• Title/Summary/Keyword: Control Board

Search Result 1,762, Processing Time 0.03 seconds

A Study on Power Conversion System for Fuel Cell Controlled by Micro-Processor (마이크로프로세서에 의해 제어되는 연료전지용 전력변환장치에 관한 연구)

  • Kim, Ju-Yong;Jung, Sang-Hwa;Mun, Sang-Pil;Ryu, Jae-Yup;Suh, Ki-Young
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.21 no.5
    • /
    • pp.10-24
    • /
    • 2007
  • In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V]. In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch $S_5\;and\;S_6$ in the secondary switch which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household

A study on the hybrid communication system to remove the communication shadow area for controller system of navigational aids (전파 음영지역 해소를 위한 항로표지관리용 하이브리드 통신 시스템에 관한 연구)

  • Jeon, Joong Sung
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.37 no.4
    • /
    • pp.409-417
    • /
    • 2013
  • Mu-communication board supported by multi-communication is designed with Atxmega 128A1 which is a low power energy consuming of 8-bit microcontroller. ATxmega128A1 microcontroller consists of 8 UART(Universal asynchronous receiver/transmitter) ports which can be setting appropriate user interface having command line interpreter(CLI) program with each port, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. 8 URAT ports are used for the multi communication modem, GPS module, etc. and EEPROM is used for saving a configuration for program running, and flash memory of 128 kbytes is used for storing a Firm Ware, and 8 kbytes SRAM is used for stack, storing memory of global variables while program running. If we uses the hybrid communication of path optimization of VHF, TRS and CDMA to remote control AtoN(aid to navigation), it is able to remove the communication shadow area. Even though there is a shadow area for individual communication method, we can select an optimum communication method. The compatibility of data has been enhanced as using of same data frame per communication devices. For the test, 8640 of data has been collected from the each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 99.4 %.

Improvement Plan of NFRDI Serial Oceanographic Observation (NSO) System for Operational Oceanographic System (운용해양시스템을 위한 한국정선해양관측시스템 발전방향)

  • Lee, Joon-Soo;Suh, Young-Sang;Go, Woo-Jin;Hwang, Jae-Dong;Youn, Seok-Hyun;Han, In-Seong;Yang, Joon-Yong;Song, Ji-Young;Park, Myung-Hee;Lee, Keun-Jong
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.16 no.3
    • /
    • pp.249-258
    • /
    • 2010
  • This study seeks to improve NFRDI Serial Oceanographic observation (NSO) system which has been operated at current observation stations in the Korean Seas since 1961 and suggests the direction of NSO for practical use of Korean operational oceanographic system. For improvement, data handling by human after CTD (Conductivity-Temperature-Depth) observation on the deck, data transmission, data reception in the land station, and file storage into database need to be automated. Software development to execute QA/QC (Quality Assurance/Quality Control) of real-time oceanographic observation data and to transmit the data with conversion to appropriate format automatically will help to accomplish the automation. Inmarsat satellite telecommunication systems with which have already been equipped on board the current observation vessels can realize the real-time transmission of the data. For the near real-time data transmission, CDMA (Code Division Multiple Access) wireless telecommunication can provide efficient transmission in coastal area. Real-time QA/QC procedure after CTD observation will help to prevent errors which can be derived from various causes.

Asterisk(*) Array structure based power reduction power distribution board (애스터리스크(*) 배열구조 기반 전력저감 수배전반)

  • Kim, Mi-Suk;Park, Dong-Sam
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.11
    • /
    • pp.138-144
    • /
    • 2017
  • With the increase in power consumption due to the surge in the demand for power, it is necessary to improve the quality or design of the power (supply) for the purpose of reducing the energy consumption and so reduce the power loss. The switchboard is a mechanical device that receives electricity from the electricity generation facilities of KEPCO and divides it into the facilities required for each building. Switchboards generally consist of enclosures, switches, power conductors, and control components. This study deals with energized power conductors, which constitute the main element in the switchboard. Through the measurement of the effective ac resistance, it was confirmed that the vertical array structure of the conventional type plate conductor is inefficient. If the effective AC resistance increases significantly, the sectional area of the conductor becomes relatively large due to the skin effect. In this study, we studied the energy and material savings that could be obtained using the asterisk (*) array structure, which minimizes the effective ac resistance by reducing the skin effect. The core technology principle of this study is the energy saving switchgear based on conductor resistance reduction technology utilizing the asterisk array structure. The present invention involves a plate-shaped conductor arrangement structure capable of canceling out the magnetic field generated on each of the plate conductors (rst or abc) of the AC power supply in the power distribution panel by mutual action. The effect of this structure is to reduce the amount of inductive reactance due to the increase in the cross-sectional area and reduction of the effective AC resistance.

Domestic Status for Acceptance of Various International Conventions relating to Marine Environment Management (해양환경관리 관련 각종 국제협약의 국내 수용 현황)

  • Kim, Kwang-Soo
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2006.11a
    • /
    • pp.221-237
    • /
    • 2006
  • Domestic laws such as Korea Marine Pollution Prevention Law which has been made and amended according to the conclusions and amendments of various international conventions, especially by MARPOL 73/78, were reviewed and compared with major contents of international conventions, and several alternative measures for legislating new laws or amending existing laws such as Korea Marine Pollution Prevention Law in accordance with new contents and recent amendments of existing and new international conventions were proposed. Annex VI of MARPOL 73/78 has been recently accepted in Korea Marine Pollution Prevention Law which should be applied to ships which are the moving point sources of air pollution at Sea rather than in Korea Air Environment Conservation Law which should be applied to automobiles and industrial installations which are the line and/or point sources of air pollution in land. International Convention for Ship's Ballast Water/Sediment Management should be accepted in Korea Marine Pollution Prevention Law or by a new law in order to prevent domes marine ecosystem and costal environment from the invasion of harmful exotic species through the discharge of ship's ballast water. International Convention for the Control of Harmful Anti-Fouling Systems on the Ships should be accepted in Korea Marine Pollution Prevention Law which should be applied to ships which are navigating in open sea and coastal waters rather than in Korea Noxious Chemicals Management Law. Basel Convention which shall regulate and prohibit inter-nations movements of noxious chemical substances should be accepted in Korea Marine Pollution Prevention Law in order to prevent the movement and transfer of scrap-purpose tanker ships containing bilge water of oil/water mixtures and chemicals remained on board from advanced countries to developing and/or underdeveloped countries and to conserve global marine environment after all.

  • PDF

Development of Remote Control Transmission based on an One-chip Microcomputer in Speed Sprayer asture Plant Genetic Resources (원칩 마이크로 컴퓨터(MCS-51)를 이용(移用)한 스피드 스프레이어의 원격조종(遠隔操縱) 변속장치(變速裝置) 개발(開發))

  • Jang, Ik Joo
    • Current Research on Agriculture and Life Sciences
    • /
    • v.8
    • /
    • pp.107-113
    • /
    • 1990
  • This study was attempted to develop a remote controllable speed sprayer in order to protect an operator from agricultural chemicals. For the purpose of remote controllable transmission was developed by using one chip microcomputer. The following results could be summarized in this study. 1. Remote controllable transmission developed had not made even a single mistake during the test performed 100 times repeat. Thus, it could that this machine was very accurate. 2. One chip microcomputer was made by machine language and its was with in 3 sec's which was the same as human did. 3. One chip microcomputer which was used in the experiment could be widely used to automation of agricultural machinery, since it is smaller and chiper than any other similar ones such as personal computer, lap tap, one board computer. 4. Since, farm tractor has the same type of transmission as this system, it also could be adapted to farm tractors. 5. In this experiment, transmission lever was remote controll were designed to operate simultaneously. Thus, this system developed was more complicate than conventional system. However, by removing this transmission lever and by mounting the remote controll system at the speed sprayer, it would be higher and easier to handle than the conventional one.

  • PDF

Sugar composition and glycemic indices of frequently consumed fruits in Korea (우리나라 다빈도 섭취 과일의 당 함량 및 혈당지수에 관한 연구)

  • Ryu, Ji-Hyun;Yim, Jung-Eun;Suk, Wan-Hee;Lee, Han-Song-Yi;Ahn, Hye-Jin;Kim, Young-Seol;Park, Cheon-Seok;Choue, Ryo-Won
    • Journal of Nutrition and Health
    • /
    • v.45 no.2
    • /
    • pp.192-200
    • /
    • 2012
  • Fruits are generally recommended for a balanced meal, as they are good sources of vitamins, minerals, and fiber, which may improve blood glucose control. However, fruits have simple sugars with a wide glycemic index (GI) range. The purpose of this study was to analyze the sugar content and composition and to determine the glycemic indices of the most frequently consumed fruits in Korea, including apple, tangerine, pear, water melon, persimmon, grape, oriental melon, and peach. The sugar content and composition of the fruits were analyzed by high performance anion-exchange chromatography (Dinonex model DX-600). The GI of the fruits was measured in 13 healthy subjects (seven females and six males) after permission was received from the University Hospital institutional review board (KHU-IRB 1114-06). The subjects consumed 50 g of glucose as a reference and carbohydrate portions of eight fruits. Blood samples were collected at 0, 30, 60, 90, and 120 min after consuming the fruits. The GI values for the fruits were calculated by expressing the increase in the area under the blood glucose response curve for each subject. As a result, the total sugar contents of 100 g fruits were: grape (13.9 g), apple (12.3 g), persimmon (11.9 g), oriental melon (11.2 g), watermelon (9.3 g), tangerine (8.9 g), peach (8.6 g), and pear (8.3 g). The GI values of the fruits were as follows: GI value of peach ($56.5{\pm}14.17$), watermelon ($53.5{\pm}18.07$), oriental melon ($51.2{\pm}18.14$), tangerine ($50.4{\pm}15.16$), grape ($48.1{\pm}14.05$), persimmon ($42.9{\pm}18.92$), pear ($35.7{\pm}14.38$), and apple ($33.5{\pm}11.92$). These findings will help individuals choose fruit for controlling blood sugar.

Effect of the Kind and Content of Raw Materials on Mechanical Performances of Hybrid Composite Boards Composed of Green Tea, Charcoals and Wood Fiber (녹차-숯-목재섬유 복합보드의 역학적 성능에 미치는 구성원료의 종류 및 배합비율의 영향)

  • Park, Han-Min;Heo, Hwang-Sun;Sung, Eun-Jong;Nam, Kyeong-Hwan;Lim, Jae-Seop
    • Journal of the Korean Wood Science and Technology
    • /
    • v.41 no.1
    • /
    • pp.64-76
    • /
    • 2013
  • In this study, eco-friendly hybrid composite boards were manufactured from green tea, three kinds of charcoals and wood fiber for developing interior materials to reinforce the strength performances and the functionalities in addition to performances of the green tea-wood fiber hybrid boards. The effects for the kind and the component ratio of raw materials on mechanical properties were investigated. Bending strength performances of hybrid composite boards were highest in the hybrid composite boards composed of green tea, fine charcoal and wood fiber on average. However, the difference caused by the kind of charcoals was not large. These values were was markedly improved than those of green tea - wood fiber hybrid composite boards reported in previous researches. And it was found that the bending strength performance decreased with increasing component ratios of green tea and charcoals. The difference between urea resins used as the binder showed the higher value in hybrid composite boards using $E_1$ grade urea resin than in those using $E_0$ grade urea resin, but the difference between hybrid composite boards manufactured by both resins decreased markedly than the green tea - wood fiber hybrid composite boards reported in previous research. The internal bond strength of hybrid composite boards was in the order of hybrid composite boards with fine charcoal, activated charcoal and black charcoal, and it was found that the hybrid composite boards with fine charcoal had a similar values to control boards composed of only wood fiber.

Touch-Pen Noise Reduction Using B-Spline Function (B-Spline 곡선을 이용한 터치펜 잡음제거)

  • Lee, Sang-Bum
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.17 no.6
    • /
    • pp.121-126
    • /
    • 2017
  • Recently, a lot of people use touch-pen devices such as smart phones and tab computers. To generate the picture and text, a user can give input or control the touch-pen device through simple or multi-touch gestures by touching the screen with a special stylus pen and/or one or more fingers. The accuracy and response time from the moment of contact with the touch board is very important to the touch device. Therefore, research is needed to find a way of removing the noise included in the touch signal quickly and efficiently. In this paper, we propose a method for removing a noise mixed in with a touch point coordinate which has been caused by a input pen on the touch screen. For effective filtering, the fast sampling of the coordinate corresponding to the noise from the input signal is required primarily. Secondly the total compensation of the touch coordinates using the characteristics of the B-Spline curve is applied to correct coordinates of the points. This method can ensure a real-time response than other algorithms. The applied performance evaluation method is comparing error pixels with evaluation values by dividing 10 intervals on the touch pad diagonally. Usually the average error is 7.1 pixels but our proposed method shows an average 4.1 errors. Therefore, our proposed touch pen method can express the input signal on the coordinates more correctly.

Reports on 'Meeting on the Revision of Guidelines for Clinical Research on Acupuncture' (WHO 침구임상 지침서 개정을 위한 국제회의 보고)

  • Park, Hi-Joon;Seo, Jung-Chul;Kim, Se-Hyun;Kim, Sang-Woo;An, Kyung-Eh;Lim, Sabina;Kim, Yong-Suk;Choi, Do-Young;Kang, Sung-Keel
    • Journal of Acupuncture Research
    • /
    • v.22 no.5
    • /
    • pp.195-199
    • /
    • 2005
  • The Working Group on the revision of Clinical Research Methodology for Acupuncture met in Seoul, Republic of Korea from 24 to 26 August 2005. The main objectives of the meeting were to review the regional publication guidelines for Clinical Research on Acupuncture, to make necessary revisions in the guidelines, to make recommendations on further collaboration and activities in the field of research on acupuncture, and to discuss scientific evidence-based approaches in the clinical research on acupuncture. Fourteen members from the eight Member States, one secretariat staff from the WHO Regional Office for the Western Pacific and ten observers from the Republic of Korea attended the meeting. The members presented their papers to review the current status of clinical research on acupuncture. The drafts of proposed revision to the previous guidelines for clinical research methodology on acupuncture were discussed extensively. The issues covered during the discussion included: the definition of the new terms; reorganization of clinical research design; revision and update of contents (e.g., control group); introduction of Institutional Review Board (IRB) on the section of ethical approval; additional outcomes including health-related quality of life (HRQOL), qualitative measures, etc. In the course of these discussions, the working group developed the revised guidelines for clinical research on acupuncture and made recommendations for promoting the dissemination of the revised guidelines.

  • PDF