• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.334-346
• /
• 2022

The manufacturing technique was studied through the structure and material characteristics of the walls and the painting layers of the Avalokitesvara Bodhisattva mural of Geungnakjeon Hall, Daewonsa Temple. The mural is painted and connected to the earthen wall and the Junggit, and the wall is composed of wooden laths as a frame, the first and middle layers, the finishing layer, and the painting layer. The first layer, middle layer, and finishing layer constituting the wall were made by mixing weathered soil and sand. It was confirmed that the first layer had a high content of loess below silt, and the finishing layer had a high content of fine-sand and very fine sand. For the painting layer, a ground layer was prepared using soil-based mineral pigments, and lead white, white clay, atacamite, minium, and cinnabar (or vermilion) pigments were used on top of it. The Avalokitesvara Bodhisattva mural was confirmed to belong to a category similar to the soil-made buddhist mural paintings of Joseon Dynasty. However, it shows characteristics such as a high content of fine sand in the finishing layer and overlapping over other colors. Such material and structural characteristics can constitute important information for future mural conservation status diagnoses and conservation treatment plans.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1115-1126
• /
• 2003

In this paper, we propose modeling method for video data that represents structural and semantic contents of video data efficiently. Also, a browsing method that helps users easily understand and play the contents of video data is presented. The proposed modeling scheme consists of three layers such as raw data layer, content layer and key frame layer The content layer represents logical hierarchy and semantic contents of video data. We implement two kinds of browsers for playing video data and providing video contents. The playing browser plays video data and Presents the information of currently playing shot. The content browser allows users to browse raw data, structural information and semantic contents of video data.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.1
• /
• pp.19-27
• /
• 1983

This paper deals with hardness and wear characteristics of ion-nitrided metal, and with ion-nitride processing which is concerned with the effects of added carbon content in gas atmosphere. A small optimal amount of carbon content in gas atmosphere increase compound layer thickness, as well as to increase diffusion layer thickness and hardness, and reduces wear rate when the applied wear load is small. It is found in the analysis that under small applied wear load, the critical depth where voids and cracks may be created and propagated is located at the compound layer, so that the abrasive wear where hardness is an important factor, is created and the existence of compound layer reduces the amount of wear. When the load becomes large, the critical depth is located below nucleation and propagation, is created and the existence of compound layer increase wear rate.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.83-92
• /
• 2011

A inorganic powder EL lamp was made by screen printing technique with phosphor ink and dielectric ink. The thickness change of a phosphor ink layer and a dielectric ink layer were not influenced on dielectric content, but rely on phosphor size and vehicle. Once finishing screen printing technique with phosphor ink and dielectric ink, and its surface has been printed again before not drying of phosphor ink and dielectric ink. Then phosphor ink and dielectric ink were not transferred. The electric capacity of inorganic powder EL lamp was more influenced on dielectric content than the thickness of dielectric ink layer, and it was more dependent on the thickness of phosphor ink layer than the thickness of dielectric ink layer.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.35-46
• /
• 1982

This paper deals with residual stress characteristics of ion-nitrided metal which is primarilly concerned with the effects of added carbon content in gas atmosphere. A small optimal amount of carbon content in gas atmosphere increase compound layer thickness, as well as to increase diffusion layer thickness and hardness. The residual stress and deflection of the specimens was measured in various elevated temperature at the surface of ion-nitrided metal and the internal stress distribution was calculated. It is found that compressive residual stress at the compound layer is largest at the compound layer, and decreases as the depth from the surface increases.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.4
• /
• pp.64-72
• /
• 1993

Mechanical properties of 15 mm thick, three-layer particleboard were studied by varying resin content, specific gravity, mat moisture content, pressing time and pressing temperature. Based on the results of the study, Multiple regression models were developed to estimate the mechanical properties of three-layer particleboard. The results of this study showed the mechanical properties of particleboard were highly related with resin content. specific gravity and mat moisture content in decending order. The mechanical properties were able to estimated as the linear function of resin content and specific gravity. However, the effects of change in mat moisture content on the mechanical properties showed a non-linear pattern. The mechanical properties curves over mat moisture content reached peaks at 15 %, and then decreased at 18 % and 21 % of mat moisture contents. On the other hand, the effects of pressing time and pressing temperature on the mechanical properties of particleboard were not significant.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.53-58
• /
• 2001

Constructions on the soft clay layer of low strength and high compression bring out many problems. Recent studies show that strength of the soft clay layer could be substantially improved by mixing quicklime. For the purpose, a series of uniaxial compression tests were performed, using quicklime, in order to analyze strength characteristics. The major test results are summarized following : When water content is 90%, the strength is observed to precipitously increase between 3～14 days, then, the extent slowly increase in relative terms. When water content is 130%, the strength is observed to precipitously increase up to 28 days. When the strength of water content 90% is compared to that of water content 130%, the initial strength of the former is higher than that of the latter. The analyses show that the improvement of soft clay layers can be realized by the mixture of both quicklime and sand, and by the mixture of quicklime only.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.1 no.1
• /
• pp.9-17
• /
• 1974

The purpose of this study was to clarify the relationship between dental caries status, and the content of fluoride in drinking water, and the content of fluoride in enamel of deciduous teeth of Korean children. The specific areas selected in this study were Asan-Kun and Seouchon-Kun (Chung Cheoung Nam-Do) where the fluoride content in the deep well water were 0.9 ppm and 0.4 ppm respectively. The dental caries status of 720 children aged 6 to 11 who have been lived since birth was detected. The following results were obtained upon this study: 1. The def person rate, deft rate and def index of the Asan-Kun children were revealed 46.11%, 14.41% and 1. 69 respectively. The fluoride content in the outer layer of enamel was 430 ppm. 2. The def person rate, deft rate and def index of the Seouchon-Kun children were revealed 59.17%, 20.97% and 2.40 respectively. The fluoride content in the outer layer of enamel was 391 ppm. 3. The def person rate, deft rate and def index of the Asan-Kun children were showed lower value than the Seouchon-Kun children. The fluoride content of the outer layer of enamel of the Asna-Kun children were showed higher value than the Seouchon-Kun children.

• Geomechanics and Engineering
• /
• v.18 no.1
• /
• pp.97-109
• /
• 2019

Physical conditions play vital role on the mechanical properties of frozen soil, especially for the temperature and moisture content of frozen soil. Subsequently, they influence the subsidence and stress law of permafrost layer. Taking Jiangcang No. 1 Coal Mine as engineering background, combined with laboratory experiment, field measurements and empirical formula to obtain the mechanical parameters of frozen soil, the thick plate mechanical model of permafrost was established to evaluate the safety of permafrost roof. At the same time, $FLAC^{3D}$ was used to study the influence of temperature and moisture content on the deformation and stress law of frozen soil layer. The results show that the failure tensile stress of frozen soil is larger than the maximum tensile stress of permafrost roof occurring in the process of mining. It indicates that the permafrost roof cannot collapse under the conditions of moisture content in the range from 20% to 27% as well as temperature in the range from $-35^{\circ}C$ to $-15^{\circ}C$. Moreover, the maximum subsidence of the upper and lower boundary of the overlying permafrost layer decreases with the increase of moisture content in the range of 15% to 27% or the decrease of temperature in the range of $-35^{\circ}C$ to $-15^{\circ}C$ if the temperature or moisture content keeps consistent with $-25^{\circ}C$ or 20%, respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.5
• /
• pp.260-266
• /
• 2003

In order to study the interfacial reaction between Nb thin sheet and Fe-C-(Si) alloy with different Chemical compositions, they were cast-bonded. The growth of carbide layer formed at the interface after isothermal heat treatment at 1173K, 1223K, 1273K and 1323K for various times was investigated. The carbide formed at the interface was NbC and the thickness of NbC layer was increased linearly in proportional to the heat treating time. Therefore, It was found that the growth of NbC layer was controlled by the interfacial reaction. The growth rate constant of NbC layer was slightly increased with increase of carbon content when the silicon content is similar in the cast irons. However, as silicon content increases with no great difference in carbon content, the growth of NbC layer was greatly retarded. The calculated activation energy for the growth of NbC layer was varied in the range of 447.4~549.3 kJ/moI with the compositions of cast irons.