• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.118-122
• /
• 2000

In this study, Ringing is investigated by continuous wavelet transform. Ringing is considered to be one of the typical transient phenomena in the field of ocean engineering. The wavelet analysis is adopted to analyze ringing from the point that wavelet analysis is capable of frequency analysis as well as time domain analysis. The use mother wavelet is the Morlet wavelet. The relation between the frequency of the time series and that of wavelet can be clearly defined with Mor1et wavelet. Experimental data obtained by other researchers was used. The wave height time series and acceleration times series of the surface piercing cylinder were analyzed. The results show that the proposed scheme can detect typical frequency region by the time domain analysis which could hardly be detected if one relied on the frequency analysis.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.409-420
• /
• 2021

We propose a method to synthesize a color non-hogel-based computer-generated-hologram (CGH) from light field data of a three-dimensional scene with a hologram pixel pitch shared for all color channels. The non-hogel-based CGH technique generates a continuous wavefront with arbitrary carrier wave from given light field data by interpreting the ray angle in the light field to the spatial frequency of the plane wavefront. The relation between ray angle and spatial frequency is, however, dependent on the wavelength, which leads to different spatial frequency sampling grid in the light field data, resulting in color aberrations in the hologram reconstruction. The proposed method sets a hologram pixel pitch common to all color channels such that the smallest blue diffraction angle covers the field of view of the light field. Then a spatial frequency sampling grid common to all color channels is established by interpolating the light field with the spatial frequency range of the blue wavelength and the sampling interval of the red wavelength. The common hologram pixel pitch and light field spatial frequency sampling grid ensure the synthesis of a color hologram without any color aberrations in the hologram reconstructions, or any loss of information contained in the light field. The proposed method is successfully verified using color light field data of various test or natural 3D scenes.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.499-505
• /
• 2006

Bioventing efficiency was compared in a continuous and an intermittent(6hr injection and 6hr rest) air injection mode. Two lab-scale columns which packed with 5 kg of soil artificially contaminated by diesel oil were operated. The columns were maintained at the $25^{\circ}C{\pm}2.5$ in order to minimize the effect of exterior temperature variation. The flow rate of air injection mode were maintained constantly at the flow rate of 10 ml/min. The moisture of the columns was stably maintained at $60{\sim}80%$ of field capacity. The nutrient compounds were added to make C:N:P ratio as 100:10:l. The continuous and intermittent injection modes showed 67.56% and 69.63% reduction of initial TPH concentration during 90 days, respectively. Two venting modes showed similar results in the analysis of the trends of the hydrocarbon utilizing bacterial counts for operating periods. The carbon dioxide production rate of the continuous injection mode was higher than that of intermittent injection mode. The loss of diesel oil by volatilization in the continuous and intermittent injection modes were about 5% and 1%, respectively. The lower volatilization loss in the intermittent injection mode suggested that the biodegradation of TPH in the intermittent injection mode was greater than that of the continuous mode. These results suggested that the intermittent injection mode is more efficient than the continuous venting mode.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.289-295
• /
• 2015

By adopting a 2D time-dependent wave code, we investigate how mode-converted waves at the Ion-Ion Hybrid (IIH) resonance and compressional waves propagate in 2D density structures with a wide range of field-aligned wavenumbers to background magnetic fields. The simulation results show that the mode-converted waves have continuous bands across the field line consistent with previous numerical studies. These waves also have harmonic structures in frequency domain and are localized in the field-aligned heavy ion density well. Our results thus emphasize the importance of a field-aligned heavy ion density structure for ultra-low frequency wave propagation, and suggest that IIH waves can be localized in different locations along the field line.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1021-1023
• /
• 2000

This paper presents the preventive measure and the cause for field coils breaking away from the rotor, which lately occurred when No.1 hydro generator was operating in Chung-Ju Dam No.2 Hydro Power Station. In findings, we ascertained the truth of contact between rotor rim and field coils, and think that field coils will break away from the rotor because of mechanical stress according as continuous operation after completion. 1985. Therefore, we conclude that the preventive measure for such a phenomenon is that stopper should be installed between rotor rim and field coils, and bolts should be tightened because of operating characteristic however there are not the design standards for installing stopper in generator rotor internationally.

• ETRI Journal
• /
• v.16 no.1
• /
• pp.1-15
• /
• 1994

A computationally-efficient approach to the calculation of the transient field of an acoustic radiator was developed. With this approach, a planar or curved source, radiating either continuous or pulsed waves, is divided into a finite number of shifted and/or rotated versions of an incremental source such that the Fraunhofer approximation holds at each field point. The acoustic field from the incremental source is given by a 2-D spatial Fourier transform. The diffraction transfer function of the entire source can be expressed as a sum of Fraunhofer diffraction pattern of the incremental sources with the appropriate coordinate transformations for the particular geometry of the radiator. For a given spectrum of radiator velocity, the transient field can be computed directly in the frequency domain using the diffraction transfer function. To determine the accuracy of the proposed approach, the impulse response was derived using the inverse Fourier transform. The results obtained agree well with published data obtained using the impulse response approach. The computational efficiency of the proposed method compares favorably to those of the point source method and the impulse response approach.

• Journal of KIBIM
• /
• v.13 no.4
• /
• pp.13-25
• /
• 2023

Recently, interest in the necessity and practical application of BIM (Building Information Modeling) is also increasing in the civil engineering field. However, there are difficulties in building BIM models and utilizing BIM modeling in the civil engineering field due to various reasons. To this end, it is necessary to develop management tools and research on management methods that can effectively utilize the BIM library in the civil engineering field. Libraries in the civil engineering field are complementary to each other, so library management in consideration of library management in various combinations and continuous updates is important. BIM library management was proposed through the development of a management tool that reflects these characteristics, which is expected to contribute to improving productivity in the field of civil design.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.779-784
• /
• 2001

For electrical vehicles, switched reluctance drives present a promising alternative-compared to asynchronous and synchronous (permanent magnet) concepts. For these applications, a very wide field weakening range is a key issue. Other requirements include high torque output from a small machine and low current ripple at the DC-side without the use of bulky filters - when powered from fuel cells or advanced Lithium-Ion-batteries. A new converter and control strategy according to these requirements is presented and compared to existing designs. The comparison is done for a drive system with a continuous power rating of 30 to 40 kW.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.44-47
• /
• 2003

Continuous decreases in national budget for the field of agricultural engineering indicate that it plays less important role in Korean agriculture compared to the past. It also suggests that its function should be changed in order to meet the needs of future agriculture. Unfortunately, there are few private companies for agricultural engineering except for farm machinery. Fostering private business for agricultural engineering may be one of the top priority for the development of the field.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.737-746
• /
• 2017

In this paper, we discuss the existence theorem for multiple vortex solutions in the non-Abelian Chern-Simons-Higgs field theory developed by Aharony, Bergman, Jafferis, and Maldacena, on a doubly periodic domain. The governing equations are of the BPS type and derived by Auzzi and Kumar in the mass-deformed framework labeled by a continuous parameter. Our method is based on fixed point method.