• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.195-200
• /
• 2018

This study investigated the effects of the post annealing temperatures on the electrical and interfacial properties of a metal-semiconductor-metal photodetector(MSM-PD) device. The interdigitate type MSM-PD devices had the structure Al(500 nm) / Ti(200 nm) / poly-Si(500 nm). Structural analyses of the MSM-PD devices were performed by employing X-ray diffraction(XRD), scanning electron microscopy(SEM) and transmission electron microscope(TEM). Electrical characteristics of the MSM-PD were also examined using current-voltage(I-V) measurements. The optimal post annealing condition for the Schottky contact of MSM-PD devices are $350^{\circ}C$-30minutes. However, as the annealing temperature and time are increased, electrical characteristics of MSM-PD device are degraded. Especially, for the annealing conditions of $400^{\circ}C$-180minutes and $500^{\circ}C$-30minutes, the I-V measurement itself was impossible. These results are closely related to the solid phase reactions at the interface of MSM-PD device, which result in the formation of intermetallic compounds such as $Al_3Ti$ and $Ti_7Al_5Si_{12}$.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.1 no.1
• /
• pp.6-11
• /
• 2003

Various forms of dialytic techniques are available for detoxification. Hemodialysis, hemoperfusion and hemofiltration (hemodialfiltration) are the main treatment modalities. Because these modalities are rather invasive and expensive, it must be decided in balance of the risk and benefit to the patient. The prime consideration in the decision is based on the clinical features of poisoning; hemodialysis or hemoperfusion should be considered in general if the patient's condition progressively deteriorates despite intensive supportive therapy. The hemodialysis technique relies on passage of the toxic agent through a semipermeable membrane so that it can equilibrate with the dialysate and subsequently removed. It needs a blood pump to pass blood next to a dialysis membrane, which allows agents permeable to the membrane to pass through and reach equilibrium. Solute (or drug) removal by dialysis has numerous determinants such as solute size, its lipid solubility, the degree to which it is protein bound, its volume of distribution etc. The technique of hemoperfusion is similar to hemodialysis except there is no dialysis membrane or dialysate involved in the procedure. The patient's blood is pumped through a perfusion cartridge, where it is in direct contact with adsorptive material (usually activated charcoal) that has a coating material such as cellulose. This method can be used successfully with lipid-soluble compounds and with higher-molecular-weight compounds than for hemodialysis. Protein binding does not significantly interfere with removal by hemoperfusion. In conclusion, hemodialysis, hemoperfusion and hemofiltration can be used effectively as adjuncts to the management of severely intoxicated patients.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.32-32
• /
• 2009

Silicon carbide (SiC) is a wide-bandgap semiconductor that has materials properties necessary for the high-power, high-frequency, high-temperature, and radiation-hard condition applications, where silicon devices cannot perform. SiC is also the only compound semiconductor material. on which a silicon oxide layer can be thermally grown, and therefore may fabrication processes used in Si-based technology can be adapted to SiC. So far, atomic force microscopy (AFM) has been extensively used to study the surface charges, dielectric constants and electrical potential distribution as well as topography in silicon-based device structures, whereas it has rarely been applied to SiC-based structures. In this work, we investigated that the local oxide growth on SiC under various conditions and demonstrated that an increased (up to ~100 nN) tip loading force (LF) on highly-doped SiC can lead a direct oxide growth (up to few tens of nm) on 4H-SiC. In addition, the surface potential and topography distributions of nano-scale patterned structures on SiC were measured at a nanometer-scale resolution using a scanning kelvin probe force microscopy (SKPM) with a non-contact mode AFM. The measured results were calibrated using a Pt-coated tip. It is assumed that the atomically resolved surface potential difference does not originate from the intrinsic work function of the materials but reflects the local electron density on the surface. It was found that the work function of the nano-scale patterned on SiC was higher than that of original SiC surface. The results confirm the concept of the work function and the barrier heights of oxide structures/SiC structures.

• Korean Journal of Oriental Medicine
• /
• v.16 no.3
• /
• pp.107-113
• /
• 2010

Objective : Active treatment for a skin condition has produced a substantial change in the history of allergic contact or wound induced dermatitis. The frequency of opportunistic contacts and allergen-related dermatitis has increased, though new skin treatments have developed. Especially, there has been a interest in the korean herbal bathing. This study was performed to investigate the effects of the korean herbal bathing candidates on skin lesions in mice model. These candidates are Korea's representative herbs on skin lesions. Method : ICR mice were divided into five groups : naive, control, experimental group A and B and C. Control and experimental groups induced skin lesions by DNFB and TMA. Each experimental group was pasted with corresponding korean herbal bathing candidates on skin lesions. Result : Significant improvements in skin wound index, epidermal thickness associated with skin lesions were seen with the korean herbal bathing candidates. Conclusion : These results suggest that the korean herbal bathing candidates could be at least as effective as steroid, anti-histamine for the treatment of skin lesions.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.22-28
• /
• 2017

According to the National Fire Data System (NFDS), more than 5,000 vehicle fires have occurred every year for the last 10 years. Vehicle fires are primarily caused by mechanical (breaking system and engine), electrical (wiring and battery), and chemical (oil and fuel gas leakage) problems. The electrical factor has increased with the installation of driver convenience equipment. For example, today, the black box is widely used to provide video data recording of motor vehicle accidents. The black box consists of a front camera, rear camera, and wires. The black box wires are directly connected to the junction box or fuse box from the start battery that operates to provide normal on power supplying for engine stop. It is extremely dangerous when the wires short circuit due to insulation aging, mechanical and electrical stress, etc. In this study, the black box wiring fire risk have been analyzed and investigated when the steady state and abnormal operations, and under the following conditions: wiring arrangements with a high temperature condition, insulation aging, poor contact, and short circuits. The results showed that black box wiring short circuits had a higher fire risk than the other fire hazard elements. To prevent fire hazards caused by black box wiring, the black boxes must be installed by qualified service personnel. Do not modify the wiring, remove the fuse and secure the wiring using cable ties or insulation tape.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.4
• /
• pp.75-82
• /
• 2015

The elderly rate in South Korea in 2015 is over 13.1%. Especially, the elderly rate in rural area is high. Senior community project in rural that is being promoted by the government. This study's purpose is to provide the reserch group-home for the elderly in Japan rural area. And this paper provided planning of group-home for the elderly in Korea rural area. For this study, respective 5senior housing of Korea and Japan were chosen as respresenting two nations, and every manager was interviewed on housing pattern. This study suggests the planning material as following. First, the effectiveness of the group-home are big. Especially, the elderly was far healthier. Design point is public space(living room, small living room, etc). Maybe, healthy group-home concept is that would be design by Korean traditional housing. Also important public space design is that would be inner courtyard-house, wood floor, Deachong, etc. Two group-homes will construct elderly welfare facilities in between. Otherwise that is need layout of a big public space. In the case of vacant house can used by considering of scale, structure, site condition. Closed school can used through so easy remodeling too. More often than not complex type(hospital, community heath center) was appeared in Japan rural area. In the case of Korea, recommend complex type in community health center and public building. In this case, considering communication, access, contact, group-home keeps on ground floor. In this paper, we hope to take a lesson from group-home planning source for the elderly in Korea rural area.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.405-416
• /
• 2005

The rubblization technique is breaking the aged concrete pavement slab into rubblized concrete aggregate, and use it as an base material at its original position, then builds overlay above the rubblized base. This method has been successively used in USA due to the advantage of good contructibility, cost-effectiveness as well as the capability of preventing of reflection cracks. However, constructibility and economic performance of rubblization on typical Korean concrete pavements needed to be investigate since to typical Korean concrete pavements have thick slab, as well include lean concrete subbase course. This stud explored optimum breaking depth and suggested minimum 10cm based on reflection crack simulation test. Also proper head shape and impact energy were investigated based on small breaking field tests. It was found that $127kg/cm^2$ of stress with 52.3% of head contact area are breaking requirement. Also, Multi-head type breaker suitable for Korean condition was designed and developed. This multi-head type breaker was designed to rubblize old concrete to the suggested optimum rubblized-depth and rubblized-concrete-aggregate size to prevent reflection crack and maintain high bearing capacity. This machine was used for the test of rubblization of old concrete pavement on a non-use old concrete and a in-serviced road. In these two tests, engineering properties of rubblized base and constructability and cost were investigated. In both tests, the old concrete rubblized to targeted size and depth, and high-level bearing capacity was achieved. Also, superior constructability and lower cost compared with traditional reconstruction was examined.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.651-657
• /
• 2016

The purpose of this research was to examine the possibility on the recycling of foodwaste leachate as external carbon sources using microbubble. The following operating conditions were selected: pressurizing tank 3 bar, circulation flow rate 3.65 LPM, and air flow rate 0.3 LPM with batch type. Microbubble contact time of 18 hours is optimal time to satisfy the recycling of foodwaste leachate as external carbon sources with batch type. HRT 18 hours came up to standard for external carbon sources, except for T-P concentration with continuous type. Coagulants need to be used for removal of dissolved phosphorus concentration by more than 88.5% of the total phosphorus concentration. The VFA was influenced by the organic decomposition rate and the concentration in the aerobic condition. It was considered that the VFA was needed for selection the optimal HRT or the addition of acid fermentation process in order to meet recycling standard of foodwaste leachate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.207-212
• /
• 2016

High-frequency induction hardening (HFIH) is used in many industries and has a number of advantages, including reliability and repeatability. It is a non-contact method of providing energy-efficient heat in the minimum amount of time without using a flame. Recently, HFIH has been actively studied using the finite-element method (FEM), however, these studies only focused on the accuracy of the analysis. In this paper, we analyzed HFIH by using a variable frequency based on the conditions of the same shape and input power then comparing the analysis results to experimental results. The analysis and experimental results indicate that the hardening depths are approximately the same using the optimal frequency of 3kHz.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.148-155
• /
• 2008

The aim of the study is to interpret the distribution of occlusal force by 3-dimensional finite element analysis of ISP(Implant Supported Prosthesis) supported by minimum number of implant to restore the edentulous patients. For this study, the Astra Tech implant system is used. Geometric modeling for 6 and 4 fixture ISP group is performed with respect to the bone, implant and one piece superstructure, respectively. Implants are arbitrarily placed according to the anatomical limit of lower jaw and for the favorable distribution of occlusal force, which is applied at the end of cantilever extension of ISP with 30mm. Element type is tetrahedral for finite element model and the typical mechanical properties, Young's modulus and Poisson's ratio of each material, cortical, cancellous bone and implant material are utilized for the finite element analysis. From this study, we can see the distribution of equivalent stress equal to real situation and speculate the difference in the stress distribution in the whole model and at each implant fixture, From the analysis, the area of maximum stress is distributed on distal contact area between bone and fixture in the crestal bone. The maximum stress is 53MPa at the 0.2mm area from the bone-implant interface in the maximum side for 300N load condition for 4 fixture case, which is slightly less than the stress calculated from allowable strain. This stress has not been deduced to directly cause the loss of crestal bone around implant fixture, but the stress can be much reduced as the old peoples may have lower chewing force. Thus, clinical trial may be performed with this treatment protocol to use 4 fixtured ISP for old patients.