• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.40-44
• /
• 2006

Sandwich structures, which are composed of a thick core between two faces, are commonly used in many engineering applications because they combine high stiffness and strength with low weight. Accordingly, the usage of sandwich structure is very widely applied to the aircraft, the automobile and marine industry, etc., because of these advantages. In this paper, we have investigated the buckling protection of an inner structure plate and the useful corrugated configuration for contact, and the fabrication method of the inner structure plate for large area using the continuous molding process. Also, we have guaranteed the accuracy of the molding process through the micro corrugated mold fabrication and secured the accuracy and analyzed aspect properties of the inner structure plate fabricated for a large area using the partial mold process.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.214-219
• /
• 2010

Polyethylene(PE) films were photocrosslinked by continuous UV irradiation. Benzophenone addition as low as 1wt% into the PE film increased the gel fraction up to 96%. The photocrosslinking was attributed to the recombination of PE radicals generated upon UV irradiation, which was enhanced by the hydrogen abstraction of the added benzophenone. Also the crossliked PE showed higher thermal stability and decreased crystallinity with increasing UV energy as shown by TGA, XRD and DSC analysis. It was also possible to fix 5.4% octadecane into PE by the photocrosslinking. The crosslinked PE film containing octadecane showed lower tensile strength and modulus coupled with higher extension compared to that without octadecane, which can be used as a new plasticizing method for the crosslinked PE film.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.207-208
• /
• 2006

Sandwich structures, which are composed of a thick core between two faces, are commonly used in many engineering applications because they combine high stiffness and strength with low weight. In this paper, we have investigated the buckling protection of an inner structure plate and the useful corrugated configuration for contact, and the fabrication method of the inner structure plate for large area using the continuous molding process. Also, we have guaranteed the accuracy of the molding process through the micro corrugated mold fabrication and analyzed aspect properties of the inner structure plate fabricated for a large area using the partial mold process.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.163-170
• /
• 1997

The present paper describes an investigation into the application of the genetic algorithm(GA) in the optimization of structural design. Stochastic processes generate an initial population of designs and then apply principles of natural selection/survival of the fittest to improve the designs. The five test functions are used to verify the robustness and reliability of GA, and as a numerical example, minimum weight of a cantilever composite laminated beam with a mix of continuous, integer and discrete design variables is obtained by using GA with exterior penalty function method. The design problem has constraints on strength, displacements, and natural frequencies, and is formulated to a multidimensional nonlinear form. From the results, it is found that the GA search technique is very effective at finding the good optimum solution as well as has higher robustness.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.137-138
• /
• 2014

The aim of this research is suggesting the method of obtaining well-graded aggregates for concrete replacing the recycled aggregate which size range is from 5 to 13 mm to currently used gap-graded natural aggregates which size range is only 13 to 25 mm. according to the tests results, the workability of concrete was improved with replacing the aggregates of 5 to 13 mm of size range because of compensating gap-grading. Furthermore, there was an improvement in compressive strength when the aggregates of 5 to 13 mm of size range was replaced because obtained well-graded aggregates contributed on increasing adhesiveness and filling internal pore system. Comparing replacing recycled aggregate to natural aggregate, there was no significant difference on the performances.

• 한국주조공학회지
• /
• 제38권1호
• /
• pp.9-15
• /
• 2018

Electromagnetic continuous casting (EMCC) was used to fabricate Ti-6Al-4V alloys with properties suitable for medical applications. Ti-6Al-4V alloy ingots fabricated by EMCC were subjected to heat treatment, such as residual stress removing (RRS), furnace cooling after solution treatment (ST-FC) and water-cooling after solution treatment (ST-WC), in order to obtain characteristics suitable for the standard. After component analysis, the microstructure and mechanical properties (tensile strength and elongation) were evaluated by ICP, gas analysis, OM, SEM, a Rockwell hardness tester and universal testing machine. The Ti-6Al-4V alloy ingot fabricated by EMCC was fabricated without segregation, and the lamellar structure was observed in the RRS and ST-FC specimens. The ST-WC specimen showed only martensite structure. As a result of evaluating the mechanical properties based on the microstructure results, we found that the water-cooled heat treatment condition after the solution treatment was most suitable for the Ti-6Al-4V ELI standard.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권4호
• /
• pp.91-97
• /
• 2003

연속교의 내측지점에는 최대모멘트가 발생한다. 보다큰 모멘트가 작용하면 내측지점에 국부적 항복이 발생할 수 있고 소성거동을 하면서 모멘트를 재분배 시킨다. 강도설계법인 LFD방법은 탄성해석으로부터 구한 부모멘트의 10%를 막연히 재분배 시켜주고 있다. 그러나 ALFD방법은 내측지점에서 국부항복에 의하여 발생되는 모멘트를 계산하여 설계에 반영하도록 하고있다. 이러한 국부항복에 의하여 발생되는 모멘트를 자생 모멘트라 한다. 자생모멘트를 구하기 위해서는 모멘트-비탄성회전각곡선이 필요하다. 본 논문에서는 조밀단면에서 AASHTO 지침시방서에서 제시한 모멘트-비탄성회전곡선을 아용하여 자생모멘트를 구하였다. 또한 ALFD 한계상태 규준을 적용하여 3경간 연속합성교를 설계하였다.

• 한국수산과학회지
• /
• 제37권4호
• /
• pp.345-353
• /
• 2004

Target strength (TS) of Japanese common squids (Todarodes pacificus) were measured using 38 and 120 kHz split beam scientific echosounders under the live condition. For the TS measurement of an individual, a total of 3 squids (mantle length (ML): 22.8, 25, and 27 cm) were used using small fishhook method, whereas for measurement of swimming angle, a total of 8 squids (ML: 21-27 cm) were used under live condition, confined with net cage with 2 m diameter At the same time, two underwater video cameras enabled continuous monitoring of squid behavior. Considering normal behavior, the mean TS at 38 and 120 kHz varied from -48.6 to -45.9 dB, and from -46.5 to -44.6 dB, respectively In both frequencies, mean TS at 120 kHz is relatively higher than that of 38 kHz, approximately 1.3-2.5 dB. From free living condition, the mean swimming angle of the squlds was $-24^{\circ}$. The results of the measurement will be provided basic information for conducting acoustic surveys of the squid.

• 유통과학연구
• /
• 제12권4호
• /
• pp.31-39
• /
• 2014

Purpose - This study investigates the following two issues. First, we attempt to find the important determinants of housing investment and to identify their significance rank using survey panel data. Recently, the expansion of global uncertainty in the real estate market has directly and indirectly influenced the Korean housing market; households demonstrate a sensitive reaction to changes in that market. Therefore, this study aims to draw conclusions from understanding how the impact of financial strength of the household is related to house investment. Second, we attempt to verify the effectiveness of diverse indices of financial strength such as DTI, LTV, and PIR as measures to monitor the housing market. In the continuous housing market recession after the global crisis, the government places top priority on residence stability. However, the government still imposes forceful restraints on indices of financial strength. We believe this study verifies the utility of these regulations when used in the housing market. Research design, data, and methodology - The data source for this study is the "National Survey of Tax and Benefit" from 2007 (1st) to 2011 (5th) by the Korea Institute of Public Finance. Based on this survey data, we use panel data of 3,838 households that have been surveyed continuously for 5 years. We sort the base variables according to relevance of house investment criteria using the decision tree model (DTM), which is the standard decision-making model for data-mining techniques. The DTM method is known as a powerful methodology to identify contributory variables for predictive power. In addition, we analyze how important explanatory variables and the financial strength index of households affect housing investment with the binary logistic multi-regressive model. Based on the analyses, we conclude that the financial strength index has a significant role in house investment demand. Results - The results of this research are as follows: 1) The determinants of housing investment are age, consumption expenditures, income, total assets, rent deposit, housing price, habits satisfaction, housing scale, number of household members, and debt related to housing. 2) The impact power of these determinants has changed more or less annually due to economic situations and housing market conditions. The level of consumption expenditure and income are the main determinants before 2009; however, the determinants of housing investment changed to indices of the financial strength of households, i.e., DTI, LTV, and PIR, after 2009. 3) Most of all, since 2009, housing loans has been a more important variable than the level of consumption in making housing market decisions. Conclusions - The results of this research show that sound financing of households has a stronger effect on housing investment than reduced consumption expenditures. At the same time, the key indices that must be monitored by the government under economic emergency conditions differ from those requiring monitoring under normal market conditions; therefore, political indices to encourage and promote the housing market must be divided based on market conditions.

• 한국임상수의학회지
• /
• 제39권6호
• /
• pp.311-318
• /
• 2022

Appropriate suture technique is crucial for successful tracheal anastomosis. However, standards for an ideal suture method have not yet been established. A previous study suggested tracheal anastomosis using barbed sutures that do not require knots; however, their use in small animals has not been reported. In this study, we aimed to compare knotless barbed sutures with conventional smooth sutures in terms of maximum tensile strength and suturing time in canine tracheal models to demonstrate the feasibility of using barbed sutures in tracheal anastomosis in dogs. Tracheal segments harvested from nine beagle dog cadavers were randomly assigned to three suture groups: barbed suture (B), smooth suture in simple interrupted pattern (SI), and smooth suture in simple continuous pattern (SC). The maximum tensile force and suturing time were compared according to the suturing method, and the mode of failure was evaluated. The average suturing time was 3.29 min in the B group; 4.41 min, SC group; and 8.99 min, SI group (p < 0.001). The average maximum tensile force in the SC group was 134.97 N, which was stronger than the SI (110.57 N) and B groups (103.10 N) (p < 0.05 and p < 0.01, respectively). The difference between the B and SI groups was not significant (p = 0.05). The B group demonstrated comparable mechanical strength and shorter suture time compared with the SI group. Therefore, tracheal anastomosis using barbed sutures could be an effective alternative to conventional smooth sutures in dogs.