• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.425-430
• /
• 2000

In the analysis of deformation in which the stiffness is greatly different between the adjacent materials, the desired results have been obtained by using the interface element method compared with those secured by the conventional method of the concept of continua. This study deals with the deformation analysis of soft foundation by the introduction of interface element. The physical conditions of interface element are divided into three categories by Mohr-Coulomb failure criterion ie. sliding, separation, and contact. Finally the accuracy of the program proposed in this paper is proved highly accurate by performing the comparison of the theoretical values numerical results of a model element with simplified boundary conditions.

• Structural Engineering and Mechanics
• /
• 제7권6호
• /
• pp.575-588
• /
• 1999

A boundary element method is applied to the analysis of crack trajectory in materials with complex microstructure, such as discontinuously reinforced composite materials, and systems subjected to complex loading, such as indentation. The path followed by the crack(s) has non-trivial geometry. A study of the stress intensity factors and fracture toughness of such systems must therefore be accompanied by an analysis of crack trajectory. The simulation is achieved using a dual boundary integral method in planar problems, and a single boundary integral method coupled with substructuring in axisymmetric problems. The direction of crack propagation is determined using the maximum mechanical energy release rate criterion. The method is demonstrated by application to (i) a composite material composed of components having the elastic properties of aluminium (matrix) and silicon carbide (reinforcement), and (ii) analysis of contact damage induced by the action of an indenter on brittle materials. The chief advantage of the method is the ease with which problems having complex geometry or loading (giving rise to complex crack trajectories) can be treated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.157-167
• /
• 2020

The purpose of this study is to analyze the relationship between the occurrence of intermediate peak and time duration, and to conduct a review for the causes of the intermediate peak. In this test, ice impact tests were conducted using a bow side shell frame and ice specimen. A total of 70 samples were manufactured. Two types of ice specimen with relatively different surface conditions were used. The criterion for dividing the two types of ice specimen was the different exposure times to room temperature after freezing. This experiment was conducted for each parameter in order to reproduce the actual icebreaking situation. As a result of the analysis, the intermediate peak in the ice load signal have been found to be caused by mechanisms by which the inner surface of broken ice contact with hull immediately after the initial hitting point of ice has been broken.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.101-107
• /
• 1997

A sectional analysis of auto-body panel stamping is carried out by using the rigid-plastic FEM based on the membrane theory. The auto-body panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion and its associated flow rule. A method of contact treatment is proposed in which the skew boundary condition for arbitarily shaped tools is successively used during iteration. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the composition of the two-dimensional section analysis gives almost the same results as the full three-dimensional analysis.

• 한국산업융합학회 논문집
• /
• 제27권4_2호
• /
• pp.973-980
• /
• 2024

Dependence of dynamic fracture path on loading velocity was observed from experimental results based on the three point bending fracture in cast iron. In this study, 3D and 2D numerical simulations are used to evaluate singular stress fields near crack tip and fracture mechanics parameters. Moving finite element technique, 2D and 3D Delauney automatic mesh generation and contact-noncontact evaluation is introduced into the numerical method. Dynamic fracture thoughness is decreased with increase of impact loading velocity. Fracture mode-ratio corresponds to initial kink angle of fracture path. The numerical result shows that the maximum hoop stress criterion cannot be applied to dynamic fracture of cast iron.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.158-166
• /
• 2009

Hoek-Brown 암석에서 응력에 의해 발생되는 균열의 전파특성을 수치해석적으로 분석하기 위한 기초연구로서 탄성균열의 균질화 기법이 제안되었다. 균열의 개시조건으로 Hoek-Brown 경험식이 이용되었고, 균열의 방향 탐색을 위해 임계면법이 이용되었다. 균열물질과 무결암으로 구성된 대표체적에 대해 체적평균 응력 및 변형률 개념을 적용하여 균열과 신선암의 역학적 특성을 균질화시킴으로써 등가 이방성매질의 구성관계식을 유도하였다. 제안된 균질화모델을 포트란 코드로 작성하여 상업유한요소 코드인 COSMOSM에 이식하였다. 제안된 수치해석모델의 적합성을 검증하기 위하여 2차원 평면변형률조건에서 수치 일축압축시험을 실시하였다. 모델 상하부 가압면의 구속조건을 달리한 2가지 해석모델을 선정하여 구속조건이 일축압축시험편의 변형 및 파단면 형성형태에 미치는 영향이 분석되었다. 균열의 균질화를 고려한 수치 일축압축시험 결과는 실제 실험에서 발생되는 형태와 유사한 변형거동 및 파단면 형성 특성을 잘 나타내었다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.843-852
• /
• 2020

Among the many packaging materials used in cushion packaging, there is a lack of optimum design for packaging trays and cushion pads used in pear packaging for export and domestic distribution. It causes over-packaging due to excessive material input, and can be solved by applying various parameters needed to optimize the design of the packaging tray and cushion pad considering the packaging material and the number of pears in the box. In the case of a cushion pad for pears, the economic efficiency of material and thickness should be considered. Therefore, it is possible to design a packaging tray and cushion pad depending on eco-friendly packaging materials (PLA, PET) used by applying appropriate design parameters. The static characteristics of the materials used for the packaging of pears were analyzed using FEA (finite element analysis) simulation technique to derive the optimal design parameters. In this study, we analyzed the contact stress and deformation of PET, PLA tray (0.1, 0.5 1.0, 1.5 and 2 mm) and PET foam (2.0, 3 .0 and 4.0 mm) with pears to derive appropriate cushion packaging design factors. The contact stress between the pear and PET foam pad placed on PLA, PET trays were simulated by FEA considering the bioyield strength (192.54±28 kPa) of the pears and safety factor (5) of packaging design, which is the criterion of damage to the pears. For the combination of PET tray and PET foam buffer pad, the thickness of the PET foam is at least 3 mm, the thickness of the PET foam is at least 1.0 mm, the thickness of the foam is at least 2 mm, and if the thickness of the PET tray is at least 1.5 mm, the thickness of the foam is at least 1 mm, suitable for the packaging design. In addition, for the combination of PLA tray and PET foam pad, the thickness of the PET foam was not less than 2 mm if the thickness of the PLA tray was 0.5 mm, and 1 mm or more if the thickness of the PLA tray was not less than 1.0 mm, the thickness of the PET foam was suitable for the packaging design.

• 대한기계학회논문집A
• /
• 제41권5호
• /
• pp.375-380
• /
• 2017

본 논문은 한국원자력연구원에서 개발 중인 소듐냉각 고속로 핵연료의 연료봉 하단 마개에 있는 관통구멍과 마운팅 레일의 원기둥 형상과의 접촉부에 발생하는 접촉 손상을 예측하기 위한 가속시험 방법을 연구한 것이다. 가속시험 조건으로서 연료봉의 유체유발진동수 및 진폭을 유한요소 해석을 통하여 구하였다. 약 35000 시간의 연료봉 수명기간을 고려한 가속시험 시간을 결정하기 위해 일반 기계부품류의 신뢰성 평가 방법을 적용하였으며, 이때 가장 보수적인 형상 모수와 원자로 내에서의 연료봉 파손허용 개수 기준 및 연료봉 피복관 재료인 HT-9강의 피로수명 데이터를 이용하였다. 시편의 개수를 5개로 하였을 때, 최종적으로 계산된 가속 시험시간은 각 시편 당 16.5시간이었다. 가속시험 후 전체 시편에 어떠한 접촉손상도 관찰되지 않을 때 연료봉의 수명기간 중 $B_{0.004}$ 수명이 신뢰수준 99%로 보장되는 것으로 평가하였다.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.105-115
• /
• 2020

This study compares the difference of fit factors (FF) and visual acuity according to masks and eyeglasses preferences for 54 participants. We the precautions and behaviors of discomfort when wearing masks of eyewear wearers. Contact lens discomfort and priority action of complaints was investigated Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA). We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity(VA) test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis(P=0.05) When wearing the mask preferentially, fit factor(FF) was high according to the step of glasses fitting parameter. on the other hand, when the glasses first choice, the visual acuity(VA) was high. there was no significant difference. In the case of fit factor (FF), mask first choice/ glasses first choice is OH (p=0.671/ p=0.332), VD (p=0.602/ p=0.571) and PA (p=0.549/ p=0.607). Visual acuity (VA), mask first choice/ glasses first choice is OH (p=0.753/ p=0.386), VD (p=0.815/ p=0.557) and PA (p=0.856/ p=0.562). The workers of workplace and office chose glasses but occupational health workers and students chose mask. In case of discomforts, it was suggested to remove the mask and tolerate discomforts. The main discomforts and usual action of lens were dryness, hyperemia, foreign body sensation, ophthalmodynia, decreased vision and glasses wearing. Therefore, it is necessary to develop a mask wearing method education program considering glasses fitting and develop a hybrid model that minimizes inconvenience when wearing glasses and a mask at the same time.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.251-258
• /
• 2018

최근 자동차 교통량의 증가로 인해 차량 추돌사고가 급증하여 이에 따른 승객의 목상해가 증가해왔으며, 이를 방지하기 위한 자동차 시트의 설계적인 주안점을 고려하여 컴퓨터 시뮬레이션 기술을 확대 이용한 자동차충돌 해석연구가 활발히 진행되고 있다 본 연구에서는 인체모형 BioRID II 더미를 이용한 차량승객거동해석을 위한 MADYMO 프로그램을 사용하여 차량속도 16 km/h 운전조건의 후방추돌시 시트의 착좌자세인 백세트의 변화에 따른 승객의 목상해를 예측하였다. 그 결과로, 백세트가 짧을수록 접촉시작시간은 단축되지만 접촉완료시간은 거의 동일함을 알 수 있었고, T1 가속도는 백세트가 넓을수록 가속도는 증가함을 나타냈다. 또한 백세트가 넓을수록 인장력은 증가하고, 머리가 머리지대에 닿는 순간의 속도가 빨라짐으로써 목상해지수(NIC)는 증가함을 보였다.