• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.68-69
• /
• 2023

Recently, decarbonization has been emphasized worldwide to cope with climate change, and carbon neutrality by 2050 has emerged as a global agenda. The domestic port authorities have been participating in the global agenda in line with the government regulations. Since 2010, when decarbonization has been regarded as an important assignment in ports, container terminal efficiency considering undesirable outputs such as Carbon dioxide has been analyzed. However, most previous studies measured carbon dioxide emissions according to the Tier 1 and it is a first time to analyze container terminal efficiency based on the Tier 3 presented in the IPCC guidelines. 17 domestic container terminal operators were considered as decision making units and DEA-SBM Model was used. Subsequently, Undesirable outputs model was conducted to calculate the environmental efficiency.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.27-33
• /
• 2024

Following the COVID-19 pandemic, congestion within container terminals has led to a significant increase in waiting time and turnaround time for external trucks, resulting in a severe inefficiency in gate-in and gate-out operations. In response, port authorities have implemented a Vehicle Booking System (VBS) for external trucks. It is currently in a pilot operation. However, due to issues such as information sharing among stakeholders and lukewarm participation from container transport entities, its improvement effects are not pronounced. Therefore, this study proposed a deep learning-based predictive model for external trucks turnaround time as a foundational dataset for addressing problems of waiting time for external trucks' turnaround time. We experimented with the presented predictive model using actual operational data from a container terminal, verifying its predictive accuracy by comparing it with real data. Results confirmed that the proposed predictive model exhibited a high level of accuracy in its predictions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.220-221
• /
• 2009

One of the important performance measure for productivity at container terminals is the working productivity in the quay. working scheduling of quay cranes (QCs) gives a significant impact on the quay working productivity. The recent managers of the terminals pay high interests in equipment investment and operation methods with a new concept in order to enhance the quay working productivity. The double cycle or dual cycle, which is a method to increase the quay productivity with no application of new equipment, but with the change of operations, has been received strong attention in academic research. The majority of studies until this time has been realized the quay work as the bottleneck and focused on those works. However, if the QCs do notver, it the Cs d-trotver,(CT) if t the Cs, there would be the pos ibilf tes that the effectiveness of them is decreasedveaused by the longer, if t the Cs. Thus, this paper, suggests the solutions on the con th scheduling for the dual cycle operation considering the YT.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.61-62
• /
• 2023

There have been cases where the number of port workers has temporarily decreased due to COVID-19. To prevent the spread of COVID-19, a number of workers were quarantined, resulting in bottlenecks and waiting throughout the port operation process, increasing the congestion of terminals. As a result, problems such as a decrease in terminal operation efficiency occurred. However, it is understood that congestion centered on unloading equipment inside the terminal is not clearly calculated. Terminal congestion is thought to be a key factor directly related to the operational efficiency of the terminal. The congestion calculation method generally used in various fields measures congestion based on image-based data. Due to the nature of the loading and unloading equipment that moves according to the quantitative loading plan, it is unreasonable to apply the existing congestion calculation method. Therefore, this study presented a method of calculating terminal congestion using equipment waiting time and turnaround time, and verified the statistical significance of the congestion calculated using data from Terminal A of Busan Port.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.297-302
• /
• 2004

This paper analyzed productivity of quay cranes on container terminal that have perpendicular yard layout block. In most existing container terminals, quay cranes of single trolley type are used to loading and unloading containers, but quay crane productivity of these type has many limitation about large size containership. For these reasons, recently quay cranes of various type that mn improve productivity are developed and as the representative example, dual trolley, double trolley, supertainer are developing. These cranes are realized that very high productivity bemuse their cycle time is short more than existent single trolley quay crane. Therefore, we analyzed productivity of these cranes that are realized by next generation crane alternatives and as result qf this research, mechaniml productivity by cycle time and net productivity by simulation were measured.

• Journal of Intelligence and Information Systems
• /
• v.12 no.3
• /
• pp.47-65
• /
• 2006

These days, the number of automated container terminals is increasing to encourage the productivity of the container terminal inside and outside of the country. So far, there have been a lot of researches on the operating one type of equipments in a container terminal. However, there is still room for further improvement as none of equipment works itself but cooperate each other to finish a job, which means synchronization among the equipments is necessary. Among lots of equipments in a terminal, this paper concerns with the operation of ATCs (Automated Transfer Crane) and YTs (Yard Truck). The purpose of this paper is to find the efficient heuristic methods for operating ATCs and YTs that can set up a schedule in a real time. Moreover, using simulation this paper shows the efficient stacking strategy to decide the location of containers to be put and the proper selection range of YTs.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.577-584
• /
• 2003

Container terminals are various in terms of layout, cargo handling systems and operational aspects resulting in difference in productivity and economic feasibility. Therefore, by evaluating different terminal types, more comprehensive understanding can be grasped. For this the paper aims at evaluating the three terminal types under operation, the conventional terminal, the unmaned terminal and the indented terminal, with respect to productivity and cost. Based on the results in connection with the situation of Korean container terminal operation, feasibility for each type is discussed with suggestion for the optimal type.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.75-91
• /
• 2010

The aim of this study is to analyze current level of knowledge management(KM) performance in major container terminals. To achieve this aim, the evaluation criteria and KM performance index from pervious research were adopted. and current levels of KM performance of four leading container terminal operators which is located in Busan port were measured. The results firstly showed that average of KM level of these terminal operators was 67.7. And also, from the results of data analysis, it revealed that the weak point of KM in Korean leading terminal operators is official system and programs such as incentive policies, learning programs, and IT support systems for organizational knowledge sharing and knowledge codification.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.229-234
• /
• 2017

Container terminal yards operate under a high degree of uncertainty as the contact point between inbound and outbound operations of vessels and external trucks. The layout, equipment operations. and job orders at the yards determine the efficacy and delays of the work, so many studies have investigated improvements in efficiency. H company, a container terminal operator developed an index called WDI to distribute work among RTGCs. The WDI is an indicator to prevent congestion in one place by equally distributing the work to each RTGC. This paper analyzes the effect of the WDI introduction and discusses the causes and results of the WDI introduction effect from quantitative and qualitative perspectives.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.25-40
• /
• 2019

Today, container terminals are fiercely competing to attract an increasing number of containers. As a way to improve terminal productivity, this study proposes two dispatching rules for yard truck allocation priorities. First, Multi-Attribute Dispatching Rule(MADR) is an allocation method to calculate the weighted sum of multiple factors affecting container terminal productivity and priority them. Especially, the workload of the quay crane was considered one of the factors to reduce the residence time of the ship. Second, Cycling Dispatching Rule(CDR) is the effective way to increase the number of double cycles that directly affect terminal productivity. To identify the effects of combinations of pooling and dispatching, a comparative experiments was performed on 8 scenarios that combined them. A simulation environment has been developed for experiments and the results have demonstrated that the combination of terminal level pooling and Multi-attribute Dispatching could be an excellent combination in KPIs consisting of GCR and delayed departure of ships, etc.