• Child Health Nursing Research
• /
• v.19 no.1
• /
• pp.29-38
• /
• 2013

Purpose: This study was done to develop a cell phone addiction scale for Korean parents of young children, and to evaluate the reliability and validity of the developed scale. Methods: The scale was developed through construction of a conceptual framework, generation of initial items, verification of content validity, selection of secondary items, preliminary study, and extraction of final items. Participants were 465 parents and 178 children. Data were analyzed using item analysis, factor analysis, criterion related validity, internal consistency, and split-half reliability. Results: Twenty items were categorized into three factors explaining 60.3% of total variance. Factors were named as withdrawal - 4 items, loss of control - 9 items, and persistence - 7 items. Scores for the scale were significantly correlated with self-control, impulsiveness, cell phone use, and cell phone addiction of children as measured by a scale for Korean children. Cronbach's alpha coefficient for the 20 items was .94, and Guttman coefficient was .87. Scale scores identified children as high risk users, at risk users, or average users by standard scores. Conclusion: The results suggest that the cell phone addiction scale for Korean parents is a reliable and valid instrument to measure cell phone addiction in young children.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.93-101
• /
• 2005

The formation of slopes is unavoidable under the special circumstance of Korea where $7%$ of the whole area are composed of mountains and civil engineering projects such as road and site developments are increasing with industrial development and horizontal expansions of urban area. Stability of slopes is one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall is concentrated in summer season and the localized torrential downpour is getting more frequent recently. As a result of these circumstances, partial slope failures by debris flow of the high water content soils occur frequently in cut soil slopes. In this case of debris flow slope failure, slope declination method is selected fur the stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. For debris flow failure slopes, this study secured the safety of slopes by preventing the inflow of rainwater and scour using geosynthetics-reinforced embankment, and created nature-friendly slopes by planting trees on the slopes.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.11
• /
• pp.119-127
• /
• 2013

Recently, several researches on the development of new economical foundation types have been performed to support floating structures as many offshore structures have been constructed. This study focused on the evaluation of bearing capacity of group suction piles, which are connected by a concrete pile cap. The offshore floating structures are mainly subjected to horizontal loading, so the horizontal bearing capacities of the group suction piles were analyzed by performing 3-dimensional finite element analyses. The group suction piles are expected to behave as a rigid pile due to its shallow embedded depth. Therefore, the detailed soil modeling was necessary to simulate the bearing behavior of soils under low confining pressure. The modulus and the strength of soils were modelled to increase with effective confining pressure in soils. For the parametric study, the center-to-center spacing between piles was varied and two soil types of clay and sands were applied. The analyses results showed that the yielding load of the group pile increased with the increase of the pile spacing and the yielding load of the group piles with 5D spacing was about 3 times larger than that of the single pile with free rotation.

• 대한공업교육학회지
• /
• v.37 no.2
• /
• pp.21-55
• /
• 2012

The purpose of this study was to develop teacher-training for improvement of teaching efficacy of technology teacher. The study was carried out through Delphi research method. It was executed for investigating the professional and wide-range opinions of expert panel to examine the validity. The validity was confirmed by concurrence ratio, convergence ratio, contents validity ratio (CVR). Major results of this study were as follows: First, necessity, nature, purpose of teacher-training for improvement of teaching efficacy of technology teacher was set up. And this teacher-training have 12 objectives in 3 domains (cognitive, affective, psychomotor). Second, contents of this teacher-training were designed to be applicable for 10 modules (300 hours). For example, module1 (introduction of technology education), module2 (construction technology), module3 (information communication technology), etc. Third, educational method, training educator, evaluation method of this teacher-training were developed. Fourth, each module of this teacher-training is 30 hours in length. And summer or winter vacation is appropriate for this teacher-training time. Appropriate teacher-training time is six hours a day. Fifth, roles of educational institution for this teacher-training were suggested. Sixth, strategies to vitalize this teacher-training were suggested.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.96-108
• /
• 2011

Going abreast of high public concerns on the environment, the need of environmental modeling has been increased to assess the impact of space exploitation of environment. GIS offers potential solutions to the many problems encountered during water-quality modeling. But there are also many problems associated with the modeling. The preparation of necessary parameters for the modeling can be complicated. Also, the results from one model can be different from each other even the same area is analyzed. This paper aims to develop the data processing system to couple the Qual2E and HyGIS in which Qual2E input and output data files can be created, modified and processed using HyGIS and assess the performance of the system. A structural analysis and standardization of modeling are conducted to identify data flow and processing of Qual2E. Algorithms of the defined processors are designed and developed as component modules. The data model of HyGIS-Qual2E is designed, and GUI(Graphical User Interface) is developed using Visual Basic 6.0 and GDK.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.523-533
• /
• 2015

A reactor containment acts as a final barrier to prevent leakage of radioactive material due to the possible reactor accidents into external environment. Because of the functional importance of the containment building, the SIT(Structural Integrity Test) for containments shall be performed to evaluate the structural acceptability and demonstrate the quality of construction. An initial numerical analysis was performed to simulate the results obtained from the SIT for a prestressed concrete(PSC) structure. But the analysis results by the initial model expected smaller displacements than the measured ones by 30% at some locations. Accordingly, the research and development to improve the initial model to corelate the measured results of the SIT more properly have been performed. In this paper, the effects of the loss of concrete due to duct for tendons and the contact of duct and tendons in un-bonded tendon system are mainly evaluated based on the preliminary analysis results. In addition, the importances of the proper definition of mesh connectivity among structural elements of concrete, liner plates, rebars and tendons are discussed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.289-296
• /
• 2014

The rebar detailing is an important work influencing the final performance and quality of RC structures. But it is one of the most irrational and illogical activity in construction site. Many groups of workers, including main contractors, structural engineers, shop drawers, rebar fabricators, and etc., participate in this activity. A loosely-organized process for this activity is apt to produce a big amount of rebar loss or even degraded structures. A 3-dimensional rebar auto-placing system, called as Rebar Hub, has been designed and implemented in this research. Rebar Hub provides a totally integrated service from 3D structural modeling of buildings to rebar auto-placing considering anchorage, splice, and the length of ordered rebar. In addition, Rebar Hub can recognize the 2D drawing CAD files and then build 3D structural models which are used for the start point of 3D rebar auto-placing. After rebar auto-placing, each members of the 3D structural model have rebar information belonging to them. It means that the rebar information can be used for the afterward works such as quantity-survey, manufacturing and fabrication of rebars. Rebar Hub is showing outstanding performance while applying to practical projects. It has almost five times productivity and reduces the rebar loss up to 3~8% of the initially-surveyed amount of rebar.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.551-558
• /
• 2005

The setting and hardening of concrete is accompanied with nonlinear temperature distribution caused by development of hydration heat of cement. Especially at early ages, this nonlinear distribution has a large influence on the crack evolution. As a result, in order to predict the exact temperature history in concrete structures it is required to examine thermal properties of concrete. In this study, the convection heat transfer coefficient which presents thermal transfer between surface of concrete and air, was experimentally investigated with variables such as velocity of wind, curing condition and ambient temperature. At initial stage, the convection heat transfer coefficient is overestimated by the evaporation quantity. So it is essential to modify the thermal equilibrium considered with the boiling effect. From experimental results, the convection heat transfer coefficient was calculated using equations of thermal equilibrium. Finally, the prediction model for equivalent convection heat transfer coefficient including effects of velocity of wind, curing condition, ambient temperature and boiling effects was theoretically proposed. The convection heat transfer coefficient in the proposed model increases with velocity of wind, and its dependance on wind velocity is varied with curing condition. This tendency is due to a combined heat transfer system of conduction through form and convection to air. From comparison with experimental results, the convection heat transfer coefficient by this model was well agreed with those by experimental results.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.19-25
• /
• 2020

As the number of mobile device users increases, research on various user authentication methods has been actively conducted to protect sensitive personal information. Knowledge-based techniques have the disadvantage that security is deteriorated due to easy exposure of authentication means, and proprietary-based techniques have a problem of increasing construction cost and low user convenience to use the service. In order to solve this problem, a FIDO authentication system, which is a user authentication method using a smart device, has been proposed. Since the FIDO authentication system performs authentication based on the biometric information of the user, the risk of the authentication means being leaked is low, and since the authentication information is stored in the user's smart device, the user information due to server hacking is solved. Through this, it is possible to select and utilize user authentication technology suitable for the security level of the service. In this paper, we introduce the FIDO authentication system, explain the main parts required for FIDO UAF client-server development, and show examples of implementation using UAF open source provided by ebay.

• Journal of the Korean association of regional geographers
• /
• v.12 no.4
• /
• pp.475-495
• /
• 2006

This paper is to analyse a changing space of energy flows in Northeast Asia from geopolitical and geoeconomic perspectives that have been recently promoted for energy security of countries in this region. The research is based on an analytical framework in an integration of political ecology and political economy. Because of an ever-increasing input of energy resources for economic growth and of dramatically increasing price of crude oil and recent instability of oil market, South Korea, China and Japan have been deeply concerned with energy security and conducted very actively geopolitical strategies. And hence the space of energy flows in the region is now in a process of dynamic reconfiguration, in which the project for development of oil and natural gas fields in East Siberia and construction of pipelines to transport them can be seen as one of competitive issues among these countries. In spite of worrying about stagflation due to rapid increase of oil price, such geo-strategies for energy security and reconfiguration of space of energy flows seem to keep the accumulation of capital in this region continue with generation of huge privatized oil companies.