultimate sensitive method and the gains is more tuned by engineer's experience. And the fuzzy logic controller uses Mamdani method to make membership function for error between reference voltage and measuring voltage, differential error rate and output voltage. This paper is to make sure the experimental results of the proposed excitation control system applied to actual small synchronous generator with PID control and fuzzy logic written by using Labview program and it is proved on stability and improvement through experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.709-711
• /
• 2016

An automatic control system to control a machinery system is managed by the PLC(Program Logic Control) and measured a machinery status from the sensor information to improve productivity in the industry field. This paper to propose a diagnostic monitoring system consists of a relay module, a one-chip processor module and a computer monitoring system. To improve productive capacity, the system is to check an auxiliary relay's trouble by a real-time monitoring.