• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2174-2183
• /
• 2021

Helium cooled solid breeder blanket as an important blanket candidate of the Tokamak fusion reactor uses ceramic pebble bed for tritium breeding. Considering the poor effective thermal conductivity of the ceramic breeder pebble bed, thin structure of tritium breeder pebble bed is usually adopted in the blanket design. The container wall has a great influence on the thin pebble bed packing structure, especially for the assembly of mono-sized particles, and thin pebble bed will appear anisotropic effective thermal conductivity phenomenon. In this paper, thin ceramic pebble beds composed of 1 mm diameter Li₄SiO₄ particles are generated by the EDEM 2.7. The effective thermal conductivity of different thickness pebble beds in the three-dimensional directions are analyzed by three-dimensional thermal network method. It is observed that thin Li₄SiO₄ pebble bed showing anisotropic effective thermal conductivity under the practical design size. Normally, the effective thermal conductivity along the bed vertical direction is higher than the horizontal direction due to the gravity effect. As the thickness increases from 10 mm to 40 mm, the effective thermal conductivity of the pebble bed gradually increases.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.307-310
• /
• 2003

In the maritime container terminal, LMTT(Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV(Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 기술혁신연구
• /
• 제15권2호
• /
• pp.61-81
• /
• 2007

A typical small firm in consumer goods sectors of developing countries is an OEM supplier to big MNCs. Lacking design and marketing capability, a small firm relies on the MNCs for survival but their long term growth is not guaranteed as the MNCs are always looking for, and ready to relocate to, cheaper production sites. In this light, we can say that there is something like "OEM trap" from which most firms from LDCs find difficult to move out (Lee 2005). In this situation, one way for long term growth and catch-up is to make a transition to the OBM (own brand manufacturer). But, the transition is not easy or even risky. This paper analyzes the cases of three companies in Korea to find out common features in their successful transition to OBM. They are Aurora World (a flush toy maker), Hankook Chinaware (a chinaware maker), and Hanacobi (a plastic-made food container maker with the Lock-and-Lock brand). These firms can be commonly characterized by 1) arranging access to external knowledge base and steady increase of in-house R&D efforts and capabilities leading to acquisition of formal IPRs and their management, and 2) establishment of global production networks with factories in lower-income countries as well as their own independent global marketing network.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.389-394
• /
• 2005

In this study we carried out to evaluate the salinity concentration and volumetric water content of unsaturated soil column using frequency domain Reflectometry with vector network analyzer (FDR-V) measurement system. All of experiments were considered to the effect of temperature which ranges from l0$^{\circ}C$ to 50$^{\circ}C$ increasing the interval of l0$^{\circ}C$ controlled by the constant temperature container. From the results the responses of complex dielectric constant which consist of the real part and imaginary parts have the effect of volumetric water content and concentration of salinity at 1GHz. Use of derived equations (1) and (2) can be calculated the physical parameters such as volumetric water content and salinity concentration of unsaturated media by the responses of complex dielectric constant.

• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.169-181
• /
• 2014

Recently ships and ocean platforms are becoming increasingly technological, unmanned, and huge. Maintenance and safety monitoring of these products is very important for safety reasons. Therefore, real-time monitoring of safety regions, such as the engine room, and hull structure, and environmental states, like fire and pressure of LNG tanks, is required for the sustainable ships. In this paper, a ZigBee-based wireless sensor network is suggested to monitor ships and ocean platforms effectively. However, this causes some telecommunication problems because these products are made of steel. To resolve this problem, we use the mesh networking of Zig-Bee that can monitor the regions and environmental states consistently. The telecommunication of such a monitoring system is tested on a real container ship and its performance is verified. The real-time monitoring results are displayed on the users' smart devices.

• 한국항해학회지
• /
• 제17권2호
• /
• pp.57-73
• /
• 1993

Subject : The Practical Use of UN Standard Message for cargo flow EDI Writer : Park, Nam Kyu and Lee, Tae Woo It's necessary to prepare standard message which is agreed on among trading partners for EDI in container transport industry. Now KMPA is carrying out the EDI Project for establishing Korea Logistics Network. It is important to make standard message of documents using in transport industry to succesfully accomodate EDI. The objective of this study is to find out the method of UN standard message utility in Korea. For this study, the UN message guideline is primarily reviewed, and the process that Shipping Request being used in Hanjin Shipping Co. Ltd. is applied to UNSMs as case study. Generally the data format of EDIFACT is so complex and broad for inter-industry standard that the abstract of data format is usually used. Therefore, it is necessary to make the subset of standard message for Shipping Request in ocean industry. In the result of this study, that the ocean industry can use the subset of IFTMBF for Shipping Request is proved, and the subset is suggested. This thesis will contribute toward showing the practical way of standardrization of 350 documents using in trade, customs and transport sectors.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.143-149
• /
• 2004

최근 RFID 기술은 유비쿼터스 센서 네트워크 구현을 위한 중요기술로 급부상하고 있다. 본고에서는 RFID 기술, 표준화 동향 및 다양한 응용영역을 분석함으로써 해상분야의 전망있는 응용분야를 발굴하기 위한 조사목적에서 이루어 졌다. RFID 기술개요 및 요소기술, 국내외 표준화 동향 및 응용분야를 소개한 후 해상분야에서 RFID 활용방안을 소개하였다. 해상분야에서 주요 응용영역으로는 선용품 재고관리의 자동화, 컨테이너의 관리, 화물창 상태관리, 이동통신망을 이용한 연안선박의 관리방안'등을 들 수 있다. 결과적으로 기존의 이용가능한 유무선 통신망에 RFID시스템을 효과적으로 적용한다면 선박운항의 효율화, 해양안전 확보 및 해양환경 보호에도 많은 기여를 할 것이다.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.163-170
• /
• 2004

1960년도부터 컨테이너를 사용한 해상 물동량이 급격히 증가되어 부두에서 처리하여야할 컨테이너 양이 많이 증가되었다. 부두의 운용효율을 증가시키기 위하여 야드 크레인의 정확히 위치 검출이 상당히 중요한 과제이다. 본 논문에서는 엔코더 출력펄스와 적외선센서를 사용하여 정확하고 신속하게 크레인의 절대위치를 측정하는 기법을 제시하였다. 갠추리 바퀴에 직결된 엔코더 펄스를 카운팅하여 갠추리의 이동거리를 측정한 후, 바퀴의 슬립 통에 인하여 발생하는 측정오차를 보상하기 위하여 적외선센서를 사용하였다. 실제 크레인의 1/10 축소한 시뮬레이터로 실험을 수행하여 본 논문에서 제시한 기법의 타당성을 확인하였다.

• 해양환경안전학회지
• /
• 제11권1호
• /
• pp.39-45
• /
• 2005

최근 RFID 기술은 유비쿼터스 센서 네트워크 구현을 위한 중요기술로 급부상하고 있다. 본고에서는 RFID 기술, 표준화 동향 및 다양한 응용영역을 분석함으로써 해상분야의 전망있는 응용분야를 발굴하기 위한 조사목적에서 이루어 졌다. RFID 기술개요 및 요소기술, 국내외 표준화 동향 및 응용분야를 소개한 후 해상분야에서 RFID 활용방안을 소개하였다. 해상분야에서 주요 응용영역으로는 선용품 재고관리의 자동화, 컨테이너의 관리, 화물창 상태관리, 이동통신망을 이용한 연안선박의 관리방안 등을 들 수 있다. 결과적으로 기존의 이용가능한 유무선 통신망에 RFID시스템을 효과적으로 적용한다면 선박운항의 효율화, 해양안전 확보 및 해양환경 보호에도 많은 기여를 할 것이다.

• 한국통신학회논문지
• /
• 제30권2C호
• /
• pp.31-40
• /
• 2005

오류 역전파 알고리즘의 문제점과 ART 신경회로망의 문제점을 개선하기 위해 Jacobs가 제안한 delta-bar-delta 방법과 신경회로망을 결합한 자가 생성 지도 학습 알고리듬을 제안한다. 입력층과 은닉층에서는 ART-1과 ART-2 알고리듬을 이용하고, winner-take-all 방식은 완전 연결 구조이나 연결된 가중치만을 조정하도록 채택하였다. 실험을 위해 학생증, 주민등록증, 컨테이너의 영상으로 추출한 패턴을 신경회로망의 은닉층 노드에 대해 실험하였고, 실험결과 제안된 자기 생성 지도 학습알고리듬이 지역최소화, 학습 속도, 정체 현상이 기존의 방법보다 성능이 개선된 것을 확인하였다.