• Advances in concrete construction
• /
• 제9권6호
• /
• pp.537-545
• /
• 2020

In order to reduce the usage of cement slurry in grouting engineering and consume the tunnel excavation waste soil, a new geopolymeric grouting material (GGM) was prepared by combine completely weathered granite (CWG) and blast-furnace slag (BFS), which can be applied to in-situ grouting treatment of completely weathered granite strata. The results showed CWG could participate in the geopolymerization process, and GGM slurry has the characteristics of short setting time, high flowability, low viscosity, high stone rate and high mechanical strength, and a design method of grouting pressure based on viscosity evolution was proposed. By adjusted the content of completely weathered granite and alkali activator concentration, the setting time of GGM were ranged from 5 to 30 minutes, the flowability was more than 23.5 cm, the stone rate was higher than 90%, the compressive strength of 28 days were 7.8-16.9 MPa, the porosity were below 30%. This provides a novel grouting treatment and utilizing excavated soil of tunnels in the similar strata.

• Nutrition Research and Practice
• /
• 제6권4호
• /
• pp.366-374
• /
• 2012

In order to create a worker-friendly environment for institutional foodservice, facilities operating with a dry kitchen system have been recommended. This study was designed to compare the work safety and work environment of foodservice between wet and dry kitchen systems. Data were obtained using questionnaires with a target group of 303 staff at 57 foodservice operations. Dry kitchen facilities were constructed after 2006, which had a higher construction cost and more finishing floors with anti-slip tiles, and in which employees more wore non-slip footwear than wet kitchen (76.7%). The kitchen temperature and muscular pain were the most frequently reported employees' discomfort factors in the two systems, and, in the wet kitchen, "noise of kitchen" was also frequently reported as a discomfort. Dietitian and employees rated the less slippery and slip related incidents in dry kitchens than those of wet kitchen. Fryer area, ware-washing area, and plate waste table were the slippery areas and the causes were different between the functional areas. The risk for current leakage was rated significantly higher in wet kitchens by dietitians. In addition, the ware-washing area was found to be where employees felt the highest risk of electrical shock. Muscular pain (72.2%), arthritis (39.1%), hard-of-hearing (46.6%) and psychological stress (47.0%) were experienced by employees more than once a month, particularly in the wet kitchen. In conclusion, the dry kitchen system was found to be more efficient for food and work safety because of its superior design and well managed practices.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.73-79
• /
• 2016

Purpose: In order to improve the energy performance of existing buildings, so actively promoted green remodeling business. Also, improvement of the performance of envelope system of apartment housing is an absolute. The purpose of implementation of the data base and application plan of the envelope system for green remodeling of apartment housing. Method: For this study, It proposed a classification system of green remodeling envelope system constructed actual to select the applicable representative method and input material of apartment housing for green remodeling. In this study, divided into construction waste processing stage and production phase of the material for the boundary of the system, and implementation the classification system of the envelope system for applicable green remodeling. For this, established 6 environmental impact categories database. Result: As a result of various suggestions were available for case study research, alternative combinations of existing combinations than six kinds of environmental impact insulation system with superior input materials combining 96 kinds, window system, 12 kinds for determining the applicability of the established database. Depending on the account for a large proportion if compared to the detailed analysis of the environmental impact resulting from the production phase and disposal phase was analyzed that the operating management of the necessary input materials. Is considered that the economic performance and integrated energy performance required by the applicable public housing green remodeling evaluation techniques considered for future improvements insulation sheath.

• 한국실내디자인학회논문집
• /
• 제19권3호
• /
• pp.136-144
• /
• 2010

Since most domestic apartment, built in bearing wall system limiting variability of space, in spite of its good durability, cannot accept life style change and is being wasted, dumped scraps of which cause environmental pollution and waste of resources. As a response for this, researches on sustainable housing, that is, 'long-life housing' which has high durability, and variability responding life style change of the resident are in progress in and out of country. Therefore, this article aims, in suggesting the various status appearing on apartment and the interior plan responding the problem, to research on the house plan in the future which can be used continuously instead consuming type of apartment shortly used and discarded with understanding of long-life housing developed in foreign countries, and grasping the factors of application plan. Various reports from previous researches were comparatively analyzed and the studies on the characteristics, the real examples and the types of the surfaces were performed on the experimental model of long-life housing and similar residential surfaces to find the concept to be applied to Long-Life Housing and the introduction method of such concept. This article tries not only to prevent 'scarp and build', the serious cause of environmental pollution, but also to be basic materials for interior construction plan afterwards through 'long-life housing interior design plan' as the new conception which can accept life style and life cycle change.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.86-92
• /
• 2018

건설폐기물 발생량은 매년 꾸준하게 상승하고 있으며 재활용촉진 법이 재정되어있지만 콘크리트-시멘트페이스트 간의 단체분리 저하로 인해 높은 흡수율과 낮은 밀도로 순환골재 품질 기준에 제시되어 있는 콘크리트용 순환골재로서 사용되기 어려운 실정이다. 따라서 본 연구에서는 순환골재의 품위 향상에 필수적인 몰타르 제거를 위하여 다단형 임팩트 크러셔를 사용하였다. 장비의 특성을 분석하는데 있어서 전산 모사 방법인 DEM (Discrete Element Method)를 이용하여 영상 분석을 이용한 내부 입자의 거동 특징과, 투입 입자-장비의 각 부분에 발생하는 에너지의 스펙트럼을 분석하였다. 내부벽, 가이더 및 임펠러의 힘의 크기를 발생하는 횟수에 따라 스펙트럼을 생성하여 효과적인 분석이 가능하였다. 효과적인 박리현상을 발생시키기 위하여, 저에너지 그룹의 충돌 횟수(L)와 파분쇄를 발생시키는 고에너지 그룹의 충돌 횟수(H)의 비율을 토대로 회전속도 900RPM의 조건이 적절함을 확인하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권2호
• /
• pp.115-120
• /
• 2013

본 연구에서는 순환골재를 이용하여 수용액상에서 혼합중금속의 제거능을 평가하였다. 순환골재는 주요 성분인 CaO, $SiO_2$, $Al_2O_3$, $Fe_2O_3$가 약 95% 함유되어 흡착제로서 유리한 조성을 가지고 있다. 동적흡착결과를 유사 1차 모델과 유사 2차 모델로 분석한 결과 두 모델 모두 실험결과에 잘 부합하는 것으로 나타났다. 평형흡착 실험은 Langmuir 모델에 잘 부합했고, $Cu^{2+}$ > $Pb^{2+}$ > $$Zn^{2+}{\simeq_-}Ni^{2+}$$ > $Cd^{2+}$순으로 흡착량이 높았다. 용액의 pH가 6에서 10로 증가함에 따라서 흡착률은 증가하는 것으로 나타났다. 또한, 순환골재의 양이 증가함에 따라서 중금속의 흡착률은 증가하였지만, 단위 질량당 흡착량은 감소하였다. 본 연구 결과를 통해 순환골재는 중금속을 효율적으로 제거할 수 있는 흡착제로 판단된다.

• 한국습지학회지
• /
• 제13권2호
• /
• pp.363-375
• /
• 2011

최근 하수관거 매설과 하수종말처리장 등의 건설로 인해 도시하천의 수질이 크게 개선되고 있으나, 하 폐수 처리시설의 부족으로 하천으로 유입되는 다양한 오염물질은 수중생태계 교란과 적조를 발생시키고 있다. 울산 태화강의 하류부는 하폭이 크고 하상경사가 매우 완만한 감조하천으로써 갈 저수기에는 유속이 매우 느리게 된다. 게다가 약 1.2km 떨어져 있는 2개 교량의 전면기초로 된 교각보호공으로 인해 흐름이 정체되고 오염물질이 퇴적되어, 수년전부터 발생하고 있는 태화강 적조의 원인이 되거나 적조를 활성화 시키고 있다. 본 연구에서는 RMA2모형을 이용하여 두 교량의 교각을 독립기초로 개선하고 흐름을 소통시킬 수 있는 통수단면을 확보했을 때, 수리학적으로 개선될 수 있는 유속과 유량의 변화폭을 모의하였다. 그 결과 유속은 최대 약 103%, 유량은 최대 61% 증가하는 것으로 나타났다. 이는 적조를 직접 소멸시킬 수는 없으나 적조발생을 억제하거나 감소시킬 수 있으며, 오염물질의 퇴적을 막아 적조발생 원인을 근원적으로 제어할 수 있는 것으로 판단된다.

• 한국대기환경학회지
• /
• 제18권6호
• /
• pp.539-546
• /
• 2002

The physicochemical properties of solid wastes generated from seven highway service areas, four branch offices, and one construction site were analyzed in concert with air pollutants including heavy metals emitted from near-by small-scale incinerators. The amount of solid wastes generated from highway areas has been increasing with recent increases in the number of highways and passengers. Twelve incinerators examined in this study generally had capacity smaller than 100 kg/hr, most of which were equipped with cyclone for dust removal. It was seen that the concentrations of the gas-phase air pollutants (e.g., SO$_2$, NO$_{x}$, HCl and H$_2$S) were above the acceptable emission standards except one or two sites. CO concentrations at all incinerators were also higher due to incomplete combustion. In addition, particulate matters showed concentration six times higher at their maximum. The results of heavy metal analysis showed that the concentrations of Cu, Cd, and Ni satisfied the emission standards. whereas Pb at one site and Zn at five sites exceeded the standards. Cr measurement results indicated that 9 of 12 incinerators had higher values than the standard; especially one branch office showed nine times higher than normal concentration. In order to satisfy more stringent emission standards in the near future, it is necessary to install air pollution control system and to develop an intensified management plan.n.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1178-1187
• /
• 2006

The purpose of this study is to conduct a questionnaire survey on the actual conditions of the working uniform and protective equipment put on by street cleaners, then to identify their inconvenience and problems and to draw solutions to improve them, and finally to design a spring-and-autumn street cleaner uniform which has enhanced functionalities such as motional flexibility, safety and soil proof. The questionnaire survey of this study was done by street cleaners who were in charge of street cleaning and collecting the recyclable waste. The result of this study, easily worn-out parts of the working clothing were the sleeve hems and the front part on the upper uniform, and the trouser hems and zipper on the lower uniform. Easily soiled parts were the sleeve hems, parts of arm on the upper uniform, and the trouser hems and knee parts on the lower uniform. Based on the results of the questionnaire survey, the sample uniforms were designed in consideration of material, design and pattern. A soil-proof material was used for easily soiled parts such as sleeve hems, knee parts and trouser hems. Reflective material was applied to the parts such as chest, back and the side lines of sleeves and trousers to raise visibility in working and to ensure safety. A crease was given to each side of the back. The height of sleeve cap was lowered to lift the motional flexibility of back and arm parts. Darts were applied to elbow and knee parts for a three-dimensional design. Gussets were inserted in the thigh part to give it activity. Then quantitative evaluation and a sensory evaluation, which was composed of outward appearance, motional flexibility and fitness for field operation, were conducted. According to these evaluations, the sample uniform was found to be more satisfactory than current uniform.

• 에너지공학
• /
• 제26권4호
• /
• pp.45-56
• /
• 2017

Coal power plants produce electricity for the nation's power grid, but they also produce more hazardous air emissions than any other industrial pollution sources. The quantity is staggering, over 386,000 tons of 84 separate hazardous air pollutants spew from over 400 plants in 46 states. In South Korea also, annual coal ash generation from coal-fired power plants were about 6 million tons in 2015. Pollutants containing particulate matter 10, 2.5 (PM10, PM2.5), heavy metals and dioxins from coal-fired power plant. The emissions threaten the health of people who live near these power plants, as well as those who live hundreds of miles away. These pollutants that have long-term impacts on the environment because they accumulate in soil, water and animals. The present study is to investigate the physical and chemical characteristics of coal-fired power plant fly ash and bottom ash contains particulate matter, whose particulate sizes are lower than $PM_{10}$ and $PM_{2.5}$ and heavy metals. There are wide commercial technologies were available for monitoring the PM 2.5 and ultra-fine particles, among those carbonation technology is a good tool for stabilizing the alkaline waste materials. We collected the coal ash samples from different coal power plants and the chemical composition of coal fly ash was characterized by XRF. In the present laboratory research approach reveals that potential application of carbonation technology for particulate matter $PM_{10}$, $PM_{2.5}$ and stabilization of heavy metals. The significance of this emerging carbonation technology was improving the chemical and physical properties of fly ash and bottom ash samples can facilitate wide re use in construction applications.