• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.29-37
• /
• 2013

PURPOSES : This study aims to review the possibility of developing a road snow-melting system that can prevent slip accidents by maintaining a constant temperature of the winter roads and enhance performance of structures, including improvement of compressive strength by mixing carbon nanotube (hereafter referred to as CNT) with cement paste, the basic material. METHODS : To achieve the above purpose, an experiment was conducted by mixing power-type CNT and wrap-type CNT up to cement paste formulation by weight of 0.0wt%~4.1wt% in accordance with "KS L ISO 679(of cement strength test method)", and compressive strength was measured at 28 days of curing. In addition, the volume resistivity of the specimen was measured to test thermal and electrical characteristics, and the rate of temperature changes in specimen surface by power consumption was measured by passing electricity through the cross-sections of the specimen. Meanwhile, the criteria for checking the performance as a road snow-melting system was determined as volume resistivity of $100{\Omega}{\cdot}cm$ or less. RESULTS : A comparative analysis between specimen with 0wt% CNT content in plain status and specimen containing various types of CNTs was carried out. From its results, it was found that compressive strength increased approximately 19%, showing the highest rate when 0.2wt% of wrap-type CNT was contained, but volume resistivity of $100{\Omega}{\cdot}cm$ or less appeared only in specimens containing more than 0.2wt% CNT. In addition, it was observed that the surface temperature increased by $4.62^{\circ}C$ per minute on average in specimens containing 3.2wt% CNT. CONCLUSIONS : In this study, CNT was examined as an underlying material for a road snow-melting system, and the possibility of developing the road now-melting system was reviewed by conducting various experiments using CNT-Cement composites. From the experimental results, the specimens were found to have a superior performance when compared to the existing road snow-melting systems that place the heat transfer medium such as copper on the road. However, satisfactory strength performance were not obtained from the specimen containing CNT(2.0% or more) that functions as a heating element, which leads to the need for reviewing methods to increase the strength by using plasticizer or admixture.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.1
• /
• pp.11-19
• /
• 2016

Objectives: Exposure to volatile organic compounds such as trichloroethylene(TCE) and perchloroethylene(PCE), along with Agent Orange, that were issued around Camp Carroll US Army Base situated in Waegwan, Chilgok-gun, Gyeongsangbuk-do Province, Korea. The main objective of this study was to assess the exposure to TCE and PCE of residents of the area surrounding Camp Carroll. Methods: The TCE, PCE and trichloroethanol(TCEOH) concentrations in blood and trichlroroacetic acid(TCA) and TCEOH concentrations in urine were measured and analyzed in a total of 1,033 residents around Camp Carroll. TCA and TCEOH are metabolites of TCE and PCE, respectively. The information on demographic characteristics and exposure variables in relation to underground water were obtained through a questionnaire completed by the subjects. Results: TCE, PCE and TCEOH concentrations were not detected in blood. Detection rates of TCA and TECOH concentrations in urine were 98.5% and 36.6%, respectively. Creatinine-corrected average TCA and TCEOH concentrations were $12.23{\pm}23.81{\mu}g/g$ and $0.66{\pm}4.31{\mu}g/g$, respectively. A significant difference was not shown between the drinking group and no drinking group for underground water, which was assumed as a potential route of exposure to TCE and PCE through the consumption of ground water. However, females drinking ground water showed a significantly higher mean level of TCA in urine than did males. There was no significant difference according to drinking ground water as a potential source of exposure to TCE and PCE in residents around Camp Carroll. Conclusions: Considering the statistical analysis of factors affecting exposure to TCE and PCE in ground water along with previous reports, TCA in urine as exposure to TCE and PCE might not be appropriate because it is found in chlorinated drinking water. Therefore, TCA concentration in urine may be the result of drinking of chlorinated water.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.121-125
• /
• 2007

물 수요예측을 실시함에 있어서 사회 경제의 장래동향과 도시의 특성 및 발전 동향을 반영하여 수행하여야 한다. 그러나 지금까지의 관행으로는 수도계획에서 사용할 수 있는 실사용량에 대한 조사와 통계가 이루어지지 않고 있다. 실제 현장에서 얻은 자료를 토대로 하여 수도계획 및 설계에 사용할 수 있는 신뢰성 있는 설계인자의 도출이 필요하다. 본 연구에서는 급수지역의 각 조사 가정의 물 사용량을 실측 조사하여 얻어진 자료를 토대로 하여 물 수요 구조의 변화를 파악할 수 있는 수단의 하나로 가정의 수돗물 사용특성과 경제적 요인에 따른 가정용수의 사용특성 경향을 파악하고자 하였다. 가정에서 사용된 용수량의 조건별 경향성을 분석하기 위하여 한국수자원공사에서 2002년부터 2006년까지 3년여에 걸쳐 표본 집단이 되는 전국 140개 가구에 유량계를 설치하여 유량 자료를 획득하였고, 설문조사를 실시하여 각 가정의 물 사용 특성인자들을 조사하였다. 이 자료를 대상으로 비교적 자료의 신뢰성을 높이기 위한 자료의 선별과정을 거쳤다. 이렇게 선별된 자료들을 경향성 분석에 쓰이는 Mann-Kendall test와 Spearman's Rho test를 이용하여 분석하였다. 그 결과를 바탕으로 가정 용수 소비패턴의 증가 감소에 영향을 끼치는 인자들을 추출하였다. 실측자료를 분석을 통하여 나타난 결과들을 바탕으로 용수 수요처의 조건별 특성을 분석하고, 이를 활용한 생활용수 예측모형을 개발함으로써 합리적인 수요예측에 의한 용수수요의 과다예측 우려를 해소하고, 경제적 수도시설계획을 수립하는 등 과학적 물 수요관리 정책 수립을 위한 의사결정도구가 제공될 수 있다.c}$C의 저온에서 저장한 감자는 $20^{\circ}$C에서 저장한 감자보다 발아의 지연과 함께 낮은 PGA증가율을 보였다.다 높았으며, 전반적인 선호도의 경우 G3(1.5%)를 가장 선호하는 것으로 나타났다. 백년초 분말 첨가 도토리묵의 경우 색상은 0.5% 첨가한 O1이 가장 높은 값을 나타냈으며, 외관은 1.5% 첨가한 O3가 가장 높은 값을 보였다. 향미와 신맛의 경우는 백년초 분말의 첨가량이 증가됨에 따라서 유의적으로 증가했다(p<0.001). 씹힘성, 탄력성, 견고성의 경우는 대조군이 가장 높았으며, 백년초 분말 첨가량이 증가함에 따라 유의적으로 낮아졌다(p<0.001), 떫은맛의 경우는 백년초 분말에 의한 신맛의 영향으로 1% 백년초 분말이 첨가된 O2 가장 높게 나타났다. 전반적인 선호도는 0.5% 백년초 분말이 첨가된 O1이 가장 높게 나타났다. 따라서 녹차와 백년초의 기능성을 살린 도토리묵을 실용화시키는 효과적인 배합비는 녹차 분말 1.5% 첨가와 백년초 분말 첨가 0.5%가 바람직한 것으로 보이며 백년초 분말은 1%까지도 가능한 것으로 나타났다. 그러므로 기능성 식품 소재로써 도토리묵에 녹차와 백년초 분말을 첨가하는 것은 충분히 활용할만한 가치가 있다고 사료된다.론적으로, 비육돈 사료 내 3.32%의 호맥 사일리지의 혼합급여는 혈액 내 코티졸 함량, 도체육의 명도와 황색도, 지방산 조성 및 영양소 소화율에 영향을 미치는 것으로 사료되나 이에 대한 보다 많은 연구가 필요할 것으로 판단된다.니티와 공원과의 관계로 공원 설계와 관리에 있어서 영국에서는 커뮤니티가 직접 고객(client)으로서 역

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1554-1564
• /
• 2007

In apparel industry, the production of clothing for the global market, has it#s origin in its characteristics depending on hands on working style, according to the globalization of a fashion industry. These days, however, the globalized production is unable to keep pace with the short cycle of production due to the unpredictable change of the taste or demands in the local area, as a result, the industry has come to take a focus on the production and consumption in the circumscribed region. In this stream, the northeastern area, specially, Dalian which is renowned for a center of fashion was designated as a city of this study as a representative. The cultural, racial and geographical uniqueness, asks for the analysis, based on the individual local area on the part of Korean fashion company desiring to launch into China fashion market. The purpose of this thesis is to analyse the style, color, and items of street fashion in Dalian. I would contribute to the understanding the preference of fashion in northeastern area, thereby, affording a fundamental resources for designing strategies for Korean fashion brands in China. The period of investigation is about 5 weeks from 14 May 2006 until 18 June 2006, with combined use of camcorder and digital camera. The site was Victory Shopping Plaza, in center of city, also with Mycal, Ansung, Dasang department store situated in the Economic Development area. The result of this study are as follows: 1. Preferred clothing styles are casual styles(68%) rather than formal styles(32%). In the casual styles, sports casual(36.0%), character casual(29.5%), jean casual(2.6%) were listed. All kinds of clothes are tightly fitted due to the stretched fabric and knit fabric. 2. Preferred colors are white(31.1%), red(16.6%), black(15.8%) khaki(7.8%) and blue(7.6%) for tops, and black(34.6%), blue(27.2%), white(15.4%), brown(14.6%) for bottoms. 3. Preferred clothing items are T-shirt(36.5%), jumper(33.6%), jacket(20.0%), blouse(8.7%), etc.(1.2%) for tops, pants(91.4%), skirts(8.6%) for bottoms. In the pants, cigarette pants(34.6%), bell bottom pants(21.0%), cargo pants(19.9%), straight pants(15.9%) were listed respectively. In the skirts, flare skirt(3.9%), tight skirt(2.2%), semi tight skirt(1.7%), pleats skirt(0.8%) were listed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.6-13
• /
• 2006

Tin doped indium oxide(ITO) and Al doped zinc oxide(ZnO:Al) films, which are widely used as a transparent conductor in optoelectronic devices, were prepared by using the capacitively coupled DC magnetron sputtering method. ITO and ZnO:Al films with the optimum growth conditions showed each resistivity of $1.67{\times}10^{-3}[{\Omega}-cm],\;2.2{\times}10^{-3}[{\Omega}-cm]$ and transmittance of 89.61[%], 90.88[%] in the wavelength range of the visible spectrum. The two types of 5 inch-PDP cells with ZnO:Al and ITO transparent electrodes were made under the same manufacturing conditions. The PDP cell with ZnO:Al film was optimally operated in the mixing gas rate of Ne(base)-Xe(8[%]), and at gas pressure of 400[Torr]. It also shows the average measured brightness of $836[cd/m^2]$ at voltage range of $200{\sim}300$[V]. Luminous efficiency, one of the key parameter for high brightness and low power consumption, ranges from 1.2 to 1.6[lm/W] with increasing frequency of ac power supplier from 10 to 50[Khz]. The brightness and luminous efficiency are lower than those with ITO electrode by about 10[%]. However, these values are considered to be enough for the normal operation of PDP TV.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1999.11a
• /
• pp.102-144
• /
• 1999

The major problems of food crop cultivation in Korea are low yield of most crops except rice. inefficient cultivation techniques for aged farmers. and low international competibility. Therefore, development of cultivation techniques of food crops should aim the yield. quality improvement, labor reduction and production cost. The primary issue for increasing the yield of soybean, barely and wheat is to reduce the yield gap between the farmer's yield and recommended ones of experiment station. More advanced cultivation techniques needs to be developed. and/or the conventional breeding methods to be reconsidered. The newly developed labor-saving mechanized technique needs to reduce labor hours , and the cost of agricultural implements and machineries. In other words the labor-saving mechanized technique should be developed based on the improvement of total farming system as well as systemic fundamental innovation of cultural methods. The efficiency of solar energy use in food production of Korea in 1997 is as low as $0.52{\%}$ so there is much room to increase yield. It is recommendable that the concept of food Production should be changed to energy Producing efficiency Per unit area basis from volume and weight of food materials. Moreover, introduction of resonable cropping system is needed to increase yield of main crops, farmer's income, solar energy use efficiency, and decrease of land service expenditure. Current cropping system emphasized on economic crops. especially in vegetables , is not desirable for resonable use of arable land. stability of agricultural management and staple food crop self-sufficiency ratio. It is desirable to increase food crops . that are energy of carbohydrate and protein rich and land dependent crops. in cropping system. And the agronomist should develop the cultural methods to replace food crops for food self-sufficiency and stable farming management instead of economic crops in current cropping system. Low-input and environmentally-sound crop cultivation techniques, especially nitrogen-reducing culture technique which is directly related to food crop quality, also needs to be developed urgently. The extended cultivation of corn in upland and barely and wheat in lowland as a feed stuffs is recommended to prevent further decrease of food self-sufficiency ratio, which is mainly caused by the high reliance on imported feed grain. It is also considered that the calculation and presentation methods of standard agricultural income needs to be improved. The current calculation method uses unit land area of 10a regardless of crop kinds , characteristics of agricultural management and cultivation scale. So, it is apt to lead misunderstanding of farm income value. Therefore. it should show an income of average farmers for certain number of years. Research and developing system for food producing is not desirable because they are conducted currently individual crop and mono-culture basis. But actual agricultural income is usually earned by cropping system including upland and lowland. For example. the barley and wheat is usually cultivated in double cropping system. The cooperation among research institutes such as university agribusiness. government and farmers is indispensible. The public information and education on importance and consumption habit of food crops is necessary in Korean society to increase food self-sufficiency through nationwide cooperation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.283-291
• /
• 2013

Rice varieties with suitable flour-making quality are required to promote rice processed-food industry and boost rice consumption in Korea. 'Namil (SA)-flo1' is an advanced mutant line with floury endosperm which shows good flour-making quality under dry-milling process. Genetic analysis was carried out to localize the chromosomal region responsible for the floury endosperm of 'Namil (SA)- flo1'. By using 94 F2 progenies, which were derived from 'Namil (SA)-flo1' ${\times}$ 'Milyang 23', floury grains percentage was investigated as phenotypic data, and genotyping was conducted with 54 SSR markers. Association analysis showed that the target genetic region for floury endosperm is on middle-low region of chromosome 5. Through further association analysis with increased number of SSR markers on chromosome 5, we found that genotypic variation in RM164 explains 79.7% of the variation in floury grains percentage of F2:3 seeds. The floury endosperm locus was localized on 17.7-20.7 Mbp region of chromosome 5 and will be further analyzed for fine mapping and gene identification.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.950-958
• /
• 2013

The Lunar orbiter is expected to be inserted into a ~300km low Earth orbit using Korea Space Launch Vehicle-II(KSLV-II). After the states are successfully determined with obtained tracking data, the Trans Lunar Injection(TLI) burn has to be done at appropriate epoch to send the lunar orbiter to the Moon. In this study, we describe in detail the mission scenario of the Korean lunar orbiter from the launch at NARO Space Center to lunar orbit insertion(LOI) stage following direct transfer trajectory. We investigate the launch window including launch azimuth, delta-V profile according to TLI and LOI burn positions. We also depict the visibility conditions of ground stations and solar eclipse duration to understand the characteristics of the direct transfer trajectory. This paper can be also helpful not only for overall understanding of ${\Delta}V$ trend by changing TOF and coasting time but for selecting launch epoch and control parameters to decrease fuel consumption.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.42-47
• /
• 2015

While the oxygen content of gasoline for automobiles in Korea is regulated to less than 2.3 weight %, European and World-Wide Fuel Charter (WWFC) regulate it to less than 2.7 weight %. The oxygen content of oxygen-containing materials increases the octane number of the fuel due to the secondary combustion in the internal combustion engine. It has been reported to be effective in reducing emissions, such as CO, HC, which is caused by incomplete combustion. Before 2000s in the United States and Europe, there has been many researches about vehicle application of the changes in oxygen content of gasoline. However, there are not many domestic researches which reflect the improvement of the fuel quality and automotive technology. In this study, fuels of three different oxygen contents were applied to GDI and MPI engines. As a result, the changes of fuel consumption and emission gas were very similar depends of the oxygen content changes. The PN in GDI engine was decreased as the oxygen content was increased.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.115-123
• /
• 1999

A micro-gas sensor with heater and sensing electrode on the same plane was fabricated on phosphosilicate glass(PSG, 800nm)/$Si_3N_4$ (150nm) dielectric membrane. PSG film was provided by atmospheric pressure chemical vapor deposition(APCVD), and $Si_3N_4$ film by low pressure chemical vapor deposition (LPCVD). Total area of the fabricated device was $3.78{\times}3.78mm^2$. The area of diaphragm was $1.5{\times}1.5mm^2$, and that of the sensing layer was $0.24{\times}0.24mm^2$. Finite-element simulation was employed to estimate temperature distribution for a square-shaped diaphragm. The power consumption of Pt heater was about 85mW at $350^{\circ}C$. Tin thin films were deposited on the silicon substrate by thermal evaporation at room temperature and $232^{\circ}C$, and tin oxide films($SnO_2$) were prepared by thermal oxidation of the metallic tin films at $650^{\circ}C$ for 3 hours in oxygen ambient. The film analyses were carried out by SEM and XRD techniques. Effects of humidity and ambient temperature on the resistance of the sensing layer were found to be negligible. The fabricated micro-gas sensor exhibited high sensitivity to butane gas.