• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.231-234
• /
• 1994

Concentrated stresses due to the tunnel excavation easily cause failure around opening in the soft rock mass layer. Thus, while excavatng tunnel in the soft rock mass layerm it is very important to predict the possibility of failure or yielding zones around tunnel boundary. There are two typical methods to predict these; 1) the analysis of field monioring data and 2) numerical analysis. In this study, it was attempted to describe the time-dependent or progressive rock mass manner due to the continuous failure and fracturing caused by surrounding underground openings using the second method. In order to apply the effects of progressive failure underground, an iterative technique was used with the Hoek and Brown rock mass failure theory. By developing and simulating, three different shapes of twin tunnels, this research simulated and estimated the proper size of critical pillar width between tunnels, distributed stresses on the tunnel sides, and convergences of tunnel crowns. Moreover, results out progressive failure technique based on the Hoek and Brown theory were compared with the results out of Mohr-Coulomb theory.

• 보존과학연구
• /
• 통권14호
• /
• pp.35-44
• /
• 1993

The way of prevention for the continuous corrosion progress in iron antiquities after excavation and conservation treatment have been studied. The corrosion occuring have been found the oxidation of ferrous ions in the presence of chloride. The consideration to control the activity of chloride is important of controling relative humidity for the stable environment of the storage. One of the method that keeps archeological iron antiquities recommend the storage of special vinyl film(poly-vinyl alcohol film) with silica gel to control the relative humidity. Although this method is not permanent, it's very well efficiency of economy and convenience at present.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.1-4
• /
• 2006

A down construction method is frequently used in these days to reduce popular discontent and to assure sufficient working space at early stage in downtown area. There are two main problems in the existing down construction method. One is a confliction between frame works and excavation works, and the other is a cold joint in retaining wall which is unavoidable due to a sequence of concrete placement and induces a water leakage. Therefore, a new method is needed to overcome these problems. The CWS (buried wale Continuous Wall System) method was developed by authors. By replacing RC perimeter beam with embedded steel wale, the steel frame works of substructure can be simplified and the water leakage can be prevented using continuous retaining wall. Consequently, the improved duality and reduction of construction period can be obtained from CWS method.

• 한국건축시공학회지
• /
• 제6권2호
• /
• pp.81-89
• /
• 2006

A down construction method is frequently used in these days to reduce popular discontent and to assure sufficient working space at early stage in downtown area. There are two main problems in the existing down construction method. One is a confliction between frame works and excavation works, and the other is a cold joint in retaining wall which is unavoidable due to a sequence of concrete placement and induces a water leakage. Therefore, a new method is needed to overcome these problems. The CWS (buried wale Continuous Wall System) method was developed by authors. By replacing RC perimeter beam with embedded steel wale, the steel frame works of substructure can be simplified and the water leakage can be prevented using continuous retaining wall. Consequently, the improved qualify and reduction of construction period can be obtained from CWS method.

• 터널과지하공간
• /
• 제6권4호
• /
• pp.342-347
• /
• 1996

The changes of electromagnetic wave velocity in rock were monitored to investigate rock behaviors due to the drill & blasting excavations through georadar tomography during the construction of the underground rock laboratory (5 m wide, 6 m high, and 140 m long) at Mabuk-Ri, Goosung-Myun, Yongin-Si, Kyunggi-Do. Two horizontal boreholes spaced 1.4 m apart were drilled parallel to the test tunnel before excavating it, high-resolution crosshole georadar tomography with about 500 MHz electromagnetic waves was performed at pre-excavation phase (May, 1996) and post-excavation phase (August, 1996). The data were acquired with the combination of 34 sources and 44 receivers with space of 0.3 m. Only 11 continuous receivers were selectively utilized with one fixed source. Sampling interval was 0.4 ns and each trace has 512 samples. The first arrival of each trace was picked manually with a picking software. The total number of rays used in inversion amounted to 34x11 and the size of pixel was determined to be 0.3 m. As an inversion technique, SIRT(Simultaneous Iterative Reconstruction Technique) was applied in this study. The velocity of electromagnetic waves at post-excavation phase decreased as large as 15% in comparison with that at pre-excavation phase, which may be attributed to the creation of micro-cracks in rock due to excavations and saturation with groundwater. Small amount of borehole deviation made a critical effect in radar tomography. Totally different tomograms were created after borehole deviation corrections.

• 미술이론과 현장
• /
• 제14호
• /
• pp.7-32
• /
• 2012

The exhibition was started in 2010 in the New Acropolis Museum of Athens and embarked a journey since 2011 as a travelling exhibition inside Greece and abroad. The main purpose of the exhibition was to draw attention of the general public to the value of the 'rescue excavation' and of cultural heritage of Greece, by presenting the reconstruction bust of a girl whose skull was found in Kerameikos cemetery of ancient Athens. The new Kerameikos excavation was initiated by the construction of Metropolitan Railway lines in the center of Athens between 1992 to 1998. It revealed a pit of a mass burial where about 150 people were inhumed in a very hasty way without proper funeral rites or offerings. These bodies are identified as the victims of the infamous plague of Athens in the first years of the Peloponnesian War(430-426 BC). The epidemic disease killed almost one third of the city population including Pericles, and brought extreme fear and panic to the Athens society. The traditional funerary rites were totally disrupted, and the social decorum and the morality among the citizens became enfeebled. The plague and the civil war were the decisive factors to end the Golden Age of Democratic Athens. However, the exhibition organizers did not focus on the tragic aspect of this disaster and its casualties. Their main concern was to simplify the scholarly works of archaeological excavation and microchemistry analysis so that the exhibition viewers will easily understand and empathize the living value of the scholarly works of ancient Greek civilization. The centripetal element of the exhibition was the vivid face of an 11 years old ancient girl 'Myrtis', which was carefully reconstructed based on both the scientific data and artistic imagination. Also the set up of the exhibition was structured in order to stimuli cognitive and emotional experience of the visitors who witnessed the rebirth of a vibrant human being from an ancient debris. The museologists' continuous efforts to promote projects of contemporary artists, publications, and school programs related to the exhibition indicate that the ulterior motive of this exhibition is the cultural education of the present and future generation through the intimate experiences of ancient Greek life. Also this is the reason why the various museums that held the travelling exhibition try to make the presentation as a gesture of memorial service for an anonymous Athenian girl who deceased circa 2400 years ago. The pragmatic efforts of Greek scholars and museologists through exhibition show us a way to find a solution to the continuous threat of cultural resources by massive construction projects and land development, and to overcome public indifference to the history and cultural heritage.

• 한국터널지하공간학회 논문집
• /
• 제24권5호
• /
• pp.395-409
• /
• 2022

기존 암반 굴착공법이 갖는 한계점을 극복하기 위해 최근 연마재 워터젯 공법을 활용하는 연구가 활발히 진행되고 있다. 연마재 워터젯 암반굴착 공법은 암반에 연속적인 자유면을 형성하여 발파 시 발생하는 진동을 저감하고 굴착효율을 증진시키는 효과가 있다. 그러나 연마재 워터젯 절삭성능은 암반의 물리적 성질에 따라 변화한다. 따라서, 다양한 물리적 성질을 가진 암반이 혼재하는 굴착현장 특성상 효과적인 워터젯 활용을 위해서는 다양한 암종의 절삭성능을 분석하는 것이 필수적이다. 본 연구에서는 현무암과 화강암을 대상으로 수압, 이격거리, 이송속도를 변화시키며 절삭실험을 수행하고 결과를 분석하였다. 실험결과, 현무암은 화강암보다 평균적으로 약 41% 깊게 절삭되고, 절삭 폭은 약 18.5% 좁게 형성되었다. 본 연구결과는 향후 현무암과 같은 강도가 낮고 공극이 큰 암반 굴착현장에서 연마재 워터젯을 적용할 시 유용한 기초자료로 활용될 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.297-314
• /
• 2016

With the mining depth continuously increasing, gas emission behaviors become more and more complex. Gas emission is an important basis for choosing the method of gas drainage, gas controlling. Thus, the accurate prediction of gas emission is of great significance for coal mine. In this work, based on the sources of gas emission from the heading faces and the fluid-solid coupling process, we established a gas continuous dynamic emission model, numerically simulated and applied it to the engineering. The result was roughly consistent with the actual situation and shows the model is correct. We proposed the measures of reducing the excavation distance and borehole gas drainage based on the model. The measures were applied and the result shows the overproof problem of gas emission disappears. The model considered the influence factors of gas emission wholly, and has a wide applicability, promotional value. The research is of great significance for the controlling of gas disaster, gas drainage and pre-warning coal and gas outbursts based on gas emission anomaly at the heading face.

• 전산구조공학
• /
• 제9권4호
• /
• pp.199-207
• /
• 1996

최근 10여년간 터널 막장면에서 연속적인 지지가 가능해진 연약 점토지반에서의 실드터널 시공법이 개발되었다. 이러한 실드공법은 굴착시 융기단계가 조절될 수 있으므로 테일보이드 내부로 토사의 이동을 감소시키는데 많은 도움을 줄 수 있다. 본 논문에서는 이러한 밀폐형 실드의 일종인 슬러리 실드와 토압식 실드의 계측치를 이용하여 실드터널 해석을 위해 개발된 2차원 탄소성 프로그램 EPSHILD에 적용시켜 검증하였다. 보다 정확한 해석수행을 위해 시공단계에 상응하는 굴착단계를 결정하였고 융기하중과 하중분담률을 고려하였다. 본 연구는 실드 시공과정에서 발생하는 즉시침하에 근거를 둔 것이며 장기침하에 대해서는 고려하지 않았다.

• 한국터널지하공간학회 논문집
• /
• 제17권5호
• /
• pp.563-573
• /
• 2015

For hard rock subsea tunnels the most challenging rock mass conditions are in most cases represented by major faults/weakness zones. Poor stability weakness zones with large water inflow can be particularly problematic. At the pre-construction investigation stage, geological and engineering geological mapping, refraction seismic investigation and core drilling are the most important methods for identifying potentially adverse rock mass conditions. During excavation, continuous engineering geological mapping and probe drilling ahead of the face are carried out, and for the most recent Norwegian subsea tunnel projects, MWD (Measurement While Drilling) has also been used. During excavation, grouting ahead of the tunnel face is carried out whenever required according to the results from probe drilling. Sealing of water inflow by pre-grouting is particularly important before tunnelling into a section of poor rock mass quality. When excavating through weakness zones, a special methodology is normally applied, including spiling bolts, short blast round lengths and installation of reinforced sprayed concrete arches close to the face. The basic aspects of investigation, support and tunnelling for major weakness zones are discussed in this paper and illustrated by cases representing two very challenging projects which were recently completed (Atlantic Ocean tunnel and T-connection), one which is under construction (Ryfast) and one which is planned to be built in the near future (Rogfast).