• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.5
• /
• pp.423-428
• /
• 2004

Soybean seeds contain high amounts of isoflavones that display biological effects and isoflavone content of soybean seed can vary by year, environment, and genotype. Objective of this study was to identify quantitative trait loci that underlie isoflavone content in soybean seeds. The study involved 85 $F_2$ populations derived from Korean soybean cultivar 'Kwangkyo' and wild type soybean 'IT182305' for QTL analysis associated with isoflavone content. Isoflavone content of seeds was determined by HPLC. The genetic map of 33 linkage groups with 207 markers was constructed. The linkage map spanned 2,607.5 cM across all 33 linkage groups. The average linkage distance between pair of markers among all linkage groups was 12.6 cM in Kosambi map units. Isoflavone content in $F_2$ generations varied in a fashion that suggested a continuous, polygenic inheritance. Eleven markers (4 RAPD, 3 SSR, 4 AFLP) were significantly associated with isoflavone content. Only two markers, Satt419 and CTCGAG3 had F-tests that were significant at P<0.01 in $F_2$ generation for isoflavone content. Interval mapping using the $F_2$ data revealed only two putative QTLs for isoflavone content. The peak QTL region on linkage group 3, which was near OPAG03c, explained $14\%$ variation for isoflavone content. The peak QTL region on linkage group 5, which was located near OPN14 accounted for $35.3\%$ variation for isoflavone content. Using both Map-Maker-QTL $(LOD{\geq}2.0)$ and single-factor analysis $(P{\leq}0.05)$, one marker, CTCGAG3 in linkage group 3 was associated with QTLs for isoflavone content. This information would then be used in identification of QTLs for isoflavone content with precision

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.27-33
• /
• 2014

As UCI (Universal Content Identifier) identification system becomes a national standard for content distribution, many digital contents are distributed through UCI identification system. However, problems associated with copyright infringement and copyright contracts occur due to lack of copyright information. ICN (Integrated Copyright Number), a code system developed for copyright management, includes copyright-related information for the purposes of usage settlement and accounting, illegal usage monitoring, and content filtering. ICN, however, has no information about distribution and content properties. Therefore, the linkage and integration between UCI and ICN can be a basis for the transparent and effective distribution of digital contents. In this paper, we propose a model for linking and integrating UCI and ICN, developing the efficiency in the value chain of each identified system by analyzing political factors and key technical elements between the two identification systems.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.151-168
• /
• 2014

UCI (Universal Content Identifier) as a national digital content identification system for identifying digital content and ICN (Integrated Copyright Number) for copyright management are operated by Korea copyright commission. However, They are not interoperable with international standard identification system such as ISRC (International Standard Recording Code), ISWC (International Standard Works Code), and ISAN (International Standard Audiovisual Number) due to lack of linkage system. Hence, extra works with international standard identification system are needed for international market entry and integrated management of statistical information including content settlement in international market is impossible. In this paper, the domestic/international identification systems are surveyed, and by metadata analysis of identification systems, linkage method with UCI/ICN is proposed. And also by developing the prototype model, research direction to UCI/ICN with international standard identification system is proposed.

• International Journal of Knowledge Content Development & Technology
• /
• v.13 no.1
• /
• pp.111-130
• /
• 2023

There are the national science and technology standard classification system used in Korea, the classification according to the standard classification system for educational organization units, and the Korean standard education classification by the National Statistical Office. It is not suitable for calculation or evaluation, and classification is still mixed depending on the purpose of use. Therefore, in this study, the current status of academic standard classification, issues related to the standard classification system such as research foundation associations and research institutes, and issues related to the academic standard classification through the analysis of existing prior research issues, etc. As a result of the research, first, it is necessary to maintain and strengthen the linkage of the academic classification system, such as maintaining the linkage between the relevant departmental classification systems and strengthening the linkage with the relevant classification system, as a result of analysis of major issues in the academic standard classification system, and the systematic improvement cycle of the revision process and management system and settings are required.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2002

For the preparation of high resilience polyurethane (PU) foams with polyether type cell openers which have different ethylene oxide (EO) content, molecular weight and chain structure, the influences of tell opener structure on the kinetics, rheology, structural stability, open cell content and mechanical properties of the obtained foam were investigated. It was observed that urea formation reaction was delayed with the increase of EO content and incorporation of ester linkage in cell opener molecule and was relatively independent on the molecular weight. With the rheological studies, the decreases of viscosity and storage modulus were confirmed for the increase of EO content and molecular weight, so that the resulted foam had low structural stability and high open cell content. The cell opener having ester linkage in molecule exhibited the lowest values of viscosity and storage modulus and the obtained foam has high open cell content. However, the structural stability increased due to the larger intermolecular interaction of ester linkage. The hardness, tensile strength, tear strength and elongation of foam were deteriorated with increase of EO content and molecular weight of tell opener. On the other hand, the cell opener having ester linkage in molecule improved the values of tensile strength, tear strength and elongation.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.791-792
• /
• 2006

In motor design, an important factor is the content of silicon in coss material, which can effect the saturation of magnetic circuit and coss loss. While the content of silicon is high, the core loss will be reduced. At the same time, in order to assure the effective flux, the magnetizing current must be increased and then the copper loss becomes higher. Therefore the material with high content of silicon, which is used in the motor, can not always give the high efficiency. In this paper flux linkage of two different material s10 and s60 is compared according to the operating region and then exciting current to obtain same flux is estimated. By comparing core loss and copper loss between two material with the estimated current and flux linkage, this paper presents a criterion in determining the material for higher efficiency

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.600-605
• /
• 1999

Methyl linoleate was oxidized at 60, 90, 120 and $150^{\circ}C$, respectively, with sparging oxygen for different periods of time. On the basis of the peroxide values determined at four temperatures, four heating times were chosen for the analysis of physicochemical parameters, such as peroxide value, total oxidation products, polymer content, viscosity, refractive index and characteristics of thermal degradation by DSC (Differential Scanning Calorimeter). The content of peroxide linkage (C-O-O-C) polymer and ether or carbon to carbon linkage (C-O-C/C-C) polymer were analyzed by High Performance Size Exclusion Chromatography (HPSEC). The polymer formed at four temperatures was qualitatively identified as dimer. The polymer with peroxide linkage (C-O-O-C) were detected from methyl linoleate oxidized at $60^{\circ}C\;and\;90^{\circ}C$, but they were not detected from methyl linoleate oxidized at $120^{\circ}C\;and\;150^{\circ}C$. The enthalpy changes increased as peroxide value increased whereas maximum degradation temperature decreased. The highest correlation coefficients were obtained between maximum degradation temperature $(T_m)$, exothermic enthalpy changes and peroxide value, peroxide linkage (C-O-O-C) polymer content.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.1
• /
• pp.58-62
• /
• 2019

Objective: The oxidized low density lipoprotein receptor 1 (OLR1) gene plays an important role in the degradation of oxidized low-density lipoprotein and adipocyte proliferation in mammals. For this reason, we aimed at investigating the association of OLR1 gene polymorphisms with carcass quality traits in Chinese Qinchuan cattle. Methods: The single nucleotide polymorphism (SNP) was identified in the 3' untranslated region of bovine OLR1 gene by DNA sequencing. In addition, the haplotype frequency and linkage disequilibrium estimates of three SNPs were evaluated in 520 individuals. Results: Results indicated that the studied three SNPs were within the range of moderate genetic diversity (0.25< polymorphism information content<0.5). Haplotype analysis of three SNPs showed that ten different haplotypes were identified, but only five haplotypes were listed as those with a frequency of <0.05 were excluded. The Hap3 ($-G_1T_2C_3-$) had the highest haplotype frequency (42.10%). Linkage disequilibrium analysis showed that the three SNPs had a low linkage ($r^2<0.001$). The T10588C and C10647T were significantly associated with backfat thickness and intramuscular fat content in Qinchuan cattle. Conclusion: Based on our results, we believe that the OLR1 gene could be a strong candidate gene for influencing carcass quality traits in Qinchuan cattle.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.148-148
• /
• 2017

Soybean is an important economical resource of protein and oil for human and animals. The genetic basis of seed protein and oil content has been separately characterized in soybean. However, the genetic relationship between seed protein and oil content remains to be elucidated. In this study, we used a combined analysis of phenotypic correlation and linkage mapping to dissect the relationship between seed protein and oil content. A $F_{10:11}$ RIL population containing 222 lines, derived from the cross between two Korean soybean cultivars Seadanbaek as female and Neulchan as male parent, were used in this experiment. Soybean seed analyzed were harvested in three different experimental environments. A genetic linkage map was constructed with 180K SoyaSNP Chip and QTLs of both traits were analyzed using the software QTL IciMapping. QTL analyses for seed protein and oil content were conducted by composite interval mapping across a genome wide genetic map. This study detected four major QTL for oil content located in chromosome 10, 13, 15 and 16 that explained 13.2-19.8% of the phenotypic variation. In addition, 3 major QTL for protein content were detected in chromosome 10, 11 and 16 that explained 40.8~53.2% of the phenotypic variation. A major QTLs was found to be associated with both seed protein and oil content. A major QTL were mapped to soybean chromosomes 16, which were designated qHPO16. These loci have not been previously reported. Our results reveal a signi cant genetic relationship between seed protein and oil fi content traits. The markers linked closely to these major QTLs may be used for selection of soybean varieties with improved seed protein and oil content.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.2
• /
• pp.67-76
• /
• 2001

The "crescent-egg" a new spontaneous mutant was detected in a white egg strain k37. Studies were carried out the linkage analysis, to investigate phenotypic characteristics and biochemical analysis of haemolymph and ovarian protein. The mutant, ore was independent from 20 linkage groups P(2), Ze(3),L(4), oc(5), sn8), Ia(9), w-1(10), K(11), ch(13), U(14), bl(15), cts(16), bts(17), mln(18), nb(19), oh(20),Lan(21), or(22), tub(23) and Xan(27). The fertilization, hatchability and larval growth were not different from the those of normal eggs. The content and composition of yolk protein were similared to normal eggs. Scanning electron microscopy revealed the areal specific structure in dorsal region of egg-shell of cre mutant. Analysis of chorion protein by isoelectrofocusing(IEF), was resolved no difference in the composite of the chorion protein. We conclude that the egg mutant ere is expressed only in the egg-shape formation and region specific determination.