• Journal of Veterinary Clinics
• /
• v.34 no.5
• /
• pp.374-376
• /
• 2017

This report describes a case of postpartum uterine rupture associated with retained placenta and sequential acute metritis, not dystocia. A 14-month-old Bichon Frise bitch presented with continuous vaginal bleeding. She delivered five puppies 3 days ago and expelled four placentas on the next day. After then, anorexia, acute depression with continuous vaginal haemorrhage developed. Plain radiography showed decreased serosal detail, and ultrasonography showed irregularly thickened uterine wall and ascites. Blood-tinged peritoneal fluid was an exudate with bacteria. Ovariohysterectomy was curative for the patient, and four full-thickness perforated holes were identified on both sides of the uterine horns.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.581-592
• /
• 2000

To obtain an excellent product and decide on optimum molding conditions, it is important to establish the relationship between molding conditions and viscosity. The composites is treated as a pseudoplastic fluid, and the expansional/contractional viscosity of the fiber-reinforced polymeric composites is measured using the parallel plastometer, and the model for flow state has been simulated with the viscosity. The effects of expansional slip parameter $\alpha_{e}$, and expansional/contractional viscosity ratio ${\mu}_{\gamma}$, on the mold filling parameters are also discussed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.89-92
• /
• 2004

The influence of a single fracture intersection on density-driven immiscible flow is compared between wetting (water into air) and nonwetting (Trichloroethylene into water) flows. At low supply rates, the intersection acted as a hysteretic gate to pulsed flow of the wetting phase, but had minimal influence on nonwetting phase flow. For both cases, increasing the supply rate led to the formation of continuous fluid tendrils that crossed the intersection without interruption. The wetting experiment returned to pulsed flow as the supply rate was decreased, while the nonwetting experiment maintained a continuous flow structure. Results suggest a fundamental difference between wetting and nonwetting phase flows in fracture network.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.587-593
• /
• 2004

In this paper, flow characteristics of plasma flow in a micro-tube were investigated experimentally using micro particle image velocimetry(micro-PIV). For comparison, the experiments were repeated for deionized(DI) wale. instead of plasma. Both velocity profiles of plasma and do-ionized water are well agreed with the theoretical velocity distribution of newtonian fluid. We also carried out generating plasma-in-oil droplet formation at a Y-junction microchannel. In order to clarify the hydrodynamic aspects involved in plasma droplet formation, Rhodamine-B were mixed with plasma only for visualization of plasma droplet. With oil as the continuous phase and plasma as the dispersed phase, plasma droplet can be generated in a continuous phase flow at a Y-junction. For given experimental parameters, regular-sized droplets are reproducibly formed at a uniform flow conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1991

The purpose of this study is to lay groundwork for a complete analysis of two component flow by analyzing a single component flow made of continuous fluid without dispersed phase. In order to achieve uniform velocity distributions which are desirable in designing an optimum spray column direct contact heat exchanger, the influence of injection nozzle orientation has been investigated for axial and radial injections. The results that radial injection ensures more uniform velocity distributions compared to the axial case. The flow characteristics in a spray column have been investigated with various L/D values and inlet velocities, the most uniform internal velocity distributions have been obtained for the case of L/D=10 and 0.1m/sec. In the present investigation, it is shown that radial injection method for the continuous flow is advantageous in obtaining desirable uniform velocity distributions in a spray column. It is also found that as the value of L/D increases and the inlet velocity decreases, the flow improves to be better uniform velocity distributions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.70-81
• /
• 2019

An improved three dimensional Rankine source method is developed to solve numerically water wave problems in time domain. The free surface and body surface are both represented by continuous panels rather than a discretization by isolated points. The integral of Rankine source 1/r on free surface panel is calculated analytically instead of numerical approximation. Due to the exact algorithm of Rankine source integral applied on the free surface and body surface, a space increment free surface source distribution method is developed and much smaller amount of source panels are required to cover the fluid domain surface than other numerical approximation methods. The proposed method shows a higher accuracy and efficiency compared to other numerical methods for various water wave problems.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.1
• /
• pp.17-24
• /
• 2011

In Computer Graphics, interaction between a particle-based fluid and a rigid body is important. In General, this interaction has been simulated in a discrete environment. As a result, there have been lots of errors. The larger the time step is used, the bigger the error is. This paper describes how to minimize the error in a discrete environment. To be specific, the collision handling method is that estimates particle collision using a signed distance function increases continuously according to space. At the time a fluid particle and a rigid body model collide, the exact collision time and the position is estimated. Through this, we propose the method how to be simulated the interaction between a fluid and a rigid body model as a continuous environment.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.2
• /
• pp.260-263
• /
• 2004

Short-bowel syndrome is functionally defined as a state of malabsorption following loss of small bowel, which comprises the sequelae of nutrient, fluid, and weight loss. The proximal segment of the bowel of a patient with intestinal atresia is usually grossly distended and atonic. In contrast, distal segment is smaller. For this reason, anastomosis of the proximal and the distal segment is technically difficult and may cause no propulsion even when they are anastomosed. We experienced that continuous drip ileostomy feeding with the secretions from the proximal stoma stimulated the distal bowel to accommodate and resolved many sequelae following loss of small bowel in a patient with short-bowel syndrome due to IIIa ileal atresia.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1254-1264
• /
• 1999

A three-dimensional coupled turbulent fluid flow and solidification process were analyzed in a continuous casting process of a steel slab with Electromagnetic Brake(EMBR). A revised low-Reynolds number $k-{\varepsilon}$ turbulence model was used to consider the turbulent effects. The enthalpy-porosity relation was employed to suppress the velocity within a mushy region. The electromagnetic field was described by Maxwell equations. Tile application of EMBR to the mold region results in the decrease of the transfer of superheat to the narrow face, the increase of temperature in free surface region and most liquid of submold region, and the higher temperature gradient near the solidifying shell. The increasing magnetic flux density effects mainly to the surface temperature of the solidifying shell of narrow face, hardly to the one of wide face. It is seen that in the presence of EMBR a thicker solidifying shell is obtained at the narrow face of the slab.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.159-164
• /
• 2001

A novel fluidized-bed reactor was designed and installed for bioleaching in a semi-continuous way, by which a process for bioleaching-cyanidation of Guangxi Jinya refractory gold arsenical concentrate was studied. An arsenic extraction rate reaches 82.5% after 4-day batch biooxidation of the concentrate under the optimized condition of pH 2.0, ftrric ion concentration 6.5g/L and pulp concentration 10%. And leaching rate of gold in the following gold cyanidation is over 90%. The parameters of three series fluid-bed reactors exhibit stability during the semi-continuous bioleaching of the concentrate. Arsenic in the concentrate can be got rid of 91% after 6-day leaching. Even after 4 days, 82% of arsenic extraction rate was still obtained. The recovery rates of gold are 92% and 87.5% respectively in cyaniding the above bioleached residues. The results will provide a base for further commercial production of gold development.