• 대한수학회지
• /
• 제45권4호
• /
• pp.923-952
• /
• 2008

In this paper several continuities and homeomorphisms in computer topology are studied and their applications are investigated in relation to the classification of subs paces of Khalimsky n-dimensional space $({\mathbb{Z}}^n,\;T^n)$. Precisely, the notions of K-$(k_0,\;k_1)$-,$(k_0,\;k_1)$-,KD-$(k_0,\;k_1)$-continuities, and Khalimsky continuity as well as those of K-$(k_0,\;k_1)$-, $(k_0,\;k_1)$-, KD-$(k_0,\;k_1)$-homeomorphisms, and Khalimsky homeomorphism are studied and further, their applications are investigated.

• Archives of Plastic Surgery
• /
• 제43권4호
• /
• pp.311-315
• /
• 2016

In Korea, lateral canthoplasty, along with medial epicanthoplasty, has become popular over the past years to widen the horizontal length of the palpebral fissure. However, the effect of the surgery differs greatly depending on the shape and structure of the eyes. If over-widened, complications such as eversion, scarring, and conjunctival exposure may occur. Thus, the author of this study suggests a more effective and safe method for lateral canthal lengthening that causes minimal complications. A total of 236 patients underwent lateral canthoplasty between July 2007 and December 2015. For each patient, a triangular flap 4-5 mm away from the lateral canthus was elevated and rotated 45 degrees laterally while the continuity of the lower eyelid gray line was maintained. A new lateral canthus was created by fixating the rotation flap to the lateral orbital rim with minimal skin trimming and tension-free sutures, preventing relapse and maintaining a triangular shape. In more than 95% of cases, effective and satisfactory extension was achieved. On average, a 3 mm extension of the lateral canthus was achieved. There were minor complications such as wound dehiscence, webbing, and scarring, which were easily corrected. The author not only extended the lateral canthus 3-4 mm laterally but also maintained the continuity of the gray line on the lower lid as a more natural-looking triangular shape, while minimizing complications such as webbing and conjunctival exposure.

• 패션비즈니스
• /
• 제16권5호
• /
• pp.57-73
• /
• 2012

The main objective of this research was to understand the characteristics of pleats design through the analysis of modern female fashion as they appear in the 'Collections' from '09 A/W to '12 S/S. Data collection of 1027 was done through the review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of three cities; Milan, New York, Paris. Along with the qualitative interpretation of pleats design, statistical analysis of frequency and ${\chi}^2$-test were completed for data analysis. The main findings were as follows; 1. The five types of pleats design were founded in the order of accordion, knife, box, inverted, and sunburst pleats. The frequency and ratio of pleats design occurency showed significant difference between collections. 2. There were significant difference between the types of pleats and their line characteristics of thickness, continuity, length, direction. = Thin fabrics with delicate fine folds were mainly appeared in accordion and sunburst pleats. On the other hand, midium thickness fabrics were used for knife, box & inverted pleats, however, the different images were projected according to the width and the number of folds, characteristics of fabrics and textures. = In all the type of pleats but sunburst, continuity line was appeared the most. The discontinuous lines were appeared the most in the layered types and, sometimes, at some construction lines to add some decorative details or design variations. = The long line were the most frequently appeared in long one-pieces or long skirts of knife, accordion, sunburst pleats. While, the shorter lines showed the most frequently in box and inverted pleats, which mainly used for skirts or the lower part of one-piece. = For the line directions, the vertical lines were the most frequently appeared, and followed by mixed and diagonal line. In mixed or diagonal lines, same type of pleat was repeated in one design. For diagonal lines, one direction was mainly used, however, the symmetrical arrangements or repeated diagonal pleats in various directions also used. In mixed lines, the type of one or two diagonal and one vertical line was the most frequently appeared.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2768-2774
• /
• 2011

In this paper, we investigate the methods to improve the position accuracy using DGNSS(Differential Global Navigation Satellite System). Then we configure the real-time DGNSS environment with use of GPS and MSAS as SBAS(Satellite Based Augmentation System) currently being in service by Japan. And we verify the improvement of position accuracy and the continuity of GPS correction data through the realtime DGNSS test in Joongang line, Kyungbu line, Honam line.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.96-99
• /
• 1993

대면적 액정 표시판 (Liquid Crystal Display:LCD) panel내(內)의 구동소자인 비정질 실리콘 (amorphous silicon) 박막 트랜지스터 (Thin Film Transistor:TFT)의 구동신호전달 소자특성 향상을 위한 본(本) 연구의 목적은 액정 panel TFT 제조공정 상(上)의 증착금속 전극박막들의 Test Elements Group(TEG) metal line pattern별(別) 전기적 저항특성 평가에 있다. 현(現) TFT 전극용(用)으로 개발이 진행 중(中)인 Aluminum(Al), Tantalum(Ta) 및 Chromium(Cr) 이 특성평가 대상 금속 박막으로 선정 되었으며, 이들 금속막의 증착 thickness 와 TEG metal line width가 저항특성 변수로 성립 되었다. 본(本) 실험을 통해 금속 박막의 TEG line width별(別) 체적(體積)저항 (bulk resistance), 면(面)저항(sheet resistance), 비(比)저항 (resistivity) 및 기판 상(上)의 metal pattern 위치 변화에 따른 전기적 저항 uniformity 특성변화 평가가 있었다. TEG metal line 측정 변위에 따른 저항율의 선형변화 특성도 연구 되었으며, metal line별(別) 전기적 연속, 불연속 배선 단락 특성(electrical continuity test) 관찰도 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제13권3호
• /
• pp.225-236
• /
• 2008

본 연구는 국제물류시장에서 활동하고 있는 복합운송주선업체가 기존 고객과 지속적인 거래관계를 유지하기 위해 어떤 요인이 중요한지 규명하기 위하여 관계마케팅의 개념과 도구를 적용하여 실증적으로 분석하였다. 연구결과, 고객과 지속적인 관계 지향적인 활동요인으로서 고객과 접촉강도(contact identity with customer), 상호개방성(two-way communication), 협력적 의도(cooperative intention)는 거래관계의 지속성(relationship continuity)에 정(+)의 영향을 미치는 것으로 나타났다. 추가로 구매방식(온라인/오프라인 의존도)과 서비스의 형태(표준과 맞춤형)의 상황별 분석에 있어서는 서비스의 형태별로는 거래의 지속성에 차이가 없었으나, 구매방식별로는 차이가 있는 것으로 나타나 오프라인 거래방식보다 온라인 거래방식 의존도가 높은 경우 거래관계의 지속성을 확보하는데 필요한 별도의 마케팅 전략을 수립하여 실행에 옮길 필요성을 제기하였다. 아울러 복합운송주선업체가 관계마케팅을 활용하는데 따른 시사점과 향후 연구 과제를 제시하였다.

• 지질공학
• /
• 제24권2호
• /
• pp.171-178
• /
• 2014

In seismic reflection data processing, the crossdip correction effectively focuses the stacking energy near the sharp bends of a crooked survey line. Additionally, approximate 3-D information on the reflector (e.g., true crossdip angle and lateral continuity) are locally investigated as a by-product of the crossdip correction procedure. Improvement of the signal-to-noise ratio and estimation of reflector crossdip attitude are tested, in terms of both common midpoint bin direction and processing-line type, using synthetic seismic reflection data. To effectively image the reflection energy near bends in seismic survey lines, straight-line binning is preferred to slalom-line binning.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.109-116
• /
• 2011

In this paper, we investigate the scheme to improve the position accuracy using GNSS(Global Navigation Satellite System). Then we configure the real-time DGPS environment with use of NTRIP currently being in service on the DGNSS central office of MLTM(Ministry of Land and Transportation). And we verify the improvement of position accuracy and the continuity of GPS correction data through the DGPS test in Chungbuk line and Joongang line.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제39권1호
• /
• pp.37-47
• /
• 2000

Number concept is basic in mathematics education. But it is very complex and is not easy to understand real number concept, because of its infinity. This study tried to show that what percents of secondary school mathematics teachers in Korea understood the properties of real number, such as cardinality, continuity, relation with real line, and infinity, which were written by verbal language.

• Composites Research
• /
• 제17권4호
• /
• pp.25-31
• /
• 2004

본 연구에서는 다중세포로 구성된 타원형 단면 복합재료 블레이드의 정밀 1차원 보 해석모델을 개발하였다. 보의 정식화를 위하여 Reissner의 반보족에너지 함수를 이용하였으며, 고전적인 강성도 및 유연도법을 결합한 혼합보 이론 체계를 구축하였다. 타원단면의 특성계수들을 구하기 위해 단면의 외곽선을 유한개의 선분으로 분할하고 여기에 Gauss 적분을 수행하였다. 또한, 단면을 구성하는 각 세포에 대해 4개의 연속방정식이 충족되도록 구성하였다. 개발된 보 이론을 단일 및 이중세포로 구성된 타원형 복합재료 블레이드에 적용하였으며, 다차원 정밀 유한요소 해석 결과와 비교하여 그 타당성을 확보하였다.