• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.205-215
• /
• 2014

This study was carried out to verify the effect of consumer and supplier characteristics on the utilization of consulting results, quality of consulting service and management performance in the government-support consulting service on SMEs. A survey was conducted and analyzed on SMEs which went through government-support consulting, with the following results of the study. First, for consumer characteristics, consulting awareness was found to have positive effect on the utilization of consulting results while organizational culture have no effect. Second, for supplier characteristics, consultant capability was found to have positive effect on the quality of consulting service but with no effect of government support policy. Third, consumer characteristic of consulting result utilization and supplier characteristic of consulting service quality were both found to have positive effect on management performance. Suggestions and significance of this study are as follows: the result of this study suggests a need to increase the SMEs' understanding of consulting service and the utilization of the consulting results as well as institutional support for enhancing the capability of consultants, a provider of knowledge service. It also has significance in presenting an effective and efficient direction of policy on consulting support project for SMEs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.124-137
• /
• 2018

The main purpose of this study is to find the hotspots of crimes that occur frequently in the space and to derive the appropriate CCTV installation location. One of the characteristics of crime is clustered around past occurrence area, and these crimes are strongly correlated. It is also possible to find the cause of the clusters and the variables that affect the crime through the history of the crime. In addition to the traditional OLS model, spatial differential model including spatial autocorrelation and spatial error model were used to select the variables influencing the five major crime rate, the theft rate and the foreign resident rate. The variables affecting the Five major crimes were positive (+) sign for the welfare and the rate of the bar cluster rate, and negative (-) for the street density. The CCTV area occupies 46% of the hotspots based on the overlapping of the areas where the elderly people are crowded, the bar cluster, many multicultural families, and the areas with low density of street lamps. It turned out. Taking into account the current CCTV operation, the total number of new cases to cover the risk point was 89.

• Management & Information Systems Review
• /
• v.29 no.1
• /
• pp.177-205
• /
• 2010

The major purpose of this study is to investigate the relationships between change management characteristics and implementation performance of ERP. In addition, this research examines the moderating effects of organization characteristics as contextual variables on the relationship between change management characteristics and implementation performance. For these purposes, a research model is developed based on the relevant literature reviews of ERP systems and change management theory. The data have been collected from the 148 enterprises which have implemented ERP systems at least one year ago. The respondents were person in charge of ERP system of each corporation. The results of this study are summarized as follows. Firstly, top management concern and support, consultant support goodness, education, and communication have positive influence upon internal performance. Secondly, consultant support goodness and education are positive influence upon external performance. Lastly, organization characteristics including formalization and centralization have partial moderating effect on the relationship between change management characteristics and implementation performance of ERP. From the analyses, this research have identified change management activities according to the organization structural contexts for the successful implementation of ERP.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.4
• /
• pp.550-569
• /
• 2012

This paper studies the R&D network of the Zhongguancun Cluster, the most representative innovative cluster of the high-tech industry in China at present. For this study, Zhongguancun Cluster was the first high-tech cluster to have been created in China, the current Zhongguancun Cluster has played a leading role in the development of the high-tech industry in China. In addition, the Zhongguancun Cluster has at helped elevate China as a key region in terms of research development in relation to the high-tech industry. In particular, companies evaluate the research development network culture of Zhongguancun cluster positively and this increases their tendency to approach the research development network with an open mind. The main contents in research development network are as follows; (1) joint or consigned research development and technology transfer in the case of research development network between companies, (2) joint or consigned research development, human resource support and employment, technical advice and consultant and technology transfer in the case of industrial-educational relationships (3) joint or consigned research development, technical advice and consultant and technology transfer in the case of industrial-research relationships, (4) financial support and participation in joint research development project held by government in the case of industrial and governmental relationships (5) financing for research development, utilization of research human resources, purchase of research development and use of research development equipment for mediators. The main difficulties in creating a research development network are 'lack of mutual trust', 'financial problems of companies' and 'lack of information'. Especially, the main key obstacles for the most important research development network between industry and government in the case of the Zhongguancun Cluster are 'complicated and strict procedures. Therefore, more accurate and detailed understanding of the conditions and the following institutional measures from government are required for research development among companies.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.86-95
• /
• 2006

Brillouin backscatter is a type of reflection that occurs when light is shone into an optical fibre. Brillouin reflections are very sensitive to changes in the fibre arising from external effects, such as temperature, strain and pressure. We report here several case studies on the measurement of strain using Brillouin reflections. A mechanical bending test of an I beam, deployed with both fiber optic sensors and conventional strain gauge rosettes, was performed with the aim of evaluating: (1) the capability and technical limit of the DTSS technology for strain profile sensing; (2) the reliability of strain measurement using fiber optic sensor. The average values of strains obtained from both DTSS and strain gauges (corresponding to the deflection of I beam) showed a linear relationship and an excellent one-to-one match. A practical application of DTSS technology as an early warning system for land sliding or subsidence was examined through a field test at a hillside. Extremely strong, lightweight, rugged, survivable tight-buffered cables, designed for optimal strain transfer to the fibre, were used and clamped on the subsurface at a depth of about 50cm. It was proved that DTSS measurements could detect the exact position and the progress of strain changes induced by land sliding and subsidence. We also carried out the first ever distributed dynamic strain measurement (10Hz) on the Korean Train eXpress(KTX) railway track in Daejeon, Korea. The aim was to analyse the integrity of a section of track that had recently been repaired. The Sensornet DTSS was used to monitor this 85m section of track while a KTX train passed over. In the repaired section the strain increases to levels of 90 microstrain, whereas in the section of regular track the strain is in the region of 30-50 microstrain. The results were excellent since they demonstrate that the DTSS is able to measure small, dynamic changes in strain in rails during normal operating conditions. The current 10km range of the DTSS creates a potential to monitor the integrity of large lengths of track, and especially higher risk sections such as bridges, repaired track and areas at risk of subsidence.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.4
• /
• pp.499-511
• /
• 2015

A room-and-pillar underground structure is characterized by its grid-type array of galleries. As a result, its construction and economical efficiency can be governed by excavation sequence of galleries. Therefore, this study aims to study the optimum excavation scheme of a room-and-pillar underground structure by considering its various design factors such as ground conditions and excavation sequences. Drill-and-blast method is assumed as a excavation method for a room-and-pillar underground structure. In addition, two kinds of excavation patterns corresponding to a concurrent and a sequential excavation patterns are considered in this study. For the assumed conditions, the structural stability and the construction efficiency based on the number of faces and the travel distance of a jumbo drilling machine are analyzed for the two excavation patterns. Even though the two kinds of excavation patterns show almost the same structural stability as each other, the concurrent excavation pattern is relatively preferable to the sequential excavation pattern in terms of the number of faces in operation and travel distance of a drilling jumbo.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.59-67
• /
• 2015

Overseas expansion of domestic construction over the past 10 years has been fast growing. But as a result of simple construction business practices and a focus on EPC, sales margins was reduced. Domestic construction companies have been trying to redirect business to high-value-added-areas but have faced difficulty because there areas are current monopolized by global leading companies in the field of PMC. They have recently carried out 16 PMC related project in order to expand their experience and increase their competitiveness. Most of these construction companies that do PMC overseas have been focusing on the civil engineering sector. analyzing the important and performance result 50 separate PMC tasks in detail using IPA, it became clear that domestic construction companies should also focus on tasks and were analyzed in order to advance to overseas architecture PMC sector overseas. There are large gaps in the importance and performance result of both the planning and pre-construction phase. Importance compared to the current performance levels in the planning phase gap is largest, pre-construction phase has been analyzed in the following order. In particular, one should strengthen detailed tasks in the planing phase. This study is expected to be used as a basic to determine the performance level and tasks items. It is expected strengthen the capacities of domestic companies in the PMC field, for especially in the high value-aded-areas as indicated in the results of the analysis from this study.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.93-107
• /
• 2016

The purpose of this study is to consider how the competency of management consultants and completion index of consulting. influences the management performance. For this research. we chose 500 small & medium enterprises located all over the country that have implemented management consulting in recent 3 years. And we have done survey for the employees. and gathered and analyzed 294 samples. The result of research is as follows. First, Job competency of management consultants have reliable influence on the business performance and organization effectiveness. Second, Job competency and Common competency of management consultants have reliable influences on the completion index of consulting. Third, Job competency of management consultants and completion index of consulting have reliable influences on management performance. Fourth, Completion index of consulting have mediated job competency of consultants and management performance. Fifth, the impact was estimated that the more manager supporting is, the more job competency of consultant have an effect on organization effectiveness. These findings suggest that through the efficient way to perform successful consulting and identify an association between factors, it can contribute to small & medium enterprise management consulting activated.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.215-228
• /
• 2019

This study micro-analyzed the impact of innovation capabilities on innovation performance by type of CEO, with innovative SMEs being subject to research. In addition, the impact of CEO type on innovative capabilities and the impact of innovative capabilities on innovation performance were studied together. In order to achieve the research objective, we conducted an empirical analysis of 250 innovative small and medium-sized enterprises registered in the medium-term department as research targets and the results are as follows. First, the analysis of the impact of the type of CEO on the capacity of innovation shows that market-oriented, technology-driven and consultant-type CEOs have a significant impact on the amount of technology change reduction, but managed CEOs do not see any statistically significant differences in the amount of technology change reduction areas. Managed CEOs did not see statistically significant differences in the amount of technology change-sensitive areas. In addition, it was analyzed that the current type of CEO of small businesses does not affect the R&D technology digestion capacity of technological innovation capabilities. Second, the analysis of the relationship between innovation capabilities and innovation performance did not have a statistically significant effect. Third, the analysis of the adjustment effect between the type of CEO and the capacity of innovation according to the growth stage of small businesses shows that the technology and the consultant-type CEO affect the amount of the area of technology change, but the managed and market-type CEOs did not have the adjustment effect. Fourth, the analysis of the capacity of innovation and the effect of adjustment between innovation and innovation in the growth phase of innovative SMEs did not have a statistically significant effect.

• Journal of the Korean Geophysical Society
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2005

Defects of dam body which can be induced in seepage or leakage procedure can directly affect dam safety. Therefore, a proper inspection method should be carried out in the first place to find out their positions and sizes. After that, some reinforcement works such as grouting and the corresponding assessment could be taken in a proper way. The dam(center core type earth dam) issued in this study has been in need for intensive diagnosis and reinforcement work, because a lot of slumps similar to cracks, seepage and some boggy area have been observed on the downstream slope. High resolution seismic reflection method was performed on the crest profile twice before and after grouting work(Aug. 2001 and Nov. 2004) aimed at the dam inspection and the assessment of grouting efficiency as well. To enhance the data resolution, P-beam energy radiation technique which can reduce the surface waves and hence to reinforce the reflection events was used. Strong reflection events were recognized in the stack section before grouting work, It seems that the events would be caused by e.g. horizontal cracks with a considerable aperture. Meanwhile such strong reflection events were not observed in the section after grouting. That is, the grouting work was dear able to reinforce the defects of dam body. Hence, the section showed an well arranged picture of dam inner structure. In this sense, seismic reflection method will be a desirable technique for dam inspection and for monitoring dam inner structure as well.