• 비파괴검사학회지
• /
• 제32권2호
• /
• pp.142-148
• /
• 2012

본 연구에서는 초음파원자현미경 캔틸레버의 접촉 공진주파수를 이용하여 실리콘 웨이퍼와 나노 스케일의 폴리머 박막 패턴의 접합면 사이에서 나타나는 접합 특성을 UAFM 이미지를 통해 평가하였다. 이를 위해 실리콘 웨이퍼의 표면 처리 공정을 다르게 하였고 리소그래피 공정을 통해 300 nm의 폴리머 박막 패턴을 제작하였다. 제작된 시험편의 접합 상태를 광학현미경 이미지를 통해 서로 비교하였고 나노 스크래치 시험의 임계하중 값을 통하여 나노 패턴의 접합 상태를 검증하였다. 각각의 시험편에 대해 UAFM을 이용하여 $1{\mu}m{\times}1{\mu}m$ 크기의 표면 이미지와 표층부의 접합 상태이미지를 각각 얻었고 접촉 공진주파수의 진폭과 위상의 변화로 인한 접합부의 이미지 콘트라스트 차이로 접합 상태를 평가하였다.

• 한국안광학회지
• /
• 제10권3호
• /
• pp.165-171
• /
• 2005

본 연구는 단백질 침착에 의한 소프트콘택트렌즈의 직경 및 곡률반경의 변화를 밝히기 위해 수행되었다. 소프트콘택트렌즈를 인공누액 및 누액과 동일한 조성의 단백질 용액에서 2분, 10분, 30분, 1시간, 3시간, 6시간, 12시간, 24시간 담가둔 후, 고속촬영기(Fastcam ultima 1024)로 촬영하여 직경 및 곡률반경을 측정하였다. 인공누액에 오랫동안 담가둔 소프트콘택트렌즈일수록 소프트콘택트렌즈의 직경과 곡률반경의 변화가 컸다. 단백질만을 침착시킨 소프트콘택트렌즈의 경우도 유사한 양상이 나타나 직경 및 곡률반경이 감소하였다. 그러나 칼슘이온의 영향은 단백질에 비해 미약한 것으로 나타났다. 이상의 결과로 누액 단백질로 인하여 소프트콘택트렌즈의 직경 및 곡률반경이 감소되며, 이러한 결과는 렌즈 착용 후의 착용감저하와 관련이 있을 것으로 여겨진다.

• 대한기계학회논문집A
• /
• 제32권4호
• /
• pp.303-309
• /
• 2008

Dense and fine polymer patterns often collapse, as they come into contact with each other at their protruding tips. Resist pattern collapse depends on the aspect ratio of patterns and the surface tension of rinsing materials. The pattern collapse is a very serious problem in microfabrication, because it is one of the factors which limit the device dimensions. The reasons for the pattern collapse are known as the surface tension of rinse liquid, centrifugal force and rinse liquid flow produced in the developing process. In this work, we tried to evaluate the pattern collapse of three-dimensional microstructures that were fabricated by two-photon induced photopolymerization, and showed the way how to reduce the deformation of microstructures.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.26-34
• /
• 2000

The new numerical procedure for hydroplaning has been developed by considering the following three important factors; fluid/structure interaction, tire rolling, and practical tread pattern. The tire was analyzed by FEM with Lagrangian formulation and the fluid is analyzed by FVM with Eulerian formulation. Since the tire and the fluid are modeled separately and their coupling is automatically computed by the coupling element, the fluid/structure interaction of the complex geometry such as the tire with the tread pattern can be analyzed practically. We verified the predictability of the hydroplaning simulation in the different parameters such as the water flow, the velocity dependence of hydroplaning, and the effect of the tread pattern on hydroplaning. In order to predict the streamline in the contact patch, the procedure of the global-local analysis was developed. Since the streamline could be predicted by this technology, we could develop the new pattern in a short period based on the principle; "make the stream line smooth".

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.13-19
• /
• 2014

Phosphoric acid was used as etching agent instead of conventional peroxide - based chemicals for forming pattern of ultra definition display. Etchant was synthesized by mixing etching agent, oxidation agent, buffer solution, and additive into solvent, deionized water. Thicknesses of copper, main metal of ultra definition display, for etching, were 10,000 and $30,000{{\AA}}$. Etch stop of good low skew for proper pattern formation has been occurred at the content ratio of phosphoric acid 60 - 64%, nitric acid 4 - 5%, additive(potassium acetate) 1 - 3%. Buffer solution(acetic acid) decreased the metal contact angle $63.07^{\circ}$ to $42.49^{\circ}$ for benefiting pattern formation. Content variations on four components (phosphoric acid, nitric acid, acetic acid, potassium acetic acid) of the etchant with storage time were within 3 wt% after 24 hrs of etching work.

• 한국안광학회지
• /
• 제9권1호
• /
• pp.53-68
• /
• 2004

소프트콘택트렌즈의 단백질 부착은 미생물에 의한 감염을 증가시킬 뿐만 아니라 이물감이나 흐릿한 시야를 비롯한 착용감의 저하 등과 같은 많은 부작용을 유발할 수 있다. 본 연구에서는 20대 20명(40안)이 착용한 소프트콘택트렌즈에의 단백질 부착 양상을 착용시간별로 조사하고, 렌즈의 접촉각과 총 가시광선 투과도에 미치는 영향을 알아보았다. 또한 각막의 용도 및 pH 변화가 단백질의 부착에 미치는 영향에 대하여서도 연구하였다. Etafilcon A 재질의 2주착용 소프트콘택트렌즈는 다목적용액으로 매일 관리를 하였음에도 불구하고 렌즈에 단백질이 남아있었으며 착용이 계속됨에 따라 정점 부착되는 단백질의 양도 증가하여 착용 후 14일이 지난 렌즈의 경우는 이미 렌즈의 접촉각이 통계적으로 유의성있게 크게 증가하여 렌즈 표면의 습윤성에 영향을 미칠 수 있음을 알 수 있었으며, 총 가시광선 투과량도 7% 정도 감소하였음을 확인하였다. 또한 소프트콘택트렌즈에서 단백질의 부착은 누액의 온도가 증가할수록 많아졌으며 누액의 pH가 중성인 경우 단백질의 부착양이 가장 적었으며 산성이나 알칼리성으로 갈수록 부착되는 단백질의 양이 증가하였다. 연속착용렌즈 착용시에는 눈을 뜨고 있는 활동시간보다 눈을 감고 있는 수면 중에 렌즈에 부착되는 단백질의 양이 크게 증가하였으며 이러한 결과는 성별과 관계없이 동일하였다. 연속착용렌즈를 8시간동안 착용하였을 때 렌즈에 부착된 단백질의 양은 렌즈 표면의 접촉각과 총 가시광선 투과도에 큰 변화를 주지는 않았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.281-284
• /
• 2007

Recently, we have developed p-i-n a-Si:H single junction thin film solar cells with RF (13.56MHz) plasma enhanced chemical vapor deposition (PECVD) system, and also successfully fabricated the mini modules ($>300cm^2$), using the laser patterning technique to form an integrated series connection. The efficiency of a mini module was 7.4% ($Area=305cm^2$, Isc=0.25A, Voc=14.74V, FF=62%). To fabricate large area modules, it is important to optimise the integrated series connection, without damaging the cell. We have newly installed the laser patterning equipment that consists of two different lasers, $SHG-YVO_4$ (${\lambda}=0.532{\mu}m$) and YAG (${\lambda}=1.064{\mu}m$). The mini-modules are formed through several scribed lines such as pattern-l (front TCO), pattern-2 (PV layers) and pattern-3 (BR/back contact). However, in the case of pattern-3, a high-energy part of laser shot damaged the textured surface of the front TCO, so that the resistance between the each cells decreases due to an incomplete isolation. In this study, the re-deposition of SnOx from the front TCO, Zn (BR layer) and Al (back contact) on the sidewalls of pattern-3 scribed lines was observed. Moreover, re-crystallization of a-Si:H layers due to thermal damage by laser patterning was evaluated. These cause an increase of a leakage current, result in a low efficiency of module. To optimize a-Si:H single junction thin film modules, a laser beam profile was changed, and its effect on isolation of scribed lines is discussed in this paper.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.256-259
• /
• 2005

Analysis of behavior pattern and thermal response during bathing and showering provides important fundamental data when developing an automatic bathing/showering system. The behavior pattern and physiological changes during bathing/showering were measured und analyzed for the aged male group. We recorded the volunteers showering at front, back, left and right view using four CCTV cameras in order to study the behavior pattern during showering. The photographic data were analyzed by counting the frequencies of body contact and identifying zones where hands could reach. In order to study the thermal response, we measured the blood pressure (B.P), heart rate (H.R), body temperature (B.T.), breathing rate (B.R) for the different water temperatures and the locations of immersion for the young and old age groups. The results showed that the frequencies of body contacts were varied for different body sections. Also there were some body sections where hands could not be reached because of reduced pliability and muscular strength of the aged group. But we observed rather uniform body contact frequencies when a towel was used. In partial immersion bath experiments, we observed the changes of B.P. H.R and B.T in the case of young and old age groups, and the changes were more significant in the young age group.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.44-53
• /
• 2021

As environmental issues have emerged worldwide, emission gas regulations have been strengthened. In the construction machinery sector, studies have been actively conducted to utilize the power source of electric motors owing to the increasing demand for zero emissions. In this study, the gear specifications of an electric axle for construction machinery were selected by considering the specifications of the motor, gear tooth contact pattern, and face load factor. The gear strength evaluation was performed at the system level using the simulation model. The bending and contact strength of the spiral bevel gears and the bending strength of the planetary gear set showed a safety factor of 1 or more. However, the contact strength of the planetary gear set showed a safety factor of 0.92. Conservative results were derived by performing the analysis under the rated load condition of the motor. However, the ratio of the equivalent torque to the rated torque of the motor was 45% or less, hence, it was determined that no difficulties should arise regarding the durability of the axle.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.45-50
• /
• 2012

The plate fin and tube type of heat exchanger is widely used in air conditioner, and the heat exchanger is assembled by the mechanical expansion of copper tubes and fastening the aluminum fin. The objective of the present study is to investigate how the mechanical expansion of copper tube affects on the heat transfer performance of a plate fin and tube type heat exchanger. This study has been performed by experimental and numerical methods. The numerical and experimental results show that the tube expansion ratio has a influence on the heat transfer performance. Within the tested expansion ratio, the contact pressure shows the peak value and it decreases as the expansion ratio increases. Air-side heat transfer coefficient increases until the expansion ratio reaches 1.23, and then decreases with the similar pattern to the contact pressure. Also, contact heat transfer coefficient shows the maximum when the contact pressure is highest as well as the air-side heat transfer coefficient.