• 대한토목학회논문집
• /
• 제35권5호
• /
• pp.1179-1189
• /
• 2015

장대레일을 적용한 교량상 콘크리트 궤도는 온도하중 및 시제동 하중에 의하여 종방향 상호작용력이 크게 발생하며, 이를 해소하기 위하여 활동체결장치 또는 저체결력 체결장치와 같은 특수체결장치를 적용하거나 레일신축이음장치를 설치하여야 한다. 슬라이딩 슬래브 궤도는 교량과 궤도 슬래브 사이에 슬라이드층을 두어 상호작용을 저감시킬 수 있는 것으로 알려져 있다. 이 연구에서는 슬라이딩 궤도와 일반 콘크리트 궤도를 적용한 교량에 대하여 상호작용 해석 결과를 제공한다. 해석 결과 슬라이딩 궤도를 적용함으로써 장대레일에 발생하는 부가 축력을 현저히 저감시킬 수 있는 것으로 밝혀졌으며, 그 차이는 장경간 및 연속교에서 더욱 큰 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.433-440
• /
• 1998

For many decades, railroad technology was used to set up tracks with jointed rails and lengths in accordance with rolling and handling technology. The joints lead to drawbacks in the track and in controlling rising maintenance costs. So, railroad engineers became interested in eliminating joints to increase loads, speeds and improvements in rolling, welding, and fastening technology. Continuous welded rail(CWR) track has many advantages over the conventional jointed-rail track. In the case of the elimination of rail joints, it may cause the track to be suddenly and laterally buckled by thermal forces and vehicle load. Thermal forces are caused by an increase in the temperature of railway track. For many years, many analytical and experimental investigations have been conducted to improve the safety of CWR track by various research center in many country. In this paper, CWR track model and CWRB program is developed for buckling analysis using finite element method(FEM). The finite element discretization is used for a rail element with a total of 14 degrees of freedom. The stiffness of the fasteners, tie, and ballast bed is included by a set of spring elements. The investigation on the buckling modes and temperature of CWR track is presented in this paper

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.793-799
• /
• 2004

In track a third weakness point is joint part, turnout part, curve part. One of them joint part of rail have been known to the most weak point by loosen of joint bar and fish bolt due to impulse and vibration by wheel contact at times. In addition happen to deformation and failure at end of rail, failure and miniature of ballast gravel. Finally impact between wheel and rail become origin cause of a welded rail, noise and vibration. riding condition deterioration, besides track failure. In the present domestic, Thermite and Gas pressure weldings have been used to continuous welded rail(CWR), however stiffness and confidence in quality is lower than Flash butt welding method. FRW have the excellent capacity, however have a shortcoming large scale of machine and power equipment. Therefore we will introduce Mobile Flash Butt Welder can weld in track.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.546-547
• /
• 2009

To ensure stability of continuous welded rail in extremely hot weather is important to the railway industry's goal of operational safety and maintenance. Rail temperature has direct influence on track buckling. According to climate condition, distribution of rail temperature is different. In this study, the fluctuation of rail temperature were investigated under the domestic climate condition (air temperature, humidity, insolation, etc)

• 한국안전학회지
• /
• 제32권4호
• /
• pp.28-33
• /
• 2017

A sharp curved ballasted track on earthwork that was connected with a direct fixation slab track on steel box railway bridges have been deformed and damaged despite the frequently maintenance by a restoring force of sharp curved rail and track-bridge interaction forces such as axial forces and longitudinal displacement of continuous welded rail(CWR) owing to their structural characteristics, calling for alternatives to improve the structural safety and track irregularity. In this study, the authors aim to prove a cause of deformation for the sharp curved ballasted tracks to enhance the structural safety and track irregularity of ballasted track in service. A track-bridge interaction analysis and a finite-element method analysis for the sharp curved ballasted track were performed to consider the axial force and longitudinal displacement of CWR, the temperature and the effect of restoring force of sharp curved rail. From the results, the deformation of the sharp curved ballasted track with adjusted sleeper spacing from 833mm to 590mm were significantly reduced.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.719-726
• /
• 2006

전세계적으로 널리 사용되고 있는 장대레일 궤도는 유지 보수 비용을 절감시키고, 궤도구성요소들의 수명이 길어진다는 장점을 가지고 있다. 그러나, 혹서기에 레일의 높은 온도 상승으로 인해 장대레일 궤도에는 매우 큰 압축력이 작용하게 되고, 이는 장대레일 궤도의 장출(좌굴)을 발생시켜 열차의 탈선으로 인한 사고로 이어진다. 본 연구에서는 장대레일 궤도의 좌굴에 많은 영향을 주는 궤도의 구성요소들 중에서 레일의 단면적과 단면2차모멘트 그리고 체결구의 파손과 병진 및 회전방향의 강성이 장대레일 궤도의 좌굴에 미치는 민감도를 파악하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.315-323
• /
• 2010

장대레일 교체주기는 자갈궤도 레일두부 표면요철과 레일 휨피로의 상관관계 분석을 통해 산정되었다. 본 연구에서는 국내 도시철도(서울메트로) 콘크리트궤도에서 레일두부 표면요철량에 따른 레일 휨응력을 측정하였다. 또한, 콘크리트궤도 레일두부 표면요철, 속도와 레일 휨응력의 상관관계를 분석하였다. 결론적으로, 중회귀분석을 통해 운행속도(U), 표면요철(v, w)에 따른 레일 휨응력(Y) 예측식을 도출하였다. 본 연구결과는 콘크리트궤도 장대레일 교체주기를 수립하기 위한 기초데이터로 활용이 가능할 것이다.

• 한국강구조학회 논문집
• /
• 제19권4호
• /
• pp.345-355
• /
• 2007

장대레일은 동절기에 기온하강으로 인한 인장력을 발생하는데 중위온도 이하로 떨어져 파단이 발생되면 인장파단과 레일 간에 틈이 발생되며 이를 개구부라 한다. 이 개구부를 차륜이 통과하면 충격하중이 발생하며, 큰 손실이 발생할 수 있는 열차탈선이 발생할 수 있다. 본 연구에서는 동적해석을 위해 개구부를 가진 궤도와 차량의 상호작용을 고려한 동적해석모델을 제안하였다. 궤도와 차량의 선형시스템은 비선형 헤르찌안 접촉 스프링에 의해 연성되었으며 전체 궤도-차량 시스템 운동방정식을 정식화하였다. 그리고 개구부에서의 상호작용 현상을 고려하여 궤도 불균일부의 함수를 정의하고 개구부에서의 전후방 레일 사이의 개구량을 고려하였다. 비선형 방정식을 풀기위해 동적해석은 수정된 Newton-Raphson 방법에 근거한 Newmark - $\beta$ 방법에 의해 수행되었다. 그리고 차량속도, 개구량, 레일지지강성에 따른 매개변수를 조건으로 수치해석을 수행하였다.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.239-245
• /
• 2003

In this paper, the track impact factor of conventional line was evaluated using the data for wheel load measured in field and the properties of current operating trains. The equation for track impact factor was presented through the statistical analysis of variational ratio in wheel load and compared with other design equations in domestic and foreign countries. A review on the safety of track system in conventional line was made from the relationship between the velocity and the corresponding impact factor. It was found that the impact factor from the proposed equation is a little less than the values from the equations adopted in both AREA and domestic railway, while it is same as the equation for continuous welded rail(CWR) in Japan. Therefore it could be said that the track satisfies a criteria for dynamic load caused by the train and the corresponding level of safety is guaranteed for dynamic load of the train

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.400-405
• /
• 2005

The vertical slope of railway track is the differences of attitude for the horizontal distances between two positions of railway. It is better to be small vertical slope for the comfortable of passengers and the operation of railway system. However, the variable vertical slope is required that the simple vertical slope causes the huge quantities of embankment and cutting, the continuous welded rail tunnels, the continuous welded rail bridges, etc,. This research is for the relation between the vertical slopes and the trainset performances. This research shows that the effective vertical slopes for the operation of railway. The velocity of car and operation time and the consumed energy was considered for each vertical slope and type of car power system. The result of suitable vertical slope from this research is to be used for the design of railway plan.