• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.462-468
• /
• 2006

Antibiotics are manufactured and used for specific physiological functions, hence they may exert adverse ecological consequences when they are in contact with nontarget organisms. In the last decade, many reports have been made on the occurrences of various antibiotic compounds in surface water, and their potential impact to the environment has become an increasing concern. This study was conducted to prioritize antibiotic substances with potential environment risk in Korea. Human use antibiotics with an EIC (Expected Introduction Concentration) value greater than $1{\mu}g/l$, US FDA's action limit criteria, were selected. In order to calculate a worst-case EIC for each substance, annual production volume (in kg) of each antibiotic substance was derived using the Korea Pharmaceutical Manufacturers Association (KPMA)'s monetary database. Sixteen substances were preliminarily selected. The EICs of the 16 antibiotic substances were refined with the excretion rate of the parent substances. Ten antibiotic substances were identified to have EIC-corrected greater than $1{\mu}g/l$, which include Amoxicillin ($15.8{\mu}g/l$), Cefaclor ($10.1{\mu}/l$), Roxithromycin ($4.2{\mu}g/l$), Cephradine ($4.5{\mu}g/l$), Cefatrizine ($2.6{\mu}g/l$), Cefadroxil ($3.3{\mu}g/l$), Aztreonam ($2.3{\mu}g/l$), Ceftazidime ($2.8{\mu}g/l$), Ribostamycin ($1.3{\mu}g/l$), and Ceftezole ($1.3{\mu}g/l$). Additional risk assessments for these antibiotic substances are suggested.

• The Journal of the Korea Contents Association
• /
• v.20 no.2
• /
• pp.360-370
• /
• 2020

In order to understand the factors related to the unmet dental needs, analysis was performed using the data of community health survey data. Targeting population of 214,861 aged 25 and over demographic factors, socioeconomic factors, social support, social environmental factors, social and physical environmental factors, and factors related to necessary unmet dental needs visit it was confirmed. The lower the age, the higher the income level, the lower the education level, the less contact with relatives and friends, the less likely they are to participate in relatives and leisure activities, dissatisfied with sociophysical environment(safety level, natural environment, living environment, public transportation, medical services) the higher unmet dental needs. It was confirmed that not only demographic and socioeconomic factors but also social support, social environmental factors, social and physical environmental factors had a statistically significant impact on the need of unmet dental needs. Future research that includes policy factors as social determinants of health will be needed as a way to increase the unmet dental needs.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.432-438
• /
• 2016

Whiplash injuries in low-speed rear-end collisions are the most common injuries and has been a social issue in insurance industry, such as excessive medical claim costs along with exaggerated injuries of victims and treatments from hospitals. According to the Korea Insurance Development Institute reports, the number of claims by rear-end collision was approximately 703,000, which accounts for 53.6 % of the total car-to-car collisions in 2014. Part of the neck injury claims in the Korea car insurance was approximately 28.3 %. Furthermore, approximately 98.4% of the injured persons in rear-end collisions sustained minor injuries under AIS2. In order to improve this situation as well as find out the severity of neck injuries from rear-end collision, the Korea Automobile Insurance Repair Research and Training Center conducted car-to-car rear-end crash tests that striking vehicles(SUV) collided into different sizes of struck-vehicles(small, middle, and large sedan) at the impact speeds of 8 km/h ~ 16 km/h. In order to analyze the whiplash injury, the BioRID-II was seated in each struck-vehicles, and the neck injury criteria(NIC), head contact time, maximum vehicle accelerations, and mean vehicle accelerations were calculated from values from the accelerations of the dummy and the struck-vehicles.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.344-351
• /
• 2010

Recently the demand for hospital care, while gradually increasing to expand the variety of new and carries on with the competition is faced. The quality of hospital services in this reality retain the right to survival and development of the hospital, the hospital, as well as the capabilities of the original competitive assessment is a key factor. Therefore, this study focused on hospital quality of service to the customer service center into contact with the contents of the results were comprehensive evaluation. In this study, a variable that is committed, the hospital service quality and customer satisfaction, and relationships about reuse of the hospital, the hospital's strategic management could be because of the foundation. The study quality of hospital services and customer satisfaction, and reuse of the impact of the relationship between the quality of service in the hospital, the patient happy, very significant according to the reuse of. A customer-centric future, these results provide guidelines for hospital management can be applied to further strengthen competitiveness are expected.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2009

Most hard disk drives that apply the ramp load/unload technology unload the heads at the outer edge of the disk while the disk is rotating. The load/unload includes the benefits as like an increased areal density, a reduced power consumption and an improved shock resistance. A lot of papers investigating the effects of the various load/unload parameters such as a suspension tab, a limiter, a ramp and air-bearing surface designs have been published. However, in previous researches, an effect of the suspension is not considered at each load/unload step. In this paper, we focus that a variation of the state matrix affects the load/unload performance on based on a state matrix that is a stiffness matrix of the suspension. Because the state matrix is related to the suspension at each load/unload step, to change the state matrix means the structural change of the suspension. Therefore, we investigated a range of a pitch static attitude(PSA) and a roll static attitude(RSA) for load/unload performance. We also analyzed an effect of the variation of the state matrix a range of load/unload velocity occurred a slider-disk contact. We determined the variation of the state matrix to improve the load/unload performance through comparison of each factor of state matrix.

• Physical Therapy Korea
• /
• v.12 no.1
• /
• pp.28-35
• /
• 2005

The purpose of this study was to determine whether gender differences existed in knee valgus kinematics in college students when performing a vertical drop landing. The hypothesis of this study was that females would demonstrate greater knee valgus motion. These differences in knee valgus motion may be indicative of decreased dynamic knee joint control in females. This study compared the initial knee valgus angle and maximum knee valgus angle at the instant of impact on vertical drop landings between healthy men and women. In this study, 60 participants (30 males, 30 females) dropped from a height of 43 cm. A digital camera and two-dimensional video motion analysis software were used to analyze the kinematic data. There was significant difference in the mean knee valgus angle at initial contact landing between the two groups (Mean=$7.88^{\circ}$, SD=$4.24^{\circ}$ in males, Mean=$12.93^{\circ}$, SD=$2.89^{\circ}$ in females). The range of knee valgus angle on landing (Mean=$3.25^{\circ}$, SD=$5.72^{\circ}$ in males, Mean=$11.44^{\circ}$, SD=$6.39^{\circ}$ in females) was differed significantly (p<.05). The maximal angle of knee valgus on landing (Mean=$10.91^{\circ}$, SD=$6.89^{\circ}$ in males, Mean=$24.25^{\circ}$, SD=$6.38^{\circ}$ in females) was also differed significantly (p<.05). The females landed with a larger range of knee valgus motion than the males and this might have increased the likelihood of a knee injury. The absence of dynamic knee joint stability may be responsible for increased rates of knee injury in females. No method for accurate and practical screening and identification of athletes at increased risk of ACL injury is currently available to target those individuals that would benefit from neuromuscular training before sports participation.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.4
• /
• pp.213-220
• /
• 2020

In the present paper, implosion responses of two adjacent cylindrical tubes under external hydrostatic pressure were experimentally investigated. The cylinder models were fabricated of aluminium alloy 6061-T6 commercial tubes. In the experiment, a pair of two-cylinders were placed inside of a support frame in a medium-size pressure chamber, whose design pressure was 6.0MPa. The distance between the two-cylinders was 30 millimeter measured from outer shell at the mid-length. The implosion tests were performed with water and compressed nitrogen gas as the pressurizing media. The ambient static pressure of the chamber and local dynamic pressure near the two-imploded models were measured simultaneously. It was found that the energy released during an implosion from the first, weaker cylinder triggered the instability of the second, stronger cylinders. In other words, the resulting shock wave of the first implosive impact from the weaker cylinder could cause the premature failure of the neighboring stronger cylinders. The non-contact implosion phenomena from the two-cylindrical tube were clearly observed.

• Composites Research
• /
• v.24 no.6
• /
• pp.7-11
• /
• 2011

Polyurethane oligomers (PUOs) such as UA8297, UP127 and EB8200 were utilized to enhance the anti-bullet property of Dyneema$^{(R)}$/vinylester composites. First, prepregs of PUO and vinylester (XSR10) were prepared via spray coating on Dyneema$^{(R)}$ fabric at 21 % resin content (by volume). In addition, spray coating and film lamination were also carried out with a mixture of XSR10/PUO for selected PUOs. Next, the prepregs were dried at RT for 1-2 h and then at $100^{\circ}C$ for 30 min to remove the solvent and to provide partial cure when necessary. The prepregs were stacked in 24 layers and cured at $120^{\circ}C$ for 5 min under the contact pressure and for additional 25 min at 150 $kg/cm^2$. Finally, the anti-bullet properties of composite samples were evaluated by measuring $V_{50}$ with simulated fragment projectile (SFP, 17 gr). The results showed a 6.5 and 9.0 % increase of $V_{50}$ with UP127 and EB8200, respectively.

• Korea Journal of Hospital Management
• /
• v.7 no.1
• /
• pp.105-120
• /
• 2002

In the United States, the prospective payment system(PPS), under which diagnosis related groups (DRGs) are used to reimburse hospitals for the care of Medicare patients since 1983, Study results showed that the PPS is having a major impact on the quantity of services especially of hospital length of stay. The PPS has increased the likelihood that a patient will be discharged home in an unstable condition and the use of nursing homes or long term care facilities increased. Still, it is insufficient to conclude that the PPS has decreased the Medicare total expenditure, but relatively sufficient to conclude that the quality of care hasn't changed. The maintenance of the quality resulted from the systemic "check-and-balance" composed of three factors; (1) The doctors are reimbursed based on the fee-for-service system, (2) hospitals contact with doctors under the attending system, and (3) there are some public hospitals. In Korea, the reimbursement for hospitals and doctors are not divided, the hospitals have doctors as employees, and 90% of hospitals are private. These differences may weaken the "check-and-balance" existing in the U.S. system. And there are few long term care facilities and the diagnostic coding system using in pilot test are not suitable for Korean situation. In conclusion, for successful implementation of the DRG payment system in Korea, the government should establish the "check-and-balance" system in the health sector to make sure the quality of care before the implementation.