• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.3-10
• /
• 1995

For most engineering materials are influenced by the dominant mechanism resisting crack extention under large scale yielding conditions. Continuum mechanics analysis shows that fracture toughness, in addition to depending on young's modulus, flow stress strain hardening exponent, and yield strain, should be nearly proportoinal to the effective fracture ductility obtained for the stress state characteristic for region ahead of the crack; plane stress or plane strain. It's known that, in most ductile materials, crack propagation of the material strongly governed by the $J_{IC}$ value, which is still difficult to determine for it's complicate and treble-some determinative process. This paper, on the assumption that, initiation of crack tip strain field reaches on the relationships between the critical value of J-integral ($J_{IC}$) and the local fracture strain(${\varepsilon}_c$) in uniaxial tensile test in the region of maximun reduction areas was described.

• Annals of Clinical Neurophysiology
• /
• v.24 no.2
• /
• pp.68-72
• /
• 2022

Posterior reversible encephalopathy syndrome (PRES) and reversible cerebral vasoconstriction syndrome (RCVS) are relatively uncommon neurological disorders. These two independent syndromes can be concurrent as a part of a continuum process; however, the specific mechanism is not well known. Although the relationship between RCVS and PRES is currently unclear, they could share a common pathophysiology. This case report aimed to determine the pathophysiology underlying the co-occurrence of PRES and RCVS in a patient with an acute exacerbation of chronic obstructive pulmonary disease.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.3
• /
• pp.95-100
• /
• 2004

This paper reports a potential problem in the electrical performance of the silicide film to silicon contacts with respect to the scaling trend in integrated circuit (IC) devices. The effects of elastic strain on the agglomeration of the coherent silicide film embedded in an infinite matrix are studied employing continuum linear elasticity and finite-difference numerical method. The interface atomic diffusion is taken to be the dominant transport mechanism where both capillarity and elastic strain are considered for the driving forces. Under plane strain condition with elastically homogeneous and anisotropic system with cubic symmetry, the dilatational misfit and the tetragonal misfit in the direction parallel to the film thickness are considered. The numerical results on the shape evolution agree with the known trend that the equilibrium aspect ratio of the film increases with the elastic strain intensity. When the elastic strain intensity is taken to be only a function of the film size, the flat film morphology with a large aspect ratio becomes increasingly unstable since the equilibrium aspect ratio decreases, as the film scales. The shape evolution results in a large decrease in contact to silicon area, and may deteriorate the electrical performances.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.589-592
• /
• 2004

We calculate the probability to form giant radio halos (${\~}$ 1 Mpc size) as a function of the mass of the host clusters by using a Statistical Magneto-Turbulent Model (Cassano & Brunetti, these proceedings). We show that the expectations of this model are in good agreement with the observations for viable values of the parameters. In particular, the abrupt increase of the probability to find radio halos in the more massive galaxy clusters ($M {\ge} 2{\times}10^{15} M_{\bigodot}$) can be well reproduced. We calculate the evolution with redshift of such a probability and find that giant radio halos can be powered by particle acceleration due to MHD turbulence up to z${\~}$0.5 in a ACDM cosmology. Finally, we calculate the expected Luminosity Functions of radio halos (RHLFs). At variance with previous studies, the shape of our RHLFs is characterized by the presence of a cut-off at low synchrotron powers which reflects the inefficiency of particle acceleration in the case of less massive galaxy clusters.

• Advanced Composite Materials
• /
• v.18 no.1
• /
• pp.77-93
• /
• 2009

This paper investigated the damage transition mechanism between the fiber-breaking mode and the fiber-avoiding crack mode when the fiber-length is reduced in the unidirectional discontinuous carbon fiber-reinforced-plastics (CFRP) composites. The critical fiber-length for the transition is a key parameter for the manufacturing of flexible and high-strength CFRP composites with thermoset resin, because below this limit, we cannot take full advantage of the superior strength properties of fibers. For this discussion, we presented a numerical model for the microscopic damage and fracture of unidirectional discontinuous fiber-reinforced plastics. The model addressed the microscopic damage generated in these composites; the matrix crack with continuum damage mechanics model and the fiber breakage with the Weibull model for fiber strengths. With this numerical model, the damage transition behavior was discussed when the fiber length was varied. The comparison revealed that the length of discontinuous fibers in composites influences the formation and growth of the cluster of fiber-end damage, which causes the damage mode transition. Since the composite strength is significantly reduced below the critical fiber-length for the transition to fiber-avoiding crack mode, we should understand the damage mode transition appropriately with the analysis on the cluster growth of fiber-end damage.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.829-844
• /
• 2015

In the current paper the results of a numerical simulation that were verified by a well instrumented experimental procedure for studying the arching effect over a trapdoor in sand is presented. To simulate this phenomenon with continuum mechanics, the experimental procedure is modeled in ABAQUS code using stress dependent hardening in elastic state and plastic strain dependent frictional hardening-softening with Mohr Coulomb failure criterion applying user sub-routine. The apparatus comprises rectangular trapdoors with different width that can yield downward while stresses and deformations are recorded simultaneously. As the trapdoor starts to yield, the whole soil mass deforms elastically. However, after an immediate specified displacement, depending on the width of the trapdoor, the soil mass behaves plastically. This behavior of sand occurs due to the flow phenomenon and continues until the stress on trapdoor is minimized. Then the failure process develops in sand and the measured stress on the trapdoor shows an ascending trend. This indicates gradual separation of the yielding mass from the whole soil body. Finally, the flow process leads to establish a stable vault of sand called arching mechanism or progressive collapse of the soil body.

• Korean Journal of Psychosomatic Medicine
• /
• v.10 no.2
• /
• pp.176-180
• /
• 2002

Hypnosis as a traditional healing method, in its recent development, has generated a multitude of techniques. These serve as practical tools which can be combined with other therapy techniques for the treatment of a variety of psychiatric and medical conditions. The empirical evidence for the effectiveness of hypnosis is considerable and proves its clinical impact in various areas of application. This case review describes the integration of hypnotherapeutic methods into the continuum of psychiatric encounters in a general practice. Guidelines for the application of hypnosis in approaching and treating each patients with headache, sexual dysfunction and bronchial asthma were illustrated. As hypotheses mechanism of effectiveness in psychosomatic disorders has been formulated. Training in hypnotherapy provides the psychiatrist with skills needed to address psychophysiological disorders. Emphasis is placed on the necessity and opportunity for research on the efficacy and specific technique of hypnosis in the psychosomatic disorders.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.31.2-31.2
• /
• 2016

We present our study of the correlation between the UV luminosity and the merging activities of nearby galaxies (d < 300 Mpc). Our study uses ~600 UV-selected galaxies with deep optical imaging data, where the UV selection is made using the GALEX Atlas of Galaxies (Gil de Paz et al. 2007) and the updated UV catalog of nearby galaxies (Yu Bai et al. 2015). Deep optical images allow us to classify merger features using visual inspection, and we also estimate unobscured SFR using UV continuum luminosity. The fraction of galaxies with merger features in each UV luminosity bins are obtained to see if how the fraction of galaxies with merging features changes as a function of UV luminosity, Finally, we will show, above what UV luminosity (or SFR), the merging mechanism becomes an important process in enhancing star formation of galaxies.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.1
• /
• pp.7-18
• /
• 2018

We have investigated the intensities and full width at half maximum (FWHM) of the high dispersion spectroscopic N III emission lines of AG Peg, observed with the Hamilton Echelle Spectrograph (HES) in three different epochs at Mt. Hamilton's Lick Observatory. The earlier theoretical Bowen line study assumed the continuum fluorescence effect, presenting a large discrepancy with the present data. Hence, we analyzed the observed N III lines assuming line fluorescence as the only suitable source: (1) The O III and N III resonance line profiles near ${\lambda}$ 374 were decomposed, using the Gaussian function, and the contributions from various O III line components were determined. (2) Based on the theoretical resonant N III intensities, the expected N III Bowen intensities were obtained to fit the observed values. Our study shows that the incoming line photon number ratio must be considered to balance at each N III Bowen line level in the ultraviolet radiation according to the observed lines in the optical zone. We also found that the average FWHM of the N III Bowen lines was about $5km{\cdot}s^{-1}$ greater than that of the O III Bowen lines, perhaps due to the inherently different kinematic characteristics of their emission zones.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1029-1035
• /
• 2014

The protolytic dissociation process of hydrochloric acid (HCl) and hydrofluoric acid (HF) is studied using the B3LYP and MP2 methods with the 6-311+G(d,p) basis set in the gas phase and in aqueous solution. To study the phenomena in detail, discrete and discrete/continuum models were applied by placing water molecules in various positions around the acid. The dissociation process was studied using the thermodynamic cycle involving the structures optimized both in the gas phase and in aqueous solution and was analyzed with two key energy factors, relaxation free energy (${\Delta}G_{Rex(g)}$) and solvation free energy (${\Delta}G_s$). Based on the results, we could understand the dissociation mechanism and wish to propose the best way to study acid dissociation process using the CPCM methodology in aqueous solution.