• Journal of Biosystems Engineering
• /
• v.29 no.6 s.107
• /
• pp.501-507
• /
• 2004

Fruits we subjected to complex dynamic stresses in the transportation environment. During a long journey from the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonant frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. The vibration characteristics of the pears in corrugated fiberboard container in transit were analyzed using FEM (finite element method) modeling, and the FEM modeling approach was first validated by comparing the results obtained from simulation and experiment for the pear in the frequency range 3 to 150 Hz and acceleration level of 0.25 G-rms and it was found that between simulated and measured frequencies of the pears have a relatively good agreement. It was observed that the fruit and vegetables in corrugated fiberboard container could be analyzed by finite element method. As the elastic modulus of the cushion materials of corrugated fiberboard pad and tray cup decreased, the first frequencies of upper and lower pears increased and the peak acceleration decreased.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.547-553
• /
• 2022

This study analyzed the changes in the operational productivity of fourteen Korean container lines from 2019 to 2021 using MP I(Malmquist Productivity Index). The results indicated that the operational productivity of the shipping companies has increased by 38.4% annually, representing the TCI (Technical Change Index) increasing by 58.3% and the TECI (Technical Efficiency Change Index) decreasing by 12.6%. The increase in the operational productivity of the container shipping lines was mainly attributed to the high rise in ocean freight rates rather than an increase in fleet size or ship technical efficiency. However, the deep-sea shipping lines (i.e. HMM and SM lines) experienced increases in both the TCI and TECI, which was not the case for other shipping lines(i.e. Intra-Asian short-sea shipping lines). The intra-Asian short-sea shipping lines enhance their productivity due to the TCI but failed to appreciate the cost savings of the increased fleet effects due to the low SECI(Scale Efficiency Change Index) values.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1178-1185
• /
• 2010

Recently, high speed of container freight cars is causing fatigue damage of wheel. Sudden failure accidents cause a lot of physical and human damages. Therefore, damage analysis for wheel prevents failure accident of container freight car. Wheel receives mechanical and thermal loads at the same time while rolling stocks are run. The mechanical loads applied to wheel are classified by the horizontal load from contact of wheel and rail in curve line section and by the vertical force from rolling stocks weight. Also, braking and deceleration of rolling stocks cause repeated thermal load by wheel tread braking. Specially, braking of rolling stocks is frictional braking method that brake shoe is contacted in wheel tread by high breaking pressure. Frictional heat energy occurs on the contact surface between wheel tread and brake shoe. This braking converts kinetic energy of rolling stocks into heat energy by friction. This raises temperature rapidly and generates thermal loads in wheel and brake shoe. There mechanical and thermal loads generate crack and residual stress in wheel. Wetenkamp estimated temperature distribution of brake shoe experimentally. Donzella proposed fatigue life using thermal stress and residual stress. However, the load applied to wheel in aforementioned most researches considered thermal load and mechanical vertical load. Exact horizontal load is not considered as the load applied to wheel. Therefore, above-mentioned loading methods could not be applied to estimate actual stress applied to wheel. Therefore, this study proposed safety estimation on wheel of freight car using heat-structural coupled analysis on the basis of loading condition and stress intensity factor.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.613-622
• /
• 2009

The modal spilt of highway has been increased and the one of railway has been decreased from 17.2%(1990) to 6.3%(2006). In this context, it is meaningful to examine the competitiveness of the railroad of Korea. The objective of this study is to analyze the competitiveness of railroad with the highway so that countermeasures improving the competitiveness of railroad could be suggested. For this, firs of all, indicators representing the competitiveness of the railroad transport are determined. The main influencing factors for mode choice include transport time, transport cost and level of service. Three types of commodity, container, cement and steel are the target for the analysis. It was found that the overall competitiveness of railroad transport is weaker compared with highway even for the main freight origin-destination pairs. It means that the freight transport system is focused on road rather than railroad. Therefore, we need to remeasure the competitiveness of railroad transport related to methods for freight railroad competitiveness improvement.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.205-212
• /
• 2007

Due to the construction of Incheon Grand Bridge, there is driven a necessity for rearranging the function of Inner Port with the development of Outer South Port. In this paper, I'd like to simulate the port operation levels of Lock Gate in Inner Port with estimating the traffic volumes of 2011 and 2015, which will reveal the Demurrage Cost and the Accumulation Cost of Freight in Inner Port. Finally I will evaluate the economic movement effects of the container ship's calling from Inner port to South Port/Outer South Port from 2011 to 2015. The results are as followings ; (1) The average utilization of Lock Gates are reduced by $7\sim8$ percentage point. (2) The mean queueing value are saved by 25 percentage point. (3) The Demurrage Cost and the Accumulation Cost of Freight except Lock Gate charges and the Benefit of Routeing Reduction are saved about 800 million Won annually.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.1
• /
• pp.19-23
• /
• 2007

Shock and vibration inputs are transmitted from the transporting vehicle through the packaging to the fruit. The vibration causes sustained bouncing of fruits against each other and the container wall. The steady state vibration input may cause serous fruit injury, and the damage is particularly severe if the fruits are bounced at its resonance frequency. The determination of the resonance frequencies of the fruits and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruits, and to understand the complex interaction between the components of the fruits when they relate to expected transportation vibration inputs. To analyze the vibration properties of the apples for optimum packaging design during transportation, random vibration tests were carried out. In the random vibration test, the resonance frequency and PSD of the packaged freight of apples in the test were in the range of 82 to 97 Hz and 0.0013 to $0.0021G^2/Hz$ respectively and the resonance frequency and PSD of the packaged apples in the test were in the range of 13 to 71 Hz and 0.0143 to $0.0923G^2/Hz$.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.201-208
• /
• 2009

As the ubiquitous environment is created, the latest ports introduce U-Port services in managing ports generally and embody container's location identification system, port terminal management system, and advanced information exchange system etc. In particular, the location identification system for freight cars and containers provide in real time the information on the location and condition for them, and enables them to cope with an efficient vehicle operation management and its related problems immediately. However, such a system is insufficient in effectively handling with the troubles in a large-scale port including freight car's disorderly driving, parking, stop, theft, damage, accident, trespassing and controlling. In order to solve these problems, this study structures the vehicle positioning system and the image verification system unsing high resolution image compression and AVE/H.264 store and transmission technology, able to mark and identify the vehicle location on the digital map while a freight car has stayed in a port since the entry of an automatic gate, or able to identify the place of accident through image remotely.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.7-16
• /
• 2009

Because the transport policy of Korea has overemphasized road, the physical distribution function of railroad has dwindled a great deal relatively. Recently, the railway has started to be embossed due to the rise of oil prices and environment problems, in addition the government is investing greatly in railroad. The railway corporation took a big step in its history in changing to a public corporation in 2005, and it has been making every possible endeavor to improve management. This research analyzed the trend and stability of the efficiency of railway container handling goods station in korea from 2002 to 2007 based on time of after being changed to a public corporation in 2005 in order to look into the trend of efficiency. The DEA- AR(Data Envelopment Analysis-Assurance Region) and the DEA-Window, widely used as the estimation techniques of the efficiency, were used. According to the results, the efficiency was a little enhanced in 2003 in comparison with 2002, after which it continuously decreased up to 2006 and again rose in 2007. The efficiency of the railway corporation was 0.6777, but after changing to a public corporation, it showed a trend of better efficiency after some transition period had passed.

• Journal of Korea Port Economic Association
• /
• v.37 no.2
• /
• pp.107-118
• /
• 2021

This study investigates the strategies that are important for selecting shuttle carriers and logistics warehouses. In container transportation, competitive pricing has become an order qualifier due to the establishment of the standard freight rate system. As a result of this study, it can be seen that both logistics warehouses and shuttle carriers place greater importance on the partnerships with companies and employee education. Besides those two factors, the punctuality of delivery is found to be important for the quality of transportation. Therefore, companies must continue to increase their competitiveness. As customer service of the shuttle carrier, resolving the loss or damage and claim handling part is evaluated more importantly in the logistics warehouse than the ablity to resolve unexpected event. The future strategy should focus on resolving the loss/damage and claim handling factors so that companies can be competitve in the future. Based on research results, logistics warehouses and shuttle carriers can establish different marketing strategies to maintain a firm position on the market by securing competitive advantage within port hinterland.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.26
• /
• pp.143-172
• /
• 2005

The biggest exchange of international environment of shipping logistics in 21 century should appear ultra-mega container ships on the shipping market. The competitive trend of large size container ship was based on economics of scale among the international shipping business. In the environment, shipping firms consider the integration of freight forwarder and shipper in the international logistics process. The aims of this research analyse a relation between the environment uncertainty and logistics information system(LIS) and the integration and resolve the integration and its impact on logistics performance. The research methodology of this research analyse structural equation modeling on the relation of variables. The results of research are as follows. First, Environmental uncertainty significantly influences the internal integration and the external integration. Second, LIS has an influence on the logistics integration by providing the foundation for LIS utilization in international logistics process. Third, the internal integration significantly influences a logistics performance, which implies that firms should promote interaction and collaboration through internal process integration to achieve logistics performance as the logistical cost and service. But the external integration is not significantly a logistics performance.