• Applied Microscopy
• /
• 제39권1호
• /
• pp.73-77
• /
• 2009

Contaminative artifacts such as carbonaceous materials on carbon-coated microgrids are unavoidable, which is induced by electron beam exposure inside electron microscopes. This phenomenon raise a source to produce confusing information to the samples investigated by analytical TEM, which should be alleviated as much as possible. As experimental precautions for reducing this unwanted effect, the use of $LN_2$ cooled anti-contaminator and pre-illumination of electron beam at low magnification can be helpful. Nevertheless, we should be cautious to set an illumination condition for microanalysis because the contaminative effect is dependent with the types of irradiation situations, which is well known to be a decisive factor for causing the carbonaceous artifacts. Accordingly, it is necessary that optimal illumination to minimize the contaminative effect should be selected for improving the accuracy of microanalysis. In this paper, we introduce the practical method to determine the optimal illumination condition by evaluating the contaminative effect as a function of instrumental spot size, which is directly linked with electron current density.

• 한국축산시설환경학회지
• /
• 제3권2호
• /
• pp.133-143
• /
• 1997

Optimal conditions for collecting, storing and drying temperature to utilize slaughter porcine blood for blood meals and the effects of blood meal on growth in broiler chicks were investigated. Dry matter and protein contents of slaughter procine blood were 19.5% and 77%(dry basis), respectively. As for the composites of amino acids in the blood, aspartic acid, arginine, glycine, histidine, leucine, lysine, phenylalanin threonine were shown high. There was no significant difference between the collections by bloodletting and vacuumming in terms of microbial contamination. Storage of slaughter porcine blood showed no differences in protein, DNA and triglyceride contents and pH between the storage methods of freezing (-20$^{\circ}C$) and refrigerating (-4$^{\circ}C$). In case of room temperature storage, however, the decrease in pH and the appearance of new protein due to microbial contaminations increased as the storage periods were prolonged. When drying was done by flash methods, the drying period got shortened as the temperature became higher, yet protein and triglyceride were destoryed more. When drying was done over 120$^{\circ}C$, even at the same degree, the breakdowns of protein and triglyceride increased more as drying period got longer. In feeding trials of broiler chicks, dietary supplementation of the flash dried blood meal at 2% level showed significant difference in growth rate(P＜.05%). These results indicated that the appropriate handling and manufacturing of slaughter porcine blood enabled the blood to be used as a protein source for broiler chicks.

• 반도체디스플레이기술학회지
• /
• 제10권1호
• /
• pp.1-6
• /
• 2011

In this paper, the air flow induced by the rotating flat disk is numerically investigated in a hope to better understand the air flow structures inside the wax spin coater for a silicon wafer polishing station. Due to the complex inner geometry of actual spin coater such as the casing around the rotating ceramic block and servo motor, recirculation of air flow is inevitably found on the coating target if the internal space of spin coater is closed at the bottom and it could be the possible source of contamination on the wax coating. By numerical flow simulation, we found that it is necessary to install the air vent at the bottom and to apply the sufficient air suction in order to control the path of air flow and to eliminate the air recirculation zone above the spinning surface of coating target.

• 해양환경안전학회지
• /
• 제14권3호
• /
• pp.205-210
• /
• 2008

화석연료 사용으로 인한 환경오염 및 에너지원가 상승이 큰 문제로 대두되고 있는 현재의 상황을 타개하기 위한 하나의 방안으로 신 재생에너지에 대한 관심이 고조되고 있다. 특히 서해안에 위치하고 있는 새만금 지역은 광활한 면적과 서북서풍이라는 큰 장점을 가지고 있어 풍력발전의 적지로 예상된다. 본 연구는 이러한 예상을 뒷받침해 줄 수 있는 풍력자원을 조사한 것으로 군산지역의 평균풍속은 4 m/s 정도이며, 도서지방을 연계하는 해상풍력발전 단지의 최적지로 손색이 없음을 밝혔다. 또한, 풍력자원의 출현밀도를 판별하는 Weibull의 분포함수를 이용하여 계산하고, 형상계수를 매개변수로 하여 풍속밀도계산을 한 결과, 군산지방의 풍속출현을 예상할 수 있었다.

• Mycobiology
• /
• 제35권2호
• /
• pp.100-102
• /
• 2007

Pet dogs have been considered to be involved in the contamination of indoor air by serving as a source of providing molds at houses. Currently, information on the molds originated from pet dogs is rarely available in Korea. The present study was carried out to obtain basic information on the fungi present on pet dogs. For this, fungal isolation was performed to the skin and hairs of 70 pet dogs at different houses and veterinary hospitals. A total of 44 fungal isolates were obtained from skin (27 isolates) and hairs (17 isolates) of the dogs investigated. Based on the observation of microstructures and colony morphology, and the ITS rDNA sequence analysis, the fungal isolates were identified at the level of genus. The identified isolates belong to the genera of Alternaria, Aspergillus, Beauveria, Chrysosporium, Cladosporium, Penicillium, Scopulariopsis, and Trichoderma. Among these genera, Aspergillus (25%), Cladosporium (23%) and Penicillium (20.5%) were 3 major genera. 63% of the 44 isolates showed color changes on dermatophyte test medium (DTM). When we tested the growth ability of 44 isolates at $37^{\circ}C$, 45% of the isolates were able to grow. These results show that pet dogs could carry fungi having a potentiality of affecting on human health.

• 반도체디스플레이기술학회지
• /
• 제8권1호
• /
• pp.1-5
• /
• 2009

Typically, single-wafer wet etching is done by dispensing chemical onto the front and back side of spin wafer. The wafer is fixed by a number of chuck pins, which obstruct the chemical flow and would result in the incomplete removal of the remaining film, which can become a source of contamination in the next process. In this paper, we introduce a novel design of wafer chuck, in which chuck pins are groupped into two and each group of pins fixes the substrate alternatively. Two groups of chuck pins fix the high-speed spin substrate with non contact method using a magnetic material. The actual process has been executed to observe the effectiveness of this new wafer chuck. It was found that the new wafer chuck performed better than the conventional wafer chuck for removing the remaining film from the bevel and edge side of substrate.

• Preventive Nutrition and Food Science
• /
• 제17권2호
• /
• pp.172-176
• /
• 2012

Doenjang is a traditional Korean fermented soybean product that provides a major source of protein. In this study, a total of 18 different home-made doenjang samples were examined for the presence of foodborne pathogens and the total aflatoxin levels. Using an enzyme-linked immunosorbent assay to assess microbial quality and potential public health risk, we showed that total coliform levels in the doenjang samples ranged from 0 to $4.43{\pm}2.32{\times}10^6\;CFU/g$, and the maximum limit of Bacillus cereus was $4.67{\pm}2.0{\times}10^5\;CFU/g$. However, other foodborne pathogens, such as Staphylococcus aureus, Escherichia coli O157:H7 and Salmonella spp., were not detected among the tested samples. One of the samples (S3) showed a maximum limit of $42.2{\pm}9.1\;{\mu}g/kg$ for aflatoxin levels, which was above the safety limit allowed by the Codex Alimentarius Commission (CAC) regulatory agency. Further research is necessary to determine whether and how doenjang safety can be improved via elimination/reduction of microbial contamination during fermentation and storage or using microbial starter cultures for its fermentation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권6호
• /
• pp.18-31
• /
• 2013

This study was performed to examine use of the pump-and-treat method for remediation of TCE, CF and CT in groundwater contaminated by DNAPL. The Woosan industrial complex is located in Wonju, about 120 km east of Seoul, Korea. Two pumping wells (KDPW7 and KDPW8) and five monitoring wells (KDMW7, KDMW8, KDMW9, KDMW10, and SKW2) were installed for the test. An asphalt laboratory is a main source of the extensive subsurface contamination at this site. To evaluate change in the concentrations of TCE, CF, and CT in groundwater in the study area, three rounds of pump-and-treat pilot tests were performed (6 July to 6 August, 22 August to 6 September, and 19 September to 2 December in 2011). The groundwater levels and the concentrations of TCE, CF, and CT exhibited negative correlations in the wet season but positive correlations in the dry season, which suggests that the TCE concentrations were mainly controlled by dilution through rainfall during the wet season and by residual TCE, CF, and CT in the unsaturated zone during the dry season. These possibilities should be considered in the full-scale remediation plan.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.801-805
• /
• 2018

In this study, an underwater radiation detector was built using a GAGG(Ce) scintillator and silicon photomultiplier to establish an underwater radiation exposure monitoring system. The GAGG(Ce) scintillator is suitable for small radiation detectors as it strongly absorbs gamma rays and has a high light emission rate with no deliquescent properties. Additionally, the silicon photomultiplier is a light sensor with characteristics such as small size and low applied voltage. Further, a program and mobile app were developed to monitor the radiation coefficient values generated from the detector. According to the results of the evaluation of the characteristics of the underwater radiation monitoring system, when tested for its responsiveness to radiation intensity and reactivity, the system exhibited a coefficient of determination of at least 0.99 with respect to the radiation source distance. Additionally, when tested for its underwater environmental temperature dependence, the monitoring system exhibited an increase in the count rate up to a certain temperature because of the increasing dark current and a decrease in the count rate because of decreasing overvoltage. Extended studies based on the results of this study are expected to greatly contribute to immediate and continuing evaluation of the degree of radioactive contamination in underwater environments.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.355-362
• /
• 2015

There has been an increase of using Bosch Process to fabricate MEMS Device, TSV, Power chip for straight etching profile. Essentially, the interest of TSV technology is rapidly floated, accordingly the demand of Bosch Process is able to hold the prominent position for straight etching of Si or another wafers. Recently, the process to prevent under etching or over etching using EPD equipment is widely used for improvement of mechanical, electrical properties of devices. As an EPD device, the OES is widely used to find accurate end point of etching. However, it is difficult to maintain the light source from view port of chamber because of contamination caused by ion conflict and byproducts in the chamber. In this study, we adapted the SPOES to avoid lose of signal and detect less open ratio under 1 %. We use 12inch Si wafer and execute the through etching 500um of thickness. Furthermore, to get the clear EPD data, we developed an algorithm to only receive the etching part without deposition part. The results showed possible to find End Point of under 1 % of open ratio etching process.