• 정보처리학회논문지B
• /
• 제8B권5호
• /
• pp.493-500
• /
• 2001

동영상 데이터의 장면 분할은 내용기반 분석을 위해 필요한 기초작업이다. 본 논문에서는 동영상의 매 프레임을 워터쉐드 알고리즘을 통해 객체 중심의 작은 영역들로 나누어 각 영역이 연속적인 프레임 상에서 계속 존재하는가를 파악하는 방법을 통해 장면을 구분하는 새로운 영역기반 장면 분할 기법을 제안한다. 이를 위해 각 영역들에 대한 형태와 공간상의 유사도를 측정해 영역들의 움직임 정도에 따라 동영상 데이터를 동적 구간과 정적 구간으로 나누고 인접한 구간간의 유사도에 따라 그룹화 하는 방법을 통해 장면 분할을 시도한다. 제안하는 기법은 객체들을 표현하는 각 영역을 비교 대상으로 삼기 때문에 명암 변화나 변화에도 오검출 하지 않으면서 효과적으로 장면을 구분해낼수 있는 장점을 갖는다.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.386-394
• /
• 2002

The present work is aimed at investigating an unusual variation in flow and performance characteristics of a small propeller fan at low flow rates. A performance test of the fan showed dual performance characteristics, i.e., radial type characteristics at low flow rates and axial type at high flow rates. Dual performance characteristics of the fan are numerically investigated using viscous flow calculations. The Finite Volume Method is used to solve the continuity and Navier-Stokes equations in the flow domain around a fan. The performance parameters and the circumferentially averaged velocity components obtained from the calculations are compared with the experimental results. Numerical values of the performance parameters show good agreement with the measured values. The calculation simulates the steep variations of performance parameters at low flow rates and shows the difference in the flow structure between high and low flow rates. At a low flow coefficient of $\Phi$=0.2, the flow enters the fan in an axial direction and is discharged radially outward at its tip, which is much like the flow characteristics of a centrifugal fan. The centrifugal effect at low flow rates makes a significant difference in performance characteristics of the fan. As the inlet flow rate increases, flow around the fan changes into the mixed type at $\Phi$=0.24 and the axial discharge at $\Phi$=0.4.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1950-1963
• /
• 1995

A modification of the approximate-factorization method is made to accelerate the convergency rate and to take sufficiently large Courant number without loss of accuracy. And a stable implicit finite-difference scheme for solving the incompressible Navier-Stokes equations employed above modified method is developed. In the present implicit scheme, the volume fluxes with contravariant velocity components and the pressure formulation in curvilinear coordinates is adopted. In order to satisfy the continuity condition completely and to remove spurious errors for the pressure, the Navier-Stokes equations are solved by a modified SMAC scheme using a staggered gird. The upstream-difference scheme such as the QUICK scheme is also employed to the right hand side. The implicit scheme is unconditionally stable and satisfies a diagonally dominant condition for scalar diagonal linear systems of implicit operator on the left hand side. Numerical results for some test calculations of the two-dimensional flow in a square cavity and over a backward-facing step are obtained using both usual approximate-factorization method and the modified one, and compared with each other. It is shown that the present scheme allows a sufficiently large Courant number of O(10$^{2}$) and reduces the computing time.

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.386-392
• /
• 2015

Flow characteristics inside a 10 inch ball valve have been analyzed using three-dimensional numerical analysis and experiments. Continuity and three-dimensional Reynolds-averaged Navier-Stokes equations have been used as governing equations for the numerical analysis. The numerical model has been constructed through the grid dependency test and validation with the results of experiments to ensure reliability and numerical effectiveness. The shear stress transport (SST) model has been used as the turbulence closure. The experimental test-rig has been constructed to measure pressure, temperature and flow rate along the pipeline. Some valve opening angles have been tested to evaluate the flow characteristics inside the ball valve and pipeline. The results show that the rapid pressure variations is observed while the valve opening angle decreases, which caused by flow separation at the downstream of the ball valve.

• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.93-101
• /
• 1986

정지수역(靜止水域)에서 연직상향(鉛直上向)으로 방류(放流)되는 평면부력(平面浮力)?의 거동을 연속방정식(連續方程式), 운동량수송식(運動量輸送式) 및 추적물(追跡物) 수송식(輸送式)에 의하여 수치적(數値的)으로 해석한다. 이 해석은 유함수(流凾數)와 과수송식(過輸送式)을 도입하고 Prandtl 난류모형(亂流模型)을 이용하였다. 방류밀도(放流密度) Froude 수(數)가 4~32인인 부력(浮力)?의 발달된 흐름영역(領域)에서 구한 ?중심선의 속도(速度)와 온도변화(溫度變化), ?주변수역(周邊水域)의 온도분포(溫度分布)와 흐름양상은 기존자료와 잘 맞음을 확인할 수 있다. 적분형해석(積分型解析)에 필요한 퍼짐율과 확산비(擴散比)가 방류밀도(放流密度) Froude 수(數)와 방류구(放流口)로부터의 거리의 함수로 유도된다.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2992-2998
• /
• 2013

차세대 이동통신 시스템은 음성 트래픽뿐만 아니라 데이터, 화상, 비디오와 같은 멀티미 디어 트래픽을 지원하여야 하므로 더 많은 무선 자원을 요구한다. 본 논문에서는 OFDMA 시스템에서 모바일 멀티미디어 서비스를 위한 사용자 및 부채널 우선순위 기반 자원할당 방안을 제안한다. 제시된 방안들을 통하여 실시간 클래스의 연속성을 보장하고 비실시간 가입자를 최대로 수용할 수 있다. 시뮬레이션은 총 데이터 처리량과 블럭킹률에 집중한다. 시뮬레이션 결과는 기존의 방법에 비하여 우수함을 보였다.

• Water Engineering Research
• /
• 제2권3호
• /
• pp.179-185
• /
• 2001

The time consuming and expensive nature of experimental research on scouring processes caused by flowing water makes it attractive to develop numerical tools for the predication of the interaction of the fluid flow and the movable bed. In this paper the numerical simulation of scour by a wall jet is presented. The flow is assumed to be two-dimensional, and the alluvium is cohesionless. The solution process, repeated at each time step, involves simulation of a turbulent wall jet flow, solution of the convection-diffusion of sand concentration, and prediction of the bed deformation. For simulation of the jet flow, the governing equations for momentum, mass balance and turbulent parameters are solved by the finite volume method. The SIMPLE scheme with momentum interpolation is used for pressure correction. The convection-diffusion equation is solved for sediment concentration. A boundary condition for concentration at the bed, which takes into account the effect of bed-load, is implemented. The time rate of deposition and scour at the bed is obtained by solving the continuity equation for sediment. The shape and position of the scour hole and deposition of the bed material downstream of the hole appear realistic.

• 지역사회간호학회지
• /
• 제16권4호
• /
• pp.467-477
• /
• 2005

Purpose: This study was to identify adolescents' smoking behavior and the status and need of smoking prevention education for adolescents. Method: The subjects were 375 students selected through convenient sampling from three middle schools and three high schools in Jeonbuk. Data were collected through a questionnaire survey and analyzed using SPSS 10.1. Result: The smoking rate was 20.8% and 83.7% the students experienced smoking prevention education. Students were educated by a special instructor (39.8%) or a health teacher (26.8%). Among the teaching methods, lecture was 69.4%, but some students (30.7%) wanted anti-smoking school. Among the students, 85.0% answered they want smoking prevention education and 46.7% said that it should be covered in regular curriculum. Conclusion: High interest and continuity are emphasized for the success of smoking prevention education. In addition, various teaching methods need to be developed including anti-smoking school, lectures, counselling and long term education program. Moreover, smoking prevention education programs need to be covered in regular curriculum.

• 한국환경과학회지
• /
• 제24권4호
• /
• pp.505-514
• /
• 2015

The grid-based water balance of watershed scale was assessed in the mountainous area of Pyosun catchment in Jeju Island after analyzing precipitation, evapotranspiration, and runoff from January 2008 to December 2013. The existing results of direct runoff, evapotranspirtion, and groundwater recharge comparing to precipitation were presented 22.0%, 25.6%, and 52.4%, respectively, in Pyosun catchment. However, this study indicated each component shows 14.5%, 24.2%, and 61.0%, respectively, in the mountainous area of Pyosun catchment. Therefore, groundwater recharge rate in the mountainous area appears higher than 10% comparing to the overall catchment. It would be analyzed that the amount of direct runoff is relatively small. Moreover, this difference could be generated because of the spatial discontinuities in the process of estimating the total amount of precipitation in the mountainous area. Therefore, the grid-based spatial analysis to maximize the spatial continuity would be useful for providing a more reasonable result when the total amount of water resources are evaluated in mountainous areas in the future.

• 한국정보처리학회논문지
• /
• 제3권6호
• /
• pp.1636-1645
• /
• 1996

본 논문에서는 패턴을 효과적으로 분류하기 위하여 화상자료의 특성인 이웃 화소 간의 종속성을 잘 표현해 주는 깁스확률장의 크리크를 바탕으로 2차원 조건부 모멘트 를 제안하였다. 이 알고리즘 구축은 공간정보를 갖는 조건부 모멘트를 이용하여 특정 벡터를 추출하는 과정과 패턴을 분류하는 과정으로 분리하여 생각한다. 특정벡터를 추출하는 과정은 하나의 패턴에 대해 깁스분포의 크리크로 표현된 파라미터를 추정한 다음, 2차원 조건부 모멘트들을 계산하여 특정벡터로부터 제안된 판별거리함수를 계 산하여 여러 원형 패턴 가운데 최소거리를 산출한 미지의 패턴을 원형패턴으로 분류 한다. 제안된 방법의 성능을 검증하기 위하여 대문자와 소문자 52자로 된 훈련 데이 타를 만들어 486 PC 66Mhz에서 실험을 한 결과 97.5% 이상의 분류성능이 있음을 밝혔 다.