• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.29 no.2
• /
• pp.79-82
• /
• 2018

Background and Objectives : Laryngeal contact granuloma is benign inflammatory disease induced by excessive mechanical contact of larynx such as endotracheal intubation, voice abuse, laryngeal microsurgery as well as laryngopharygeal reflux. Because it is caused by various risk factors, multiple treatment modalities are required. The purpose of study is to evaluate treatment effect of topical steroid through nasal cavity in contact granuloma. Materials and Method : Fifty-two patients were enrolled in this study with exception of intubation granuloma. Patients were classified with four groups (Proton pump inhibitor (PPI), Nasal steroid spray (SPR), PPI+SPR, Observation) according to treatment modality. Results : Patients who treated with PPI (Odds ratio 2.45, p=0.03) and combination of PPI and SPR (Odds ratio 2.88, p<0.01) had significantly better response than patients who not treated with medical therapy. Conclusion : Combination therapy of nasal steroid spray and PPI is effective for contact granuloma of larynx and considered as a treatment of choice rather than PPI only treatment.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• Korean Journal of Head & Neck Oncology
• /
• v.33 no.2
• /
• pp.23-27
• /
• 2017

Background and Objectives: Gastric acid reflux is known to be the most important cause of contact granuloma. Therefore, anti-gastric acid reflux medication has been used as the first line treatment although there are other treatment methods such as surgery or steroid injections. Actually, the role of surgery in the treatment of contact granuloma has not been established clearly. The purpose of this study was to evaluate the effectiveness of surgical treatment for contact granuloma. Materials and Methods: We retrospectively reviewed the medical records of 14 patients who were diagnosed with contact granuloma and treated with surgery from 2011 to July 2016 at Hanyang University hospital. Results: Of 14 patients, 9 (64.3%) were male and 5 (27.4%) were female. The mean age was 53.8 (${\pm}6.1$) years. The main symptoms were voice change followed by globus, dyspnea, and asymptomatic. Mean Reflux Finding Score (RFS) before surgery was 13.5 and mead Reflux Symptom Index (RSI) was 10.4. The causes of surgery were inadequate response to proton pump inhibitor (PPI) in 4 cases, airway obstruction with large granuloma in 8 cases, and differential diagnosis in 2 cases. Of 14 patients, recurrence occurred in 8 (53.3%) patients after surgery. In 8 recurrent cases, 5 patients showed complete remission and 3 patients showed partial remission with PPI medication. Conclusion: The role of surgery in the treatment of contact granuloma might be limited due to high recurrence rate.

• Journal of the Korean Society of Food Culture
• /
• v.38 no.6
• /
• pp.442-455
• /
• 2023

This study investigated the effects of pectinase treatment and skin contact time on the quality characteristics of Dae-hong peach wine. Wine was produced with variations in enzyme treatment and skin contact time (1 hour, 2 hours, 1 day, 2 days, and until the completion of fermentation). Enzyme treatment increased the production yield by 6%, as well as ethanol and redness levels, compared to the non-treated control. Volatile components were higher when the skin contact time was 2 hours or 1 day. Results were compared according to enzyme treatment and skin contact time and found to be influenced by methanol and 3-methyl-1-butanol. Enzyme treatment effectively enhanced yields and volatile compound contents. However, skin contact should be concluded a day before 1 day to ensure compliance with methanol legislative requirements. Therefore, our findings show that enzymatic treatment with shorter skin contact time preserves the distinctive characteristics of Dae-hong peaches and ensures the production of safe and flavorful wine.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.31 no.2
• /
• pp.123-132
• /
• 2018

Objectives : The purpose of this report is to know the effect of Korean medicine treatments on Allergic Contact Dermatitis. Methods : We treated a 63-years-old man patient with Allergic Contact Dermatitis on the left medial calf with Korean medicine. After Korean medical treatment for 26 days, we identified a reduction in size of erythema and loss of color fading, exudates and edema. We recorded pictures of changes on symptoms. Results & Conclusions : The symptoms of Allergic Contact Dermatitis were improved. Erythema, edema, exudate were lost. Thus Korean medicine treatments are effective on allergic contact dermatitis.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.6
• /
• pp.314-319
• /
• 2008

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.6-9
• /
• 2010

Surface properties of polytetrafluoroethylene(PTFE) films fabricated by rf-magnetron sputtering system with UV surface treatment were investigated to increase water contact angle for their hydrophobic property. We found that the surface morphology and water contact angles of PTFE film modified as a function of the UV treatment times using UV-irradiation were influenced. The water contact angle of PTFE film with optimized UV treatment time for 15 minute showed a high hydrophobicity compared with the film without any surface treatment. We thought that it was due to the energy change of PTFE surface with an adhesion improvement to the glass surface as a smoothing a rough surface with needle-shape and/or the enhancement of an interface property as a removing some defects on the surface like a cleaning effect.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.10-13
• /
• 2010

The plasma processing technologies of thin film deposition and surface treatment technique have been applied to many industrial fields. This study is purposed Large-area uniformity and surface treatment on the stainless substrate. We treat surface of stainless by $CF_4$ plasma. $CF_4$ plasma is generated by using SPM(Scanning plasma method)which is kind a of CVD. Generally, SPM has been used for uniform surface treatment using a crossed electromagnetic field. The optimum discharge condition has been studied for the gas pressure, the magnetic flux density and the distance between substrate and electrodes. In result, contact angle is increased by surface treatment using $CF_4$ Plasma. Therefore we expect that SPM to control contact angle is applied to many industries.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.1
• /
• pp.10-19
• /
• 2008

To investigate the effect of ultrasonic nano-crystalline surface modification (UNSM) treatment on rolling contact fatigue and residual stress properties of bearing steels, this paper carried out a rolling contact fatigue test, measured residual stress and retained austenite, performed a wear test, observed microstructure, measured micro hardness, and analyzed surface topology. After the UNSM treatment, it was found that the surface became minute by over $100{\mu}m$. The micro surface hardness was changed from Hv730~740 of base material to Hv850~880 with about 20% improvement, and hardening depth was about 1.3 mm. The compressive residual stress was measured as high as -700~-900 MPa, and the quantity of retained austenite was reduced to 27% from 34%. The polymet RCF-6 ball type rolling contact fatigue test showed over 4 times longer fatigue lifetime after the UNSM treatment under 551 kgf load and 8,000 rpm. In addition, this paper observed the samples, which went through the rolling contact fatigue test, with OM and SEM, and it was found that the samples had a spalling phenomenon (the race way is decentralized) after the UNSM treatment. However, before the treatment, the samples had excessive spalling and complete exploration. Comparison of the test samples before and after the UNSM treatment showed a big difference in the fatigue lifetime, which seems to result from the complicated effects of micro particles, compressive residual stress, retained austenite, and surface topology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.235-236
• /
• 2006

The contact resistance and grain boundary potential barrier of ceramic $BaTiO_3$ PTCR were investigated. The electroless plated Ni, evaporated Al, and Ag paste were chosen as electrode materials of PTCR device for comparison analysis before and after heat treatment. The contact resistance of electrode were measured by electrometer (dc), digital multimeter (dc), and LCR meter (ac). In the case of Al electroded samples, the heat treatment and protective oxide layer had high resistance and effect on the stability of PTCR effect against contact resistance degradation, but the Ag-paste had comparably high contact resistance before heat treatment and decreased after heat treatment with safe. On the other hand, the samples with electroless plated Ni electrode had good properties of contact resistance against aging.