• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.679-685
• /
• 2001

In this paper, the dynamic response of the pantograph system that supplies electrical power to a high-speed rail vehicle were investigated. The analysis of the catenary based on the Finite Element Method (FEM) is executed to develop a pantograph fits well in high-speed focused on the dynamic characteristic analysis of the pantograph system. By simulation of the pantograph-catenary system, the static deflection of the catenary, the stiffness variation in contact lines, the dynamic response of the catenary undergoing constant moving load and the contact force analysis were executed. In order to consider the design variables that effects on the dynamic characteristic of the pantograph system performed the dynamic sensitivity analysis. From the pantograph-catenary analysis, the design parameters of a pantograph could be improved. From the results of the sensitivity analysis, a pantograph with improved parameters is suitable for a high-speed rail vehicle from the design-parameter analysis.

• ETRI Journal
• /
• 제35권4호
• /
• pp.571-577
• /
• 2013

The fabrication of a thin-film transistor backplane and a liquid-crystal display using printing processes can eliminate the need for photolithography and offers the potential to reduce the manufacturing costs. In this study, we prepare contact via structures through a poly(methyl methacrylate) polymer insulator layer using inkjet printing. When droplets of silver ink composed of a polymer solvent are placed onto the polymer insulator and annealed at high temperatures, the silver ink penetrates the interior of the polymer and generates conducting paths between the top and bottom metal lines through the partial dissolution and swelling of the polymer. The electrical property of various contact via-hole interconnections is investigated using a semiconductor characterization system.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.507-511
• /
• 2019

The purpose of an electric railway system contact wire is to supply electric energy to trains through a contacted pantograph. This energy is then converted into mechanical energy. Recent developments in overhead contact lines include the increase in the tension force up to 34 kN according to train speeds that reach up to 400 km/h with a verified safety. Rigid conductor catenary (R-Bar) for high speeds of up to 250 km/h have been developed in tunnels to save on construction costs. This is significant because minor defects in R-bars in aspects, such as height and stagger affect installation conditions. In this study, we propose the use of a detector that measures the static characteristics to reduce the R-bar installation errors. This detector has been developed to measure the height and stagger of the contact wire using video images.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.116-121
• /
• 2020

In this study, a single-phase analysis of droplet slug with different contact angles was performed based on the visualization of experimental results. Droplet slug - flowing between gases in a hydrophobic mini channel - moves with a triple contact line without a gas liquid film on the wall. The results show that the rotational flow inside the droplet occurred; this was compared and verified with the results of two-phase analysis. The pressure field shows pressure rise at the front and rear ends. The effective length - the section that satisfies the laminar flow condition - became shorter as the droplet velocity increased. The Choi's correlation for the effective length agrees with this analysis results with a slight difference. This difference is judged as the difference in the contact angle of the slug model.

• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.227-235
• /
• 2018

PURPOSE. Implant site preparation may be adjusted to achieve the maximum possible primary stability. The aim of this investigation was to study the relation among bone-to-implant contact at insertion, bone density, and implant primary stability intra-operatively measured by a torque-measuring implant motor, when implant sites were undersized or tapped. MATERIALS AND METHODS. Undersized (n=14), standard (n=13), and tapped (n=13) implant sites were prepared on 9 segments of bovine ribs. After measuring bone density using the implant motor, 40 implants were placed, and their primary stability assessed by measuring the integral of the torque-depth insertion curve. Bovine ribs were then processed histologically, the bone-to-implant contact measured and statistically correlated to bone density and the integral. RESULTS. Bone-to-implant contact and the integral of the torque-depth curve were significantly greater for undersized sites than tapped sites. Moreover, a correlation between bone to implant contact, the integral and bone density was found under all preparation conditions. The slope of the bone-to-implant/density and integral/density lines was significantly greater for undersized sites, while those corresponding to standard prepared and tapped sites did not differ significantly. CONCLUSION. The integral of the torque-depth curve provided reliable information about bone-to-implant contact and primary implant stability even in tapped or undersized sites. The linear relations found among the parameters suggests a connection between extent and modality of undersizing and the corresponding increase of the integral and, consequently, of primary stability. These results might help the physician determine the extent of undersizing needed to achieve the proper implant primary stability, according to the planned loading protocol.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.502-502
• /
• 2007

전차선로는 각 경간마다 양단으로 지지점을 갖게 되므로 지지점에서의 탄성도와 경간중앙에서의 탄성도가 같을 수 없다. 이 두 지점의 탄성도의 차이를 나타내는 계수로 불균일율이라는 지수가 정의되어 널리 사용되어왔다. 이 불균일율은 전차선 장력과 경간 길이에 크게 영향 받는다. 그러나 드로퍼의 배치 간격에 따라서도 달라진다. 이 불균일율은 전차선로의 동적인 특성을 예측하는 하나의 변수로 활용되고 결국 집전 성능을 상대 비교하여 판단하는데 활용되며, 직접적으로는 드로퍼 간격을 설계하는데 있어서 중요한 파라미터로 사용되고 있다. 그러나 이 불균일율은 전차선로의 동적 성능을 적절히 반영하는 지수가 되지 못하고 있다고 판단하고 있다. 불균일율의 정의인 경간 중앙에서의 탄성율과 경간 끝 지정의 탄성율과의 단순한 차이 값의 크기만으로는 드로퍼의 수와 배치 간격에 따른 특성을 반영하지 못한다고 판단된다. 이를 여러 가지 다양한 케이스를 가정하여 탄성도 해석 프로그램을 이용하여 평가해본다. 평가 결과를 토대로 드로퍼 수에 따른 보정계수를 갖는 새로운 불균일율 평가 지수를 제시하고자 하며 이 새로운 지수가 기존의 지수보다 보다 집전 성능을 판단하는데 유용한 데이터가 됨을 증명한다. 또한 아울러 불균일율이 다른 가선 구조에 대하여 팬터그래프의 1단과 2단의 스프링 계수의 크기와의 조합과 상환 관계에 따른 집전 성능의 차이를 전차선로-팬터그래프 동역학 시뮬레이션 프로그램을 사용하여 평가한다. 이를 통하여 불균일율에 따른 보다 적절한 팬터그래프 동역학 모델을 제시한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.53.2-53.2
• /
• 2010

In this study, we focused on our specialized electrode process for Si back-contact crystalline solar cell. It is different from other well-known back-contact cell process for thermal aspect and specialized process. In general, aluminum makes ohmic contact to the Si wafer and acts as a back surface reflector. And, silver is used for low series resistance metal grid lines. Aluminum was sputtered onto back side of wafer. Next, silver is directly patterned on the wafer by screen printing. The sputtered aluminum was removed by wet etching process after rear silver electrode was formed. In this process, the silver paste must have good printability, electrical property and adhesion strength, before and after the aluminum etching process. Silver paste also needs low temperature firing characteristics to reduce the thermal budget. So it was seriously collected by the products of several company of regarding low temperature firing (below $250^{\circ}C$) and aluminum etching endurance. First of all, silver pastes for etching selectivity were selected to evaluate as low temperature firing condition, electrical properties and adhesive strength. Using the nano- and micron-sized silver paste, so called hybrid type, made low temperature firing. So we could minimize the thermal budget in metallization process. Also the adhesion property greatly depended on the composition of paste, especially added resin and inorganic additives. In this paper, we will show that the metallization process of back-contact solar cell was realized as optimized nano-paste characteristics.

• 한국철도학회논문집
• /
• 제15권5호
• /
• pp.447-453
• /
• 2012

본 논문은 경부 고속선과 같이 사전이도가 주어지는 기설 전차선로에서 전차선 장력만을 증가시켜 임시적인 속도 향상 도모하는 경우에 팬터그래프와 습동하는 전차선의 접촉 평면상의 기하학적 형상의 변화가 어떻게 될 것인가를 검토한 것이다. 검토를 위하여 우선 사전이도가 있는 경우에도 정확히 드로퍼 길이를 계산해 낼 수 있는 드로퍼 길이 계산 수식에 대하여 알아보았다. 다음으로 드로퍼 길이 계산 수식을 프로그램화한 전용계산 프로그램을 이용하여 경부고속선 전차선로의 49.5m 경간을 대상으로 전차선 장력을 20kN에서 23kN 및 25kN으로 증가시켰을 때 사전이도량의 변화를 계산하여보았다. 그리고 경부 2단계 구간 현장에서 실제 장력 증가 실험을 실시하여 사전이도량의 변화를 측정하였다. 측정 결과는 계산 값과 비교 검토를 수행하였으며, 결론적으로 전차선 장력을 증가시켜도 기하학적 형상의 변화는 미미하며 집전 성능에 별 영향이 없을 것임을 확인하였다.

• 품질경영학회지
• /
• 제24권4호
• /
• pp.141-155
• /
• 1996

In service industries, it is very hard to transform the quantified factor into qualified one. Nowadays, however, service industries employee various methods developed by the academic society to manage effectively. Therefore, we have focused our research on QFD that is applied to improve the flow of execution in customer complains in Air Lines which can be considered as the representation of Service Industries. QFD is a method of developing new service with response to the demand from customer thanks to the application of QFD. In this paper we decide the priority of the department for executing the customer service of Air Lines. After setting up the relations among departments, we analyze the problems caused by the contact between customers and departments.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1180-1185
• /
• 2014

This paper describes the effects on SUS tube of power optical fiber composite cable on underground transmission lines. The effects on grounding, air gap between SUS tube and metal sheath, contact resistance between outer semi-conducting layer and metal sheath and grounding of SUS tube application or not are variously analysed using EMTP in normal operating condition as well as single line to ground fault. From these results, in this paper, the scheme for protecting the electrically abnormal phenomena will be established on power-optical fiber composite cable of underground transmission lines. This paper can contribute to specification of grounding reference of SUS tube of optical fiber composite power cable system.