• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.605-609
• /
• 2003

The lower-order lithium organocyanocuprate compound, (THF)₃Li(NC)Cu($C_6$H₃-2,6-Mes₂) (1), and the bulky terphenyl Grignard reagent, Br(THF)₂Mg($C_6$H₃-2,6-Trip₂) (2), have been synthesized and structurally characterized both in the solid state by single crystal x-ray crystallography and in solution by multi-nuclear NMR and IR spectroscopy. The compound (1) was isolated as a monomeric contact ion-pair in which the C (organic ipso)-Cu-CN-Li atoms are coordinated linearly. The lithium has a tetrahedral geometry as a result of solvation by three THF molecules. The compound (1) is the first example of fully characterized monomeric lower order lithium organocyanocuprate. The bulky Grignard reagent (2) was also isolated as a monomer in which the magnesium, solvated by two THF molecules, has a distorted tetrahedral geometry. The crystals of (1) possess triclinic symmetry with the space group $P{\={1}}$, Z = 2, with a = 12.456(3) Å, b = 12.508(3) Å, c = 13.904(3) Å, α = 99.81°, β = 103.72(3)°, and γ = 119.44(3)°. The crystals (2) have a monoclinic symmetry of space group $P2_{1/C}$, Z = 4, with a = 13.071(3) Å, b = 14.967(3) Å, c = 22.070(4) Å, and β = 98.95(3)°.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.790-796
• /
• 2013

Roasting 온도를 $80{\sim}140^{\circ}C$로 달리한 한방차의 성분 변화를 분석한 결과는 다음과 같다. 처리온도의 상승에 따라 수분함량이 감소하고, 일부 탄화가 발생하며 조회분 함량이 상대적으로 상승하는 소폭 변화가 있었고, 조단백질 및 조지방 함량은 거의 변화가 없는 것으로 나타났다. 벤조피렌 함량은 0.17~0.35ppb으로 처리온도가 상승할수록 $B({\alpha})P$ 함량이 증가하는 경향을 보였다. 이러한 결과를 볼 때, 처리온도와 원재료에 따라 $B({\alpha})P$ 함량에 차이가 발생한 것으로 나타났는데, roasting의 경우 실제 내부온도는 약 $200^{\circ}C$내외에 그치지만 roaster 표면의 온도는 약 $2,000^{\circ}C$에 이르기 때문에 이 표면과 직접 접촉한 부분에서 일부의 $B({\alpha})P$가 생성된 것으로 판단된다. 한방차의 고형분용출율을 0.18~0.35%(w/w)를 나타내었는데, roasting 온도가 상승할수록 고형분용출율이 감소하는 경향을 나타내었다. 처리온도가 $80{\sim}110^{\circ}C$처리구간에서는 큰 변화를 나타내지 않은 반면 $110{\sim}140^{\circ}C$처리구간에서는 고형분용출율이 급격히 감소하는 경향을 보였다. 처리온도가 상승할수록 고형분용출율이 감소하는 것은 내부 조직이 치밀하여 상대적으로 용출이 어렵기 때문으로 생각된다.

• 전자공학회논문지D
• /
• 제36D권3호
• /
• pp.41-47
• /
• 1999

SiN로부터 GaAs로 확산된 Si을 이용하여 소스와 드레인 영역에 고농도 Si 확산층을 갖는 GaAs MESFET를 제작하였다. 제작된 MESFET의 소스와 드레인 영역은 950°C, 30초의 열처리에 의해 Si 확산층이 표면에서부터 350Å두께로 형성되어 확산층이 없을 때 1000Ω/sq.정도였던 면저항이 400Ω/sq.로 내외로 감소하였다. 고농도로 확산된 Si은 AuGe/Ni/Au와 GaAs 기판 사이의 저항성 접촉 특성을 2.5×10\sub -6\Ω-cm\sup 2\로부터 1.5×10\sup -6\Ω-cm\sup 2\로 개선시켰다. 제작된 lum게이트 길이의 확산층을 갖는 MESFET는 최대 트랜스컨덕턴스가 260mS/mm 이었으며, 이득과 최소잡음지수는 12GHz에서 각각 8.5dB와 3.57dB를 나타내 같이 제작된 표면 확산 층이 없는 MESFET에 비해 1.3dB와 0.4dB가 향상되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.813-815
• /
• 1998

In order to analyse the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to the wavelength of ultraviolet rays and evaluated by comparing contact angle, surface resistivity, surface potential decay, and ESCA spectrum respectively. Finally, We can conclude that the degradation phenomena on the surface of epoxy composites are dominated by the induction of ester and carboxyl groups.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.716-723
• /
• 2002

Heat transfer in linear motor driven stages for surface mounting device applications was investigated. A simple one-dimensional thermal resistance model (TRM) was introduced. In order to reduce three-dimensional nature to one-dimensional, a few assumptions and simplifications were employed suitably. A good agreement with a finite element heat transfer analysis in temperature profile was obtained. For validation, the analysis was compared with the measurement with respect to motor driving power. Overall discrepancy was less than 7$^{\circ}C$. The influence of two high thermal resistance parts, insulation sheet and thermal contact between the coil assembly and the mounting plate, was examined through the analysis. Additionally, the thermal resistance analysis was applied to another stage including an internal cooling-air passage, and was found available for this system as well. After validation, the cooling effect was surveyed in terms of motor power, and cooling-air and -water flow rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1896-1898
• /
• 2002

In this paper, to developing thermally and mechanically upgraded ones, we dismounted pole transformers used in the fields for over 13 years and conducted aged oil analysis. Also, when the cellulose and aramid papers in test cell were aging with oil at $130^{\circ}C$ for 3000 hours, with the testing period cellulose paper deteriorated more rapidly than the others. For example dielectric strength and dissipation factor of papers deteriorated with aging time. For evaluation of thermal aging characteristics, a mineral oil-immersed transformer was constructed with hybrid insulation system comprised of aramid paper and cellulose insulation. A Hybrid system has economic advantages. Cellulose materials are confined to cooler regions of the transformer winding. And aramid papers are served to insulate contact parts of hot conductors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1449-1451
• /
• 1997

Busbar made with Cu or Cu alloys and producted by Plastic manufacturing process. In this study, we research the manufacturing trend of Cu clad Al busbar for low cost and light weight which used for a electric power supply of distributing board. The objectives of this study is the manufacturing of composite busbar on electric power supply, the process and application for Cu clad Al busbar and the relation between electric properties and manufacturing operating process on contact parties.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.636-643
• /
• 2001

Interference between the crossover leg of the reactor coolant system (RCS) and the pipe whip restraints (PWR) has brought a degradation issue of the integrity of the Reactor Coolant System in Westinghouse type nuclear power plants (NPPs) of Korea. According to the gap Inspect ion carried out during planned overhaul (Year 2000), interference between the crossover leg and the PWR was found in each RCS loop. This plant has had the high vibration problem on the RC pump 'B'. The reason for the high vibration in the RC pump 'B' had been massively surveyed and it was found that the crossover leg of RCS contacted with the PWR in hot condition. Since the contact between the crossover leg and the PWR changes the dynamic characteristics of the piping system for the RCS, this is considered as one reason for the high vibration. And a possibility of overstress on the crossover leg due to the contact with the PWR should be evaluated. Through performing RCS integrity analyses, subsequent actions were initiated to increase the gap between those parts. As the results of the appropriate separation between two parts, it was reported that there was no unusual noise or vibration during plant heat-up. In this paper, the evaluations for the gap between the crossover leg and the PWR and the structural integrity due to loop binding is described.

• 대한한방소아과학회지
• /
• 제13권1호
• /
• pp.253-275
• /
• 1999

The effects of Sagunjatang and Samultang on the immunosuppression induced by methotrexate(MTX) in rats were investigated in this study. The multiple parameters of immunity assessed in each rats included leukocyte count, lymphocyte rate, the number of lymphocyte in tibial bone marrow, contact hypersensitivity to DNFB, morphological change of thymocyte and IgG antibody on SDS-PAGE. Sprague-Dawley male rats were used and divided into five groups at random. Group A was normal control. Group B, the MTX treatment control, was injected i.v. with 2mg/kg of on days 9, 11 after sensitization with SRBC on 5th day. Group C, the experimental control, was treated Sagunjatang for 18days and MTX. Group D was treated Samultang for 18days and MTX. Group E was treated Sagunjatang-Samultang for 18days and MTX. The dosage of Sagunjatang and Samultang was $1m{\ell}/day$ respectively. In the case of Group E, rats Were fed Sagunjatang $1m{\ell}$ in the morning and Samultang $1m{\ell}$ in the afternoon. The results are summarized as follows: 1. Leukocyte count in rats induced by intravenous sensitization with SRBC was decreased significantly in Group E. 2. Leukocyte counts of 2weeks later after being treated MTX were increased significantly in Groups C and D. 3. Lymphocyte rate in rats induced by intravenous sensitization with SRBC wasn't changed significantly in all the experimental groups. 4. Lymphocyte rate of 2weeks. later after being treated MTX was increased significantly in Group D. 5. The number of lymphocyte in tibial bone marrow was incereased significantly in Group C. 6. Contact hypersensitivity wasn't changed significantly in all the experimental groups. 7. Morphological finding of thymocyte in group C was similar to normal group as compared with control group. 8. Purified IgG of all the experimental groups showed two bands of 50,000 and 25,000 on SDS-PAGE. But there was no difference among experimental groups.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.543-543
• /
• 2013

Thin-film transistors (TFTs) based on oxide semiconductors have been regarded as promising alternatives for conventional amorphous and polycrystalline silicon TFTs. Oxide TFTs have several advantages, such as low temperature processing, transparency and high field-effect mobility. Lots of oxide semiconductors for example ZnO, SnO2, In2O3, InZnO, ZnSnO, and InGaZnO etc. have been researched. Particularly, zinc-tin oxide (ZTO) is suitable for channel layer of oxide TFTs having a high mobility that Sn in ZTO can improve the carrier transport by overlapping orbital. However, some issues related to the ZTO TFT electrical performance still remain to be resolved, such as obtaining good electrical contact between source/drain (S/D) electrodes and active channel layer. In this study, the bottom-gate type ZTO TFTs with staggered structure were prepared. Thin films of ZTO (40 nm thick) were deposited by DC magnetron sputtering and performed at room temperature in an Ar atmosphere with an oxygen partial pressure of 10%. After annealing the thin films of ZTO at $400^{\circ}C$ or an hour, Cu, Mo, ITO and Ti electrodes were used for the S/D electrodes. Cu, Mo, ITO and Ti (200 nm thick) were also deposited by DC magnetron sputtering at room temperature. The channel layer and S/D electrodes were defined using a lift-off process which resulted in a fixed width W of 100 ${\mu}m$ and channel length L varied from 10 to 50 ${\mu}m$. The TFT source/drain series resistance, the intrinsic mobility (${\mu}i$), and intrinsic threshold voltage (Vi) were extracted by transmission line method (TLM) using a series of TFTs with different channel lengths. And the performances of ZTO TFTs were measured by using HP 4145B semiconductor analyzer. The results showed that the Cu S/D electrodes had a high intrinsic field effect mobility and a low effective contact resistance compared to other electrodes such as Mo, ITO and Ti.