• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.18-26
• /
• 2007

The transport and removal characteristics of cobalt ions were investigated in a continuous electrodeionization with cation exchange textile (CEDI-CET). It was shown that the removal properties of cobalt ions are strongly dependent on the operating parameters such as temperature, flow velocity, and the solution pH. The transport and removal of cobalt ions was mainly related to the sorption on the surface and the convection and electro-migration through the ion exchange medium. In this study, the CEDI-CET showed good process performance for the removal of metal ions compared with the conventional CEDI with resins.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.176-178
• /
• 2003

Strip samples of AA 3103 were deformed by Continuous confined strip shearing (CCSS). The CCSS process was designed to provide a repeated shear deformation in metallic sheet materials. CCSS led to the formation of characteristic shear textures comprising a pronounced｛111｝＜uvw＞ orientations. The intensity of the deformation texture hardly increased with increasing number of CCSS passes. EBSD equipped in a FESEM with a high beam current revealed the formation of fine grains even after annealing for the recrystallization.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.3
• /
• pp.445-456
• /
• 1997

Continuous casting process is numerically analyzed using the continuum model in a non-orthogonal coordinate system. Flow damping in the mush is modeled by combining the viscosity dependence on liquid fraction in dilute mush and the permeability dependence on liquid fraction in concentrated mush. The effect of turbulence is indirectly considered by effective diffusivity determined elsewhere by experiment. The main objective is to investigate the effects of casting parameters such as casting speed and tundish superheat on the distribution of surface temperature, shell thickness, metallurgical length and centerline segregation. Some of the computed results are compared with available experiments, and reasonable agreements are obtained.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03a
• /
• pp.165-171
• /
• 1996

Recently, to improve the productivity in the continuous casting process, thin slab continuous caster which is one of the new steelmaking technologies by a high speed casting has been introduced. In the process of the thin slab continuous cast, there is more possibility than convnetional one that the deformation be occurred by the bulging of solidified shell, since the thickness of soliidfied shell is very thin as much as 60mm after the casting is finished. In some cases of severe bulging, there might be more breakout. In this paper, using finite difference method , solification analysis of slab is made as well as the thicknessof solidified shell and temperature are calculated. Also, based on the data of the calculated temperature, the deformed behavior of solidified narrow face is anlayzed with the MARC which is a package program for finite element analysis.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.110-120
• /
• 2011

As information technology rapidly develops and the period required to enter new technology shortens, there emerges a wide variety of alternatives for consumers. When there are many alternatives in the market, users choose after making comparisons. This process of making comparisons is our research key. We established a research model to find a mixed effect that comes from new attitudes to technology adoption and alternative's continuous usage intention. The effect is revealed through a relative attractiveness (RA) factor to explain a user's process of comparison. We empirically test our research model in the new media services, such as mobile TV, web TV, and mobile IPTV. According to our research results, a continuous usage intention of an existing technology is an important factor to explain the adoption of a new technology. So, the contribution of our research is in finding a role for the RA factor in research in new technology adoption.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.34-42
• /
• 1999

The discrete variables such as time and sequence must be considered for automating HAZOP analysis of batch processes in contrast with continuous processes. Because these variables can not be explained by the method used in the HAZOP analysis of continuous processes, we have developed the methodology for HAZOP analysis of batch processes on the basis of the relation between discrete variables and continuous ones. In this study, we have discussed the performance of the methodology on a Latex batch process to evaluate its effectiveness.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.67-73
• /
• 2010

This study began the study by instructing enterprises to change Batch Production into U-Line. This study suggested TPS U-Line building model process and applied it to some of their product line. By connecting concerned process elements into continuous operations. Outside orders were also switched to inside operations and executed in continuous operations, thereby about 100Km of transit distance became zero Km, Production lead Time was incredibly reduced. After all, 90% of Production Lead Time, 50% of handling fault, 3/4 of workers decreased and Productivity per Person enhanced which involves improving Batch Production into Continuous Production and applies it to the real world, so that small and medium enterprises can consult this study if the company is willing to make an improvement to their product line.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.109-113
• /
• 2010

We present the minimum weight optimum design of cross sectional for frame structures subject to natural frequency. The optimum design in this paper employ discrete and continuous design variables and Genetic Algorithms. In this paper, Genetic Algorithms is used in optimization process, and be used the method of Elitism and penalty parameters in order to improved fitness in the reproduction process. For 1-Bay 2-Story frame structure, in examples, continuous and discrete design variables are used, and W-section (No.1~No.64), from AISC, discrete data are used in discrete optimization. In this case, Exhaustive search are used for finding global optimum. Continuous variables are used for 1-Bay 7-Story frame structure. Two typical frame structure optimization examples are employed to demonstrate the availability of Genetic Algorithms for solving minimum weight optimum of frame structures with fundamental and multi frequency.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.205-210
• /
• 2007

The integration method of binary and real encoding in genetic algorithm is proposed to deal with design variables of various types in gear drive design. The method is applied to optimum design of multi-stage gear drive. Integer and Discrete type design variables represent the number of teeth and module, and continuous type design variables represent face width, helix angle and addendum modification factor etc. The proposed genetic algorithm is applied for the gear ratio optimization and the volume optimization(minimization) of multi-stage geared motor which is used in field. In result, the proposed design optimization method shows an effectiveness in optimum design process and the new design has a better results compared with the existing design.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.9-14
• /
• 1998

One of the areas in the continuous casting process that up to this point, has not been definitively instrumented is a method of reliably locating the part of a continuously cast strand that remains liquid for a period after the outer portion has solidified. To solve the problem. Electromagnetic Trandsducers(EMAT) which operate across an air gap without the need for a coupling medium has been developed. The system was designed to employ a through transmission technique which enhanced the signal-to-noise ratio. The Al 75$\times$75mm and 75$\times$100mm simulators with 2, 4, 8, 16, 32 mm hole respectively has been produced in order to verify the developed EMAT system and to measure to liquid core in continuous casting strand. The system developed can be employed for the optimization of torch cutting speed and for the final cut length of the bloom as well as calculation of average bloom temperature.