• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.86-90
• /
• 2001

Demand of good seakeeping perfomace is increasing for sea going vessels such as cruisers, naval ships and container ships. Especillay roll motion is one of major concerns in evaluation of seakeeping performance due to its large resonace motion. Since large roll resonance motion is mainly arised from inherent small damping. use of additional mechnism to provide roll damping can significantly reduce roll motion. In this paper, a reliable performace evaluation method of fin stabilizer, which is very useful for stabilizing roll motion of mid and high speed vessls, is described. Model test and time domain simulation methods are adopted for performance evaluation in which real operating situation of fin stabilizer can be exactly modelled. Model test and simulation results show good correlations between model test and simulation results.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.479-484
• /
• 2003

A non-contact 6D motion tracking system is proposed. The system consists of two color cameras, a color image grabber and a host computer, Motions of a floating vessel was measured by the constructed system. The instantaneous forces of the floating vessel are analyzed. The floating vessel was put on the water in a small water container in free conditions. The measured forces are reconstructed by the measurement results. The system can be used to non-contact measurements for 6D dynamic analysis of floating vessels.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.57-58
• /
• 2006

Pumps have been widely used for transporting fluid in most of the merchant ships. However, the present status of using pumps for marine vessels has not been studied. This paper is to classify and analyze pumps installed in many ships(LNGC, Oil Tanker, Bulk, Container, Training ship). Finally, Pumps installed in the training ships are compared with merchant ships about the present status of using pumps.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.153-160
• /
• 2018

A pressure vessel consists of an inner tank and the outer tank; the material of the inner tank is austenite stainless steel, and the outer tank is general carbon steel. As the storage amount increase, the size of the inner tank for LNG also increases, which eventually increases the weight of the LNG storage tank. The Cold Stretch method can transport and store the LNG in a larger amount than the conventional pressure container, and the weight of the pressure vessel can also be reduced at 50 70% due to the reduction of the thickness, which is excellent from an economic and energy consumption perspective. Although the Cold Stretch method has these advantages, the domestic situation has not developed any related legislation. In this study, the actual production of pressure vessels using the Cold Stretch method will be processed and the volume expansion after the Cold Stretch will be checked and compared with the mechanical properties.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.69-75
• /
• 2001

It is very important to secure the marine vessels during entire loading and off-loading operations. The environment influences on loading conditions. the western coastal area of Korea is characterized as a strong current due to a high tidal range. The tension of mooring lines varies as per the current and wave changing its magnitude during the day. A proper mooring arrangement and design of mooring line should be determined as per environment conditions. In this study, a 50,000 DWT container ship being moored is investigated numerically. The dynamic tension of mooring lines is estimated by MORA (Mooring Response Analysis) software. Environmental conditions of selected offshore terminal site are plugged as input data. The mooring line tensions are obtained for various wave frequencies per wave directions. The results demonstrate the change of tensions of lines and the allowable range of safe conditions in berthed mooring.

• Journal of Navigation and Port Research
• /
• v.33 no.2
• /
• pp.135-141
• /
• 2009

The circumstances surrounding world ports have changed rapidly and port competition to attract cargoes has been increasing fiercely. Specifically, deploying large container vessels resulted fewer port visits and strategic alliance among liner shipping companies. Recently, many studies have worked for improving port competitiveness. However, these studies were limited to evaluation of only port competitiveness and few studies suggested strategies for reinforcing port competitiveness. Although implications of these previous studies are practically available to build policies for port, there have been very few academic studies such as identifying port competitiveness and port selection with related attributes for reasonable evaluation and analysis. Therefore, this study aims to classify the existing studies, which dealt with port selection problem, based on basic structure that was suggested by Murphy (1992). Furthermore, the conceptual definition will be carried out by comparison analysis in terms of time of study, type of data and methodology and decision factor of each study.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.13-20
• /
• 1994

The effects of prebuckling on the buckling of laminated composite cylindrical shells are investigated. Both axial compression and lateral pressure are considered for laminated composite cylindrical shells with length to radius ratios usually associated with container vessels. The shell walls are made of a laminate with several symmetric ply orientations. The study was made using finite difference energy method, utilizing the nonlinear bifurcation branch with nonlinear prebuckling displacements. The results are compared to the buckling loads determined when prebuckling displacements are neglected.

• Journal of Navigation and Port Research
• /
• v.30 no.1 s.107
• /
• pp.9-15
• /
• 2006

At the adjacent sea area of Busan Central Wharf, a variety of vessels, such as middle-large passenger ships, small hugh speed crafts, container ships, cargo ships and working boats as well as small miscellaneous vessels are freely sailing comparatively without special rules and marine traffic control. In this research, we analyzed traffic stream and navigational characteristics cf main traffic route based on statistics and distribution of tracks by ship's type and tonnage cf the passing vessels after conducting marine traffic survey twice using exclusive software. We examined the traffic safety of the passing vessels by classifying the sea area by each function based on the analysis about this traffic situation, and analyzing the effect by designating 'Inner passage'. We also studied the plan for the effective rearrangement cf Central Wharf considering basically the traffic safety of arrival and departure in a point of view of navigators.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.103-109
• /
• 2005

At the adjacent sea area of Busan Central Wharf, a variety of vessels, such as middle-large passenger ships, small fast sailing ships, container ships, cargo ships and working ships as well as small miscellaneous vessels are freely sailing comparatively without special steering and sailing Rules and marine traffic control because exclusive wharfs in accord with their purpose and use have been arranged in each wharf. In this research, we analyzed traffic stream and navigational characteristics of main traffic route based on statistics and distribution of tracks by ship's type and tonnage of the passing vessels after conducting marine traffic survey twice using exclusive software by targeting the sea area during the period of time. We examined the traffic safety of the passing vessels by classifying the sea area by each function based on the analysis about this traffic situation, and analyzing the effect by designating 'Buknea passage'. We also studied the plan for the effective rearrangement of Central Wharf considering basically the traffic safety oif arrival and departure in a point if view of navigators.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.465-470
• /
• 2006

Nowadays, vessel's size is tending to bigger, Therefore port facilities are developed according to this trend, which has been shown in the competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. However there are the limited number of large containerships more specifically so 70% of the total ships calling at Busan Port are small and medium sized ships which are less than 20,000 ton As a result, it is necessary to consider the handling facilities of these ships which had been disregarded The big size of facilities increases handling cost bemuse of high investment so it is possible for small and medium sized ships to have disadvantages financially and avoid calling. In this paper, we estimate the propriety of utilization of crane and labor according to the size of vessels after analyzing time value cost, reflecting the size of vessels, size and number of crane and labor structure, and container handling cost value.