• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.87.1-87.1
• /
• 2011

For commercial applications, MEA development must be optimized in order to achieve high performance and low cost. There are many factors that affect the performance of MEA. Especially, the optimization of the method for preparing catalyst layer has great effect on the performance of MEA. Various methods have been used to prepare the catalyst layer of MEA. Among them, spraying method has a merit in that catalysis lay can be prepared with very flexible changes in catalyst layer as well as in the solvent composition of catalyst ink. In addition, in order to reduce the time required for manufacturing catalyst layer, an effort has been made to change the nozzle size and injection pressure of spray system. Further, the operation condition of spray system was changed in various ways in an effort to prepare optimum catalyst layer of MEA. Having optimized the operation condition of spraying system, comprehensive and diverse experiments were carried out concerning various factors that affect the performance of MEA. The present research report describes the results of more sub-categorized and more detailed experiments about the important factors (Nafion$^{(R)}$ ionomer, Relative humidity) which have been shown in previous experiments to exert greater effect on the performance of MEA.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.1
• /
• pp.3-9
• /
• 2000

Arc-melted alloys of TiAl-(o.25, 0.5, 1.0at%) Si were isothermally oxidized at 800, 900 and $1000^{\circ}C$ in air for 60hr. It was found that the oxidation resistance of the prepared TiAl-Si alloys was much better than that of pure TiAl, being progressively increasing with an increase in the Si content. This was attributed to the formation of $SiO_2$in addition to ($TiO_2$+$Al_2$$O_3$) oxides which formed in TiAl alloys with and without silicon additions. However, the silica formation within the oxide layer unfortunately accelerated the oxide scale spallations. During oxidation, all the elements in the base alloy diffused outward, whereas oxygen from the atmosphere diffused inward. The oxides were primarily composed of an outer thick $TiO_2$layer, an intermediate diffuse $Al_2$$O_3$layer and an inner $TiO_2$layer. A small amount of $SiO_2$was present all over the oxide scale and some voids were found around the intermediate layer.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.569-595
• /
• 2007

Particularly in wireless communications, link errors severely affect the quality of the services due to the high error probability and the specific error characteristics (burst errors) in the radio access part of the network. In this work, we show that thorough analysis and appropriate modeling of radio-link error behavior are essential to evaluate and optimize higher layer protocols and services. They are also the basis for finding network-aware cross-layer processing algorithms which are capable of exploiting the specific properties of the link error statistics, such as predictability. This document presents the analysis of the radio link errors based on measurements in live Universal Mobile Telecommunication System (UMTS) radio access networks as well as new link error models originating from that analysis. It is shown that the knowledge of the specific link error characteristics leads to significant improvements in the quality of streamed video by applying the proposed novel network- and content-aware cross-layer scheduling algorithms. Although based on live UMTS network experience, many of the conclusions in this work are of general validity and are not limited to UMTS only.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.207-211
• /
• 2009

In this study, we attempted to develop a convenient aluminizing process, using Al-Ti mixed slurry as an aluminum source, to control the Al content of the aluminized layer as a result of a one-step process and can be widely adopted for coating complex-shaped components. The aluminizing process was carried out by the heat treatment on disc and rod shaped S45C steel substrates with Al-Ti mixed slurries that were composed of various mixed ratios (wt%) of Al and Ti powders. The surface of the resultant aluminized layer was relatively smooth with no obvious cracks. The aluminized layers mainly contain an Fe-Al compound as the bulk phase. However, the Al concentration and the thickness of the aluminized layer gradually decrease as the Ti proportion among Al-Ti mixed slurries increases. It has also been shown that the Al-Ti compound layer, which formed on the substrate during heat treatment, easily separates from the substrate. In addition, the incorporation of Ti into the substrate surface during heat treatment was not observed.

• Korean Journal of Materials Research
• /
• v.20 no.8
• /
• pp.434-438
• /
• 2010

The selenization process has been a promising method for low-cost and large-scale production of high quality CIGS film. However, there is the problem that most Ga in the CIGS film segregates near the Mo back contact. So the solar cell behaves like a $CuInSe_2$ and lacks the increased open-circuit voltage. In this study we investigated the Ga distribution in CIGS films by using the $Ga_2Se_3$ layer. The $Ga_2Se_3$ layer was applied on the Cu-In-Ga metal layer to increase Ga content at the surface of CIGS films and to restrict Ga diffusion to the CIGS/Mo interface with Ga and Se bonding. The layer made by thermal evaporation was showed to an amorphous $Ga_2Se_3$ layer in the result of AES depth profile, XPS and XRD measurement. As the thickness of $Ga_2Se_3$ layer increased, a small-grained CIGS film was developed and phase seperation was showed using SEM and XRD respectively. Ga distributions in CIGS films were investigated by means of AES depth profile. As a result, the [Ga]/[In+Ga] ratio was 0.2 at the surface and 0.5 near the CIGS/Mo interface when the $Ga_2Se_3$ thickness was 220 nm, suggesting that the $Ga_2Se_3$ layer on the top of metal layer is one of the possible methods for Ga redistribution and open circuit voltage increase.

• Journal of Korea Multimedia Society
• /
• v.23 no.5
• /
• pp.700-709
• /
• 2020

With the development of virtual reality (VR)-related technology and the advent of the 5G era, VR-based streaming games or content have been developed and transmitted at high speed. Although VR technology is also being applied in education, health care, manufacturing, and production fields, its main application is for entertainment. VR technology has been developed based on hardware and various contents have been developed accordingly; however, the number of VR content with high entertainment value is insufficient, and there are primarily hands-on contents. In this paper, we propose a method for developing an writing tool that can enhance the productivity in the development and editing of VR content and create VR contents based on a timeline by reflecting the storytelling rather than by a simple empirical type to solve the bias in content style. The proposed VR content writing tool is expected to increase the productivity in VR content development and contribute to the creation of various styles of content. Its implementation can enable developers to create specific stories in a timeline and support several animation effects.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.383-393
• /
• 2006

This paper investigates strength characteristics and stress-strain behaviors of geogrid mixing reinforced lightweight soil. The lightweight soil was reinforced with geogrid in order to increase its compressive strength. Test specimens were fabricated by various mixing conditions including cement content, initial water content, air content and geogrid layer and then unconfined compression tests were carried out. From the experimental results, it was found that unconfined compressive strength as well as stress-strain behavior of lightweight soil were strongly influenced by mixing conditions. The more cement content that is added to the mixture, the greater its unconfined compressive strength. However, the more initial water content or the more air foam content, the less its unconfined compressive strength. It was observed that the strength of geogrid reinforced lightweight soil was increased due to reinforcing effect by the geogrid for most cases except cement content less than 20%. In reinforced lightweight soil, secant modulus $(E_{50})$ was increased as the strength increased due to the inclusion of geogrid.

• Natural Product Sciences
• /
• v.10 no.1
• /
• pp.16-19
• /
• 2004

Triphala churna is a widely used herbal formulation that contains equal proportion of dried fruit powder of Emblica officinalis, Terminalia chebula and Terminalia belirica. In the Indian system of medicine, it is used in cleaning wounds, urinary disorders, diabetes mellitus, leprosy, constipation, eyesight promotion, piles, and as a rejuvenator. In the present study, the methanolic extract of 5 commercial Triphala was evaluated for antioxidant activity by 1,1-diphenyl-2-picryl-hydrazyl free radical scavenging method, total phenolic content by Folin-Ciocalteu method and gallic acid equivalents (GAE) by high performance thin layer chromatographic (HPTLC) method. All extracts exhibited antioxidant activity significantly. The $IC_{50}$ of the extracts ranged between $7.16\;to\;12.96\;{\mu}g/ml$. The total phenolic content of the extracts was found to be 195.3-296.4 mg of GAE/gm of GAE/gm dw. The HPTLC chromatographic data reveal that the content of GAE present in the extract was found to be $7.17-4.11\;{\mu}g/ml$. The study reveals that out of the churnas analysed, C was found to exhibit the most potent antioxidant activity. A clear correlation between $IC_{50}$ and content of GAE nor the total phenolic content could be observed. The study reveals that the consumption of Triphala would exert several beneficial effects by virtue of its antioxidant activity.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.153-163
• /
• 2020

Mineral and geochemical analysis were conducted on two sections (~3.5 m) of red-brown claysilt sediments covering the gneiss and granite weathering zones in Suwon-si for establishing Quaternary paleoenvironmental changes in Korea. The sections were divided into four sedimentary layers (Unit 1-4) by vertical changes in mineral composition and chemical composition. The lowermost unit 1 was a sandy sediment with a high K-feldspar content with a significant contribution of weathered bedrock. Unit 2 was a transition layer showing intermediate characteristics. Unit 3 was a reddish brown clay-silt sediment, with a total clay content of 58% on average, and the main clay minerals were illite-smectite mixed layer minerals and hydroxy-interlayered vermiculite/smectite. Unit 3 contained almost no plagioclase, while the content of kaolin minerals derived by the plagioclase weathering was higher than in the other layers. Unit 4 had similar mineral composition and chemical properties to Unit 3, but had a higher content of plagioclase and chlorite and lower content of kaolin minerals. The chemical compositions of the sections were compared with those in other regions of Korea, suggesting the eolian origin of Units 3 and 4. The paleoenvironmental change in the sedimentary section of this region was interpreted as follows. Weathered products of gneiss and granite, which are bedrocks of this region, were eroded and deposited as sandy sediments in the periphery to form the lower layers (Unit 1, 2), followed by the deposition of the claysilty rich eolian sediments (Unit 3) during the glacial. Unit 3 was chemically weathered during the warm humid climate during the last interglacial, developing a reddish brown color. After that, a eolian sediment layer (Unit 4) was deposited during the last glacial.

• 한국해양학회지
• /
• v.26 no.3
• /
• pp.193-203
• /
• 1991

KODOS (Korea Deep ocean Study)-89 sediments, recovered from western part of Clarion-Clipperton fracture zone in north Pacific, show two distinctly colored layer zones: surface yellow brown layer (unit A) and subsurface dark brown layer (unit B), and roughly recognized as Quaternary and Tertiary in age, respectively. Geochemical characteristics are also different in those two units. Smectite, water, micronodule, and heavy metal contents are higher in unit B, while POC content is higher in unit A. High smectite and low POC contents in unit B are due to the longer formation period of smectite, almost decomposition of labile organic matter in unit B relative to unit A. High water content in unit B is caused by coarse fabric which results from higher content of spicules and spines. Additionally, stronger electrostatic repulsion force caused by high smectite content also supports high water content in unit B relative to unit A. Variations in heavy metal contents are closely related to the amount of micronodule, which has higher metal contents than that of sediment. Therefore, we conclude that the differences of geochemical characteristics in unit A and unit B are resulted from the different diagenetic durations of unit A and unit B.