• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.162-169
• /
• 2000

This study was carried out to develop a continuously variable-speed transmission(CVT) for agricultural tractor. A full-toroidal CVT mechanism with four discs and six rollers was selected as a device for changing speed ratio continuously. In the step of system layout design, the sizes of roller cylinders and end-load cylinder, which were critical factors for controlling the variator, were designed. Also the control pressure range was designed to limit the contact pressure of variator. In order to make the maximum speed of vehicle as 30km/h, the planetary gear and the six pairs of gears were designed. Also the hydraulic clutch, silent chain, hydraulic manifold and electronic controller were designed. After the design, a prototype with CVT controller was developed and tested. The speed of vehicle was changed continuously to the speed set by driver and the settling time was about 0.52 second at the step-response test (reduction ratio of variator 2.0 to 1.0), which was acceptable as a response time for working with tractor.

• 한국가스학회지
• /
• 제28권1호
• /
• pp.59-64
• /
• 2024

본 연구에서는 초소형 특수목적형 전기자동차에 적용 가능한 초소형 변속기에 대한 연구를 진행하였다. 일반적으로 전기자동차에서는 다단 기어형태의 변속기를 삭제하고 모터의 출력을 제어하거나 감속기를 통해 초기 구동력을 확보한다. 그러나 전기카트나 경형 전기자동차와 같은 초소형 차량에서는 배터리 용량이 상대적으로 적기 때문에 적재 상태에 따라 주행 거리가 감소하거나 모터에 부하가 가해질 수 있다. 따라서 본 연구에서는 CVT(Continuously Variable Transmission)의 변속 메커니즘을 적용하여, 구배 상태나 적재 상태와 같은 필요한 상황에서 변속이 가능한 고단 0.625와 저단1.6의 기어비를 갖는 2단 구조의 감속기를 개발하였다. 선정된 기어비를 기반으로 변속기를 설계하고, 개발된 변속기의 동력 전달 효율을 검증하기 위해 시험기를 제작하였다. 이 시험기를 통해 변속기의 회전 속도와 부하량을 변화시키며 동력 전달 효율 특성을 확인하고, 변속과 구동 시 발생되는 발열 특성도 확인하였다. 그 결과를 토대로 CVT구조를 갖는 2단 구조의 변속기를 개발하였다.

• 오토저널
• /
• 제9권3호
• /
• pp.1-9
• /
• 1987

자동차용 CVT로서 여러 가지 장치가 연구되고 있으나 크게 나누어 다음의 5가지, 1)유압식 변속 기(hydrostatic transmission), 2)오버런닝 클러치(overrunning clutch CVT), 3) 전기식 CVT, 4)미 끄럼 클러치식 치차변속기(multispeed gearbox CVT with shipping clutch), 5)트랙션 전달장치(t raction drive)로 볼 수 있다. 이중 지금까지 자동차에 실제 적용되어 가장 큰 가능성을 보인 것 은 트랙션 전달장치 뿐이다. 따라서 본문에서는 1)-4)의 4가지 형태의 CVT에 대하여 간단히 서 술하고 트랙션 전달장치를 중심으로 설명하기로 한다.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.451-457
• /
• 2023

Global warming is causing abnormal climates such as floods, droughts, and typhoons all over the world. According to some scientists, carbon dioxide emitted from automobiles is the main cause of global warming. To cope with this, each country is making efforts to replace the existing fossil fuel-powered engine-driven cars with electric vehicles. In order to commercialize small electric vehicles in Korea, it is necessary to solve many problems such as improvement of hill climbing capacity and improvement of power performance. In this study, we propose a proprietary model for a continuously variable transmission(CVT) of a small electric vehicle that can be operated on hills, in which a spring is mounted on a driving pulley and a driven pulley. A prototype of the CVT model using a spring was manufactured and attached to a small electric vehicle body.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 동계 학술대회 논문집
• /
• pp.22-27
• /
• 2000

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 동계 학술대회 논문집
• /
• pp.28-33
• /
• 2000

• 오토저널
• /
• 제15권3호
• /
• pp.36-46
• /
• 1993

In CVT vehicle, the engine speed is completely decoupled from the vehicle speed within the range from maximum transmission ratio to minimum transmission ratio. This allows the engine to operate in optimal state(e.g. best fuel economy or maximum power mode.) In this study, the CVT control algorithm for optimal operation of engine is suggested. In order to implement the real time digital control of electro-hydraulic CVT system, a software called CVTCON has been developed. CVTCON also includes the CVT operation module, (2) system test module, (3) system control module and (4) data management module. By using the CVTCON and the electro-hydraulic CVT system, two modes of experiments were carried out: constant throttle opening mode and acceleration mode. From the experimental result, it was found that the algorithm suggested in this study showed optimal operation of the CVT system.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.43-55
• /
• 2001

A continuously variable transmission(CVT) mechanism composed of one differential gear unit and one continuously variable unit(CVU) can be classified according to the coupling of CVU and the direction of power flows. The mechanism has many advantages which are the decrease of CVT size, the increase of overall efficiency, the extension of speed ratio range and generation of geared neutral. The CVT mechanism considered here is the input coupled type which combines the functions of a 2K-H I type differential gear unit and a V-belt type CVU. One shaft of the CVU is connected directly to the input shaft and another shaft of it is linked to the differential gear unit. It is shown that some fundamental relations(speed ratios, power flows and efficiencies) for twelve mechanisms previously described are valid by various experimental studies, six of them produce a power circulation and the others produce a power split. Some useful comparisons between theoretical analysis and experimental results are presented. General properties also are discussed, which connect following power flow modes : (a) power circulation mode; (b) power split mode.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.157-166
• /
• 1999

This paper describes the launching characteristics of a passenger car using a Push-Belt type Continuously Variable Transmission(CVT) which equipped a wet type multi-plate clutch asa starting device and a solid flywheel with a torsional damper for a torsional coupling device. To reduce the torsional vibration of the drive-line , some torsional coupling devices were used for the passenger car equipped CVT having the clutch as a starting device especially . In this study, we developed the computer simulation program to investigate the launching characteristics of a passenger car equipped CVT using the mathematical models of this system. For the mathematical models of the vehicle, the CVT, the we type multi-plate clutch and the torsional damper, we obtained the specification and the necessary data through the reverse engineering of those. For the verification of our analysis, we performed the test of prototype car with different throttle positions at road and dynamometer. The launching characteristics of a passenger car considered here an acceleration performance and an ascending performance.

• Tribology and Lubricants
• /
• 제21권6호
• /
• pp.272-277
• /
• 2005

Continuously variable transmission (CVT) of toroidal type has a elliptical shape of contact zone under the elastohydrodynamic lubrication (EHL) condition, where the power is transmitted only by shearing the lubricant. Due to the small contact area of elliptical shape, the traction of the shear behaviors of lubricant over the contact zone is under extremely high contact pressure over 1.0GPa. During the power transmission by shearing the fluid, many kinds of mechanical movements occur such as squeezing, sliding, rolling and spin. Among the movements, the spin effect that is the most undesirable contact behavior in transmitting the power frequently makes significant abnormal wear damage. In this work, the analysis of elliptical contact of EHL with spin effect is performed, which will give very useful information to understand the traction behaviors in toroidal type of CVT system.