• 전기학회논문지
• /
• 제60권7호
• /
• pp.1438-1443
• /
• 2011

The increase of power capacity in the superconducting fault current limiter (SFCL) is essential for application into the power grid. To achieve this, when superconducting units were connected in series and parallel, the unbalanced quenching characteristics between superconducting units generated by different critical current behavior should be improved. In the transformer-type SFCL, the superconducting units connected in series could be simultaneously quenched by the connection of neutral lines between secondary coils and superconducting units. From this the consumed power in superconducting units was equally distributed. In addition, the more the turn ratio of the transformer was reduced, the more consumed power in the superconducting units was reduced by the decrease of the induction voltage generated in the superconducting units. From those results, the transformer-type SFCL using neutral lines could increase the power capacity of the SFCL by the equal power division into the superconducting units.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.1-6
• /
• 2009

The traditional demand prediction was based on the technique wherein electric power corporations made monthly or seasonal estimation of electric power consumption for each area and subscription type for the next one or two years to consider both seasonally generated and local consumed amounts. Note, however, that techniques such as pricing, power generation plan, or sales strategy establishment were used by corporations without considering the production, comparison, and analysis techniques of the predicted consumption to enable efficient power consumption on the actual demand side. In this paper, to calculate the predicted value of electric power consumption on a short-term basis (15 minutes) according to the amount of electric power actually consumed for 15 minutes on the demand side, we performed comparison and analysis by applying a 15-minute interval prediction technique to the average and that to the time series analysis to show how they were made and what we obtained from the simulations.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.232-238
• /
• 2015

This work describes the development of a D-band (110-170 GHz) signal source based on a SiGe BiCMOS technology. This D-band signal source consists of a V-band (50-75 GHz) oscillator, a V-band amplifier, and a D-band frequency doubler. The V-band signal from the oscillator is amplified for power boost, and then the frequency is doubled for D-band signal generation. The V-band oscillator showed an output power of 2.7 dBm at 67.3 GHz. Including a buffer stage, it had a DC power consumption of 145 mW. The peak gain of the V-band amplifier was 10.9 dB, which was achieved at 64.0 GHz and consumed 110 mW of DC power. The active frequency doubler consumed 60 mW for D-band signal generation. The integrated D-band source exhibited a measured output oscillation frequency of 133.2 GHz with an output power of 3.1 dBm and a phase noise of -107.2 dBc/Hz at 10 MHz offset. The chip size is $900{\times}1,890{\mu}m^2$, including RF and DC pads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1818-1820
• /
• 2003

In this study, we developed friendly-environment device through various applications of pulse power system and studied research about pulse energy transfer characteristics. We have studied the mutual relation between characteristics of the load impedance and consumed power of the pulse power system. The consumed power means electrical power from the wall plug. For changing the load impedance, we could change elecrode length. As results, we can get electrical characteristics between pulse generator and load. When the pulse energy was triggered the microbes, caused waste water, they were almost removed in the waste water.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1789-1797
• /
• 2017

It is necessary to charge electric vehicles in order to drive them. Thus, it is essential to have electric vehicle charging facilities in place. In the case of a household battery charger, the power similar to that consumed by a household with a basic contract power of 3kW is consumed. In addition, many consumers who own an electric vehicle will charge their vehicles at the same time. The simultaneous charging of electric vehicles will cause the load to increase, which then will lead to the imbalance of supply and demand in the distribution system. Thus, a smart charging scheme for electric vehicles is an essential element. In this paper, simulated conditions were set up using real data relating to Korea in order to design a smart charging technique suitable for the actual situation. The simulated conditions were used to present a smart charging technique for electric vehicles that disperses electric vehicles being charged simultaneously. The EVs and Smart Charging Technique are modeled using the Electro Magnetic Transients Program (EMTP).

• 한국기후변화학회지
• /
• 제7권1호
• /
• pp.95-101
• /
• 2016

This study measured the amount of electricity consumed by the vending machines installed on campus and aim to come up with measures to address excessive consumption of electricity. We chose 10 universities located in the city of Seoul and Gyeonggi province and measured electricity consumption of 10 vending machines installed in each university. We then calculated annual electricity consumption of the machines based on previously calculated electricity consumption of 100 samples. According to the result of the calculation, it is estimated that the machines studied on consume 700 KWh a year. This amount could translate into approximately 3,000 tons of annual carbon emissions and 640 million KRW in annual electricity bills. It was also found that there is a significant difference between ordinary vending machines and machines certified for being eco-friendly and energy efficient, in terms of electric power consumption. It is expected that, if the ordinary machines are replaced with the eco-friendly and high-efficient machines, 640 KWh of electricity, 300 kg of carbon, and 61,640 KRW in electricity bills would be saved, which means 28% saving in energy, emissions and bills. In conclusion, we determined that, as one of the ways to reduce electric power consumption and carbon emissions, old vending machines on campus could be replaced with eco-friendly and high-efficient machines.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1600-1602
• /
• 2008

Various applications of exoskeleton system are reported in the area of military, healthcare, and industries. More the user gets help from exoskeleton system, more power is consumed. To resolve this design conflict, we suggest an energy efficient exoskeleton system which compensates muscle fatigue in isotonic and isometric contraction conditions. Fatigue compensated exoskeleton significantly reduced muscle fatigue while consumed less operation power. In addition, the level of fatigue compensation can be managed by motor control using various input profile. It can make user customized exoskeleton system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.113-116
• /
• 1996

The drain current of the MOSFET in the off state(i.e., Id when Vgs=0V) is undesired but nevertheless important leakage current device parameter in many digital CMOS IC applications (including DRAMs, SRAMs, dynamic logic circuits, and portable systems). The standby power consumed by devices in the off state have added to the total power consumed by the IC, increasing heat dissipation problems in the chip. In this paper, hot-carrier-induced degra- dation and gate-induced-drain-leakage curr- ent under worse case in P-MOSFET\`s have been studied. First of all, the degradation of gate-induced- drain-leakage current due to electron/hole trapping and surface electric field in off state MOSFET\`s which has appeared as an additional constraint in scaling down p-MOSFET\`s. The GIDL current in p-MOSFET\`s was decreased by hot-electron stressing, because the trapped charge were decreased surface-electric-field. But the GIDL current in n-MOS77T\`s under worse case was increased.

• 한국콘텐츠학회논문지
• /
• 제7권11호
• /
• pp.84-93
• /
• 2007

본 논문은 시스템 버스와 IP로 구성되는 SoC 플랫폼 기반의 설계에서 온칩 버스의 소비 전력을 시스템 레벨에서 빠르고 정확하게 추정하는 방법을 제시한다. 제안된 소비 전력 추정 모델링은 시스템 구조 변화에 따른 버스 시스템의 소비 전력 변화를 직접 예측할 수 있고 이에 따라 시스템 구성을 최적화할 수 있다. 본 논문에서 소비전력 모델링은 크게 두 부분으로 구성된다. 하나는 버스 시스템 구조에 따른 버스 로직들이 사용하는 소비 전력이고, 다른 하나는 데이터 전송시 발생하는 신호 천이에 의한 버스 라인의 소비 전력이다. 본 모델링을 타겟 멀티미디어 SoC인 MPEG 인코더에 적용하여 92% 이상의 정확도를 가짐을 보였다. 제안된 모델링은 고성능/저전력 멀티미디어 SoC 설계에 활용 가능할 것으로 기대된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.845-849
• /
• 2005

Quick-Response Liquid Powder Display ($QR-LPD^{(R)}$) is a promising device for ultra-low-power applications. Several driving methods for this display were investigated in terms of image quality and power consumption. The power consumed both in a panel and in the output circuits of driver LSIs was evaluated by analog circuit simulation and discussed.